Post Buy Requirement
TI
Mohali, Punjab, India
Add Review

Other Products / Services #1468914

Dingo Remote Controller

We are offering dingo remote controller.
features & benefits
feature benefit
remote control allows clean-up work in areas too hazardous for an operator.
remote start and stop allows the machine to be started and stopped remotely, so the operator does not need to enter a hazardous area.
emergency stop anyone can shut down the machine instantly without the control panel. (machine can be shut down either on the control panel or at the machine)
user friendly control panel the control panel sits comfortably around the operator's waist. The levers of the control panel are in the same position as the levers of the dingo making it easy to master.
fully proportional and adjustable control panel this makes controlling the dingo smooth and safe and can be adjusted to suit the environment.
adaptability whether you require buckets or trenchers, levellers or forks, the dingo can be easily adapted.
patented cast steel chassis k9-4 remote controlled unique cast steel chassis is not only the strongest in its class, but the innovative design allows a huge 27hp engine to be fitted into an envelope small enough to get to the most confined work sites.
970mm - 790mm machine width when fitted with a narrow access kit the k9-4 remote controlled measures just 790mm wide, making it one of the few mini diggers on the market that can fit through a standard doorway.
1.835m lift height the k9-4 remote controlled has an impressive lift height that will allow you to load most small trucks.
325kg swl the k9-4 remote controlled safe working load of 325kg allows it to carry the full range of industrial attachments. (swl is rated at 50% of what the machine is capable of lifting).
awd system dingo's all wheel drive system means power to each wheel and no drive chain maintenance.
marine grade aluminium body panels rust resistant, can take plenty of punishment and still protect your valuable investment. The panels can be removed easily giving you full access to the engine and hydraulics systems, making servicing a breeze.
2 pump hydraulic system a standard feature on all dingos is the unique "tandem pump" hydraulic system which improves oil efficiency, directs the flow and power to where they are needed most, and prolongs duty cycle, enabling the dingo to work for extended periods.
3400psi hydraulic relief pressure the k9-4 remote controlled industry leading hydraulic relief pressure means that no other mini digger can drive attachments with the same power.
2 hydraulic outlets this standard feature means the k9-4 remote controlled can power many attachments including stump grinders, block splitters etc.
teflon bushes the k9-4 remote controlled encompasses teflon bushes in the joints for a low maintenance, no mess joint.
27hp diesel engine the k9-4 remote controlled comes standard fitted with the latest tier 3 low emission diesel engine.
serviceable hydraulic tank access to the hydraulic tank on all dingo models, allows the hydraulic system to be thoroughly cleaned in the manufacture process, and ease of accessibility to the internal systems.
View Complete Details

Sheet Metal Components

We offer wide range of sheet metal components.
We offer wide range of cnc sheet metal components.
All types of sheet metal fabrication.
Product development for sheet metal products.
View Complete Details

Digging Services

We undertake hole digging jobs for tree plantation projects.width options 150 mm to 600 mmdepth: 0 to 1200 mm
time per hole: approx 1.5 minutesholes per day approx 500 depending upon soil type and hole size
machine available for rent and sale.
View Complete Details

Tree Plantation Machine

We are offering tree plantation machine.
we undertake hole digging jobs for tree plantation projects.width options 150 mm to 600 mmdepth: 0 to 1200 mm
time per hole: approx 1.5 minutesholes per day approx 500 depending upon soil type and hole size
machine available for rent and sale.
View Complete Details

Dingo Mini Digger

We are offering dingo mini digger.
As with all dingo models, the k9-2 is covered by an industry leading warranty, coupled with
quality trained service technicians to ensure that your machine will keep you working.
Its no wonder that dingo is the world renowned no. 1 choice in mini diggers.
The dingos robust structure, narrow frame, adaptability and maneuverability are
all unique features which give this machine the ability to go where no machine has
gone before.dingos reputation for excellence has made it the recognized name for mini diggers.
Standard features
2 pump hydraulic system
auxiliary hydraulic outlet
awd system
hard wearing durable powder
coat finish
hard wearing dingo tyres
datadot theft prevention system
quick hitch system
easy soft touch operator controls
safety features
solid operating platform
machine stability
safety hydraulic relief valve
concealed and protected rupture
resistant plastic fuel tank
low engine noise
balanced lifting and tie down points
engine shut-off roll over protection
(mercury switch) *optional feature
optional features to customise your machine
reverse buzzer
rotating beaco
traction options for all conditions
including narrow wheels or solid.
K9-2
engine
make vanguard (petrol)
power 16hp / 11.8kw
performance
hydraulic pumps 2 pumps
pump sizes 8 & 1.5 cc
relief pressure (drive) 193 bar (2800psi)
relief pressure (aux) 206 bar (3000psi)
hydraulic pump output 34 l/min
travel speed (with overdrive 0-7.8 km/h
rate lift capacity swl: 125 kg
mwl: 250 kg
wheel motors 4 x 33cu in
auxiliary hydraulic outlets
dimensions
a. Overall width 780mm
b. Overall length 1400mm
c. Overall height 1200mm
d. Maximum operating height with 4 in 1 bucket 1902mm
e. Turning radius with 4 in 1 bucket 1160mm
f. Angle of departure 27
g. Wheel base 650mm
h. Ground clearance 150mm
i. Dump height std bucket 840mm
j. Dump height with 4 in 1 bucket 1220mm
k. Reach fully raised 4 in 1 bucket 880mm
l. Height to hinge pin 1350mm
m. Machine width with 4 in 1 bucket 780mm
hydraulic reservoir 34 l
machine mass 540kg (approx)
View Complete Details

Mini Excavator

We are offerong mini excavator, mini trencher & mini skid steer on hire. As with all dingo models, the k9-2 is covered by an industry leading warranty, coupled with
quality trained service technicians to ensure that your machine will keep you working.
its no wonder that dingo is the world renowned no. 1 choice in mini diggers.
the dingos robust structure, narrow frame, adaptability and maneuverability are
all unique features which give this machine the ability to go where no machine has
gone before.dingos reputation for excellence has made it the recognized name for mini diggers.
standard features
2 pump hydraulic system
auxiliary hydraulic outlet
awd system
hard wearing durable powder
coat finish
hard wearing dingo tyres
datadot theft prevention system
quick hitch system
easy soft touch operator controls
safety features
solid operating platform
machine stability
safety hydraulic relief valve
concealed and protected rupture
resistant plastic fuel tank
low engine noise
balanced lifting and tie down points
engine shut-off roll over protection
(mercury switch) *optional feature
optional features to customise your machine
reverse buzzer
rotating beaco
traction options for all conditions
including narrow wheels or solid.
k9-2
engine
make vanguard (petrol)
power 16hp / 11.8kw
performance
hydraulic pumps 2 pumps
pump sizes 8 & 1.5 cc
relief pressure (drive) 193 bar (2800psi)
relief pressure (aux) 206 bar (3000psi)
hydraulic pump output 34 l/min
travel speed (with overdrive 0-7.8 km/h
rate lift capacity swl: 125 kg
mwl: 250 kg
wheel motors 4 x 33cu in
auxiliary hydraulic outlets
dimensions
a. Overall width 780mm
b. Overall length 1400mm
c. Overall height 1200mm
d. Maximum operating height with 4 in 1 bucket 1902mm
e. Turning radius with 4 in 1 bucket 1160mm
f. Angle of departure 27
g. Wheel base 650mm
h. Ground clearance 150mm
i. Dump height std bucket 840mm
j. Dump height with 4 in 1 bucket 1220mm
k. Reach fully raised 4 in 1 bucket 880mm
l. Height to hinge pin 1350mm
m. Machine width with 4 in 1 bucket 780mm
hydraulic reservoir 34 l
machine mass 540kg (approx).
View Complete Details

Mini Excavator Rental Services, Mini Trencher Rental Services

As with all dingo models, the k9-2 is covered by an industry leading warranty, coupled with
quality trained service technicians to ensure that your machine will keep you working.
its no wonder that dingo is the world renowned no. 1 choice in mini diggers.
the dingos robust structure, narrow frame, adaptability and maneuverability are
all unique features which give this machine the ability to go where no machine has
gone before.dingos reputation for excellence has made it the recognized name for mini diggers.
standard features
2 pump hydraulic system
auxiliary hydraulic outlet
awd system
hard wearing durable powder
coat finish
hard wearing dingo tyres
datadot theft prevention system
quick hitch system
easy soft touch operator controls
safety features
solid operating platform
machine stability
safety hydraulic relief valve
concealed and protected rupture
resistant plastic fuel tank
low engine noise
balanced lifting and tie down points
engine shut-off roll over protection
(mercury switch) *optional feature
optional features to customise your machine
reverse buzzer
rotating beaco
traction options for all conditions
including narrow wheels or solid.
k9-2
engine
make vanguard (petrol)
power 16hp / 11.8kw
performance
hydraulic pumps 2 pumps
pump sizes 8 & 1.5 cc
relief pressure (drive) 193 bar (2800psi)
relief pressure (aux) 206 bar (3000psi)
hydraulic pump output 34 l/min
travel speed (with overdrive 0-7.8 km/h
rate lift capacity swl: 125 kg
mwl: 250 kg
wheel motors 4 x 33cu in
auxiliary hydraulic outlets
dimensions
a. Overall width 780mm
b. Overall length 1400mm
c. Overall height 1200mm
d. Maximum operating height with 4 in 1 bucket 1902mm
e. Turning radius with 4 in 1 bucket 1160mm
f. Angle of departure 27
g. Wheel base 650mm
h. Ground clearance 150mm
i. Dump height std bucket 840mm
j. Dump height with 4 in 1 bucket 1220mm
k. Reach fully raised 4 in 1 bucket 880mm
l. Height to hinge pin 1350mm
m. Machine width with 4 in 1 bucket 780mm
hydraulic reservoir 34 l
machine mass 540kg (approx)
View Complete Details

Combine Holding Plate

We are offering combine holding plate.
clients can avail from us a high quality range of combine holding plate. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine holding plate is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Forklift Rocker Arm

We are offering forklift rocker arm.
clients can avail from us a high quality range of fork lift rocker arm. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Fork lift rocker arm is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Frame Assembly

We are offering frame assembly left and right.
Clients can avail from us a high quality range of combine frame assembly . Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine frame assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Structural Fabrication

We are offering structural fabrication.
Clients can avail from us a high quality range of track combine frame assembly. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Track combine frame assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Dingo Equipment

We are offering dingo equipment.
The ever popular dingo k9-3 has evolved again with some great new features. Improvement in engine and hydraulic technologies combine with dingo innovation to form the allnew 4 wheel motor awd. Increase in hydraulic flow andpressures enable greater ground speed, giving more power, result - the new awd works harder and faster. The k9-3 awd operates an extensive range of specialized dingo attachments. For more information on the available attachments, please see our attachments brochure or visitwww. Dingo. Com. Aufeatures & benefits of the k9-3 awdadaptabilitythe dingo has a unique ability to be adapted to suite your individual needs. Whether you require wheels or tracks, buckets or trenchers, in a minimal amount of time the dingocan be transformed easily to suit the job that its required for. 4 wheel motors dingo equipment australia pioneered the technology that lead to the production of the first ever mini digger with 4 motors and no mechanical chain drive system. The latest edition to the dingo pack, the k9-3 awd also features full hydraulic drive to each wheel, easy access to the wheel motors, and no maintenance or adjustment to drive chains. Increased hydraulic flow & pressure (diesel models)with the new generation of perkins and cat enhanced technology tier 3 diesel engines, the k9-3 awd is notable to deliver more hydraulic flow than ever before. This means greater ground speed and more efficient attachment operation. Safety hydraulic relief valves compensates for the greater pressure, and preventsunsafe overloading of the system. As with all dingo models, the k9-3 awd(all wheel drive) is covered by an industryleading warranty, coupled with quality trained service technicians to ensure that your machine will keep you working. Its no wonder that dingo is the world renowned no. 1 choice in mini diggers. The dingos robust structure, narrow frame, adaptability and manoeuvrability are all unique features which give this machine the ability to go where no machine hasgone before. Dingos reputation for excellence has made it the recognized name for mini diggers. Ask for the machine that your customers will ask for by name.
sealed roller bearingsthe k9-3 awd encompasses sealed roller bearings and teflonbushes in the joints for a low maintenance, no mess joint. No mess, no fuss equals lower ownership cost. Serviceable hydraulic tankaccess to the hydraulic tank on all dingo models, allows thehydraulic system to be thoroughly cleaned in the manufactureprocess, and ease of accessibility to the internal systems. 2 lift ramsensuring stable lifting, with no excess pressure on the chassisor arms. Datadot theft prevention systemtiny dots laser-etched with a unique number which issprayed onto the dingo. The random number is trackedon the data dot system.
enginemake vanguard (petrol) perkins (diesel)catpower 23hp 20hp / 15kwperformancehydraulic pumps 2 pumpspump sizes 9 & 3 cc 11 & 3 ccrelief pressure (drive) 220 bar (3200psi)relief pressure (aux) 206 bar (3000psi)hydraulic pump output 43 l/min 47 l/mintravel speed (with overdrive) 0-8. 8 km/h 0-9. 5 km/hrate lift capacity swl: 250 kgmwl: 500 kgwheel motors 4 x 29 cu inauxiliary hydraulic outlets 1dimensionsa. Overall width 880mm - 1050mmb. Overall length 1565mmc. Overall height 1200mmd. Maximum operatingheight with 4 in 1 bucket 2080mme. Turning radius with4 in 1 bucket 1300mmf. Angle of departure 20g. Wheel base 710-800mmh. Ground clearance 135mm - 175mmi. Dump height std bucket 1240mmj. Dump height with4 in 1 bucket 1750mmk. Reach fully raised4 in 1 bucket 600mml. Height to hinge pin 1680mmm. Machine width with4 in 1 bucket 1050mmhydraulic reservoir 60lmachine mass 745kg (approx) 825kg (approx)warrantyengine warranty 2 years 3 years/1000hrs*product warranty 3 years / 1000hrs*.
View Complete Details

Hole Digging Services For Greenhouse

We provide hole digging services for greenhouse.
overview
the dingo post hole digger can dig holes up to a 750mm diameter and a depth of at least 1.5 metres, up to 2.3 with an extension. Power is transferred to the augers by the post hole digger drive head. With the correct digging teeth fitted, the dingo can be used to dig through concrete, reinforced road base and bitumen. Anti swing system - fitted with an anti swing system improving safety by reducing the potential for the auger to swing back and forth when travelling. Auger mate - a lifter for loading or unloading augers from dingo trailers.
specifications
digging depth: augers 300mm and over diameter - 1.5m; augers under 300mm - 1.1m + extensions
cut width: 400mm
teeth types: earth, tungsten, rock.
flow: 32 l/min
pressure: 206bar (3000psi)
torque: 1800nm
speed: 90rpm
approx weight: phd drive head = 64kg augers: 12 - 58kg
used for: digging post holes in soil, clay, sand, rock/shale.
used by: contractors, landscapers, and hire companies.
used with: cement mixer, post hole mate, auger mate,
and auger extensions.
View Complete Details

Hole Digging For Greenhouse

OVERVIEW
The Dingo Post Hole Digger can dig holes up to a 750mm diameter and a depth of at least 1.5 metres, up to 2.3 with an extension. Power is transferred to the augers by the Post Hole Digger drive head. With the correct digging teeth fitted, the Dingo can be used to dig through concrete, reinforced road base and bitumen. Anti Swing System - Fitted with an Anti Swing System improving safety by reducing the potential for the auger to swing back and forth when travelling. Auger Mate - A Lifter for loading or unloading augers from Dingo trailers.
SPECIFICATIONS
Digging Depth: Augers 300mm and over diameter - 1.5m; Augers under 300mm - 1.1m + extensions
Cut Width: 400mm
Teeth Types: Earth, Tungsten, Rock.
Flow: 32 l/min
Pressure: 206Bar (3000psi)
Torque: 1800Nm
Speed: 90RPM
Approx Weight: PHD Drive Head = 64kg Augers: 12 - 58kg
Used For: Digging post holes in soil, clay, sand, rock/shale.
Used By: Contractors, Landscapers, and Hire Companies.
Used With: Cement Mixer, Post Hole Mate, Auger Mate,
and Auger Extensions.
View Complete Details

Cement Mixer For Greenhouse

We are offering cement mixer for greenhouse.
Overview
the dingo cement mixer fits onto the dingo post hole digger which drives the augers. To keep the mixer pointing upwards, the swing movement of the post hole digger is pinned in an upwards facing position. The dingo cement mixer is a mobile cement mixer with forward and reverse bowl motion. The design allows the mixer to reverse similar to a ready mix truck.
Specifications
capacity: 0.1cu.mdrum speed: 20rpm (recommended)rotation: bi-rotationallength: 60mmwidth (diameter): 630mmapprox weight: 32kgused for: mixing cement, stock feeds and stabilised sand.used by: fencing contractors, builders, pool builders, landscapers, paving contractors, playground installers and national parks.
View Complete Details

Channel Assembly

We are offering channel assembly.
clients can avail from us a high quality range of combine channel assembly. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine channel assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Tractor Parts, Combine Parts

We are offering tractor parts, combine parts.
clients can avail from us a high quality range of combine frame assembly. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine frame assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Bus Body Parts

We are offering bus body parts.
Clients can avail from us a high quality range of bus handle base. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Bus handle base is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Combine Connecting Bar End

We are offering combine connecting bar end.
clients can avail from us a high quality range of combine connecting bar end. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine connecting bar end is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Combine Gear Box

We are offering combine gear box.
clients can avail from us a high quality range of combine gear box mtg bkt. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine gear box mtg bkt is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Trencher For Railway Line

OVERVIEW
The Dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The Dingo Trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
SPECIFICATIONS
Digging Depth: 900mm
Cut Width: 100, 150, 200, 250, and 300mm
Teeth Types: Cup or Diggatac
Features: Manual side shift, 42mm chain (frost), 300mm diameter single removable auger
Flow Range: 40-47l/Min
Frame Width: 1010mm
Side Shift Travel: 485mm
Min Side Clearance: 210mm
Total Dig Depth 1016mm
Used For: Digging trenches in soil, clay, sand,
rock and shale
Used By: Contractors, Plumbers, Landscapers, Electricians and Hire Companies
Goes with: Crumber Bar, Adapter Kits, Blade,
Turf Cutter and Under Road Borer.
View Complete Details

Trencher Work For Telecom

We are offering trencher work for telecom.
overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Agricultural Trencher

We are offering agricultural trencher.
Overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
Specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Lt Cable Laying Machine On Hire

We are offering lt cable laying machine on hire.
We give trenching and hole diggers on hire as well as sale. 500 holes per day trenching
max 10 inch width
1. 1 meter depth
min 4 inch x required depth upto 1. 1 meter.
View Complete Details

Trenching Services For Telecom

We provide trenching services for telecom.
Overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Trenching Services For Agriculture

We provide trenching services for agriculture.
Overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Cable Laying Machine

We are offering cable laying machine.
we give trenching and hole diggers on hire as well as sale.500 holes per day trenching
max 10 inch width
1.1 meter depth
min 4 inch x required depth upto 1.1 meter.
View Complete Details

Trenchers

  • Country of Origin India
  • Type Trench Digger Machine

We are offering trencher. Overview the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability. Specifications digging depth: 900mm cut width: 100, 150, 200, 250, and 300mm teeth types: cup or diggatac features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger flow range: 40-47l/min frame width: 1010mm side shift travel: 485mm min side clearance: 210mm total dig depth 1016mm used for: digging trenches in soil, clay, sand, rock and shale used by: contractors, plumbers, landscapers, electricians and hire companies goes with: crumber bar, adapter kits, blade, turf cutter and under road borer.

View Complete Details

Trenching Services

We provide trenching services.
overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Trenching Services In Rural Areas

Product specification
overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Cnc Plasma Profile Cutting Machine

We offer cnc plasma profile cutting (up to 1mm to 35mm) on hyper therm hpr130xd with true hole technology. Ms plasma cutting ss plasma cutting aluminum plasma cutting.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Himanshu Sachdeva (Techno Industrial Corporation)
  • Alpha Drug Road, Village Samalheri, Ambala Chandigarh Highway, Lalru, Mohali, Punjab - 140501, India
  • Share us via
List of Other Products by Techno Industrial Corporation from Mohali, Punjab.
Post Buy Requirement
TI
Mohali, Punjab, India
Add Review

Other Products / Services #1468914

Dingo Remote Controller

We are offering dingo remote controller.
features & benefits
feature benefit
remote control allows clean-up work in areas too hazardous for an operator.
remote start and stop allows the machine to be started and stopped remotely, so the operator does not need to enter a hazardous area.
emergency stop anyone can shut down the machine instantly without the control panel. (machine can be shut down either on the control panel or at the machine)
user friendly control panel the control panel sits comfortably around the operator's waist. The levers of the control panel are in the same position as the levers of the dingo making it easy to master.
fully proportional and adjustable control panel this makes controlling the dingo smooth and safe and can be adjusted to suit the environment.
adaptability whether you require buckets or trenchers, levellers or forks, the dingo can be easily adapted.
patented cast steel chassis k9-4 remote controlled unique cast steel chassis is not only the strongest in its class, but the innovative design allows a huge 27hp engine to be fitted into an envelope small enough to get to the most confined work sites.
970mm - 790mm machine width when fitted with a narrow access kit the k9-4 remote controlled measures just 790mm wide, making it one of the few mini diggers on the market that can fit through a standard doorway.
1.835m lift height the k9-4 remote controlled has an impressive lift height that will allow you to load most small trucks.
325kg swl the k9-4 remote controlled safe working load of 325kg allows it to carry the full range of industrial attachments. (swl is rated at 50% of what the machine is capable of lifting).
awd system dingo's all wheel drive system means power to each wheel and no drive chain maintenance.
marine grade aluminium body panels rust resistant, can take plenty of punishment and still protect your valuable investment. The panels can be removed easily giving you full access to the engine and hydraulics systems, making servicing a breeze.
2 pump hydraulic system a standard feature on all dingos is the unique "tandem pump" hydraulic system which improves oil efficiency, directs the flow and power to where they are needed most, and prolongs duty cycle, enabling the dingo to work for extended periods.
3400psi hydraulic relief pressure the k9-4 remote controlled industry leading hydraulic relief pressure means that no other mini digger can drive attachments with the same power.
2 hydraulic outlets this standard feature means the k9-4 remote controlled can power many attachments including stump grinders, block splitters etc.
teflon bushes the k9-4 remote controlled encompasses teflon bushes in the joints for a low maintenance, no mess joint.
27hp diesel engine the k9-4 remote controlled comes standard fitted with the latest tier 3 low emission diesel engine.
serviceable hydraulic tank access to the hydraulic tank on all dingo models, allows the hydraulic system to be thoroughly cleaned in the manufacture process, and ease of accessibility to the internal systems.
View Complete Details

Sheet Metal Components

We offer wide range of sheet metal components.
We offer wide range of cnc sheet metal components.
All types of sheet metal fabrication.
Product development for sheet metal products.
View Complete Details

Digging Services

We undertake hole digging jobs for tree plantation projects.width options 150 mm to 600 mmdepth: 0 to 1200 mm
time per hole: approx 1.5 minutesholes per day approx 500 depending upon soil type and hole size
machine available for rent and sale.
View Complete Details

Tree Plantation Machine

We are offering tree plantation machine.
we undertake hole digging jobs for tree plantation projects.width options 150 mm to 600 mmdepth: 0 to 1200 mm
time per hole: approx 1.5 minutesholes per day approx 500 depending upon soil type and hole size
machine available for rent and sale.
View Complete Details

Dingo Mini Digger

We are offering dingo mini digger.
As with all dingo models, the k9-2 is covered by an industry leading warranty, coupled with
quality trained service technicians to ensure that your machine will keep you working.
Its no wonder that dingo is the world renowned no. 1 choice in mini diggers.
The dingos robust structure, narrow frame, adaptability and maneuverability are
all unique features which give this machine the ability to go where no machine has
gone before.dingos reputation for excellence has made it the recognized name for mini diggers.
Standard features
2 pump hydraulic system
auxiliary hydraulic outlet
awd system
hard wearing durable powder
coat finish
hard wearing dingo tyres
datadot theft prevention system
quick hitch system
easy soft touch operator controls
safety features
solid operating platform
machine stability
safety hydraulic relief valve
concealed and protected rupture
resistant plastic fuel tank
low engine noise
balanced lifting and tie down points
engine shut-off roll over protection
(mercury switch) *optional feature
optional features to customise your machine
reverse buzzer
rotating beaco
traction options for all conditions
including narrow wheels or solid.
K9-2
engine
make vanguard (petrol)
power 16hp / 11.8kw
performance
hydraulic pumps 2 pumps
pump sizes 8 & 1.5 cc
relief pressure (drive) 193 bar (2800psi)
relief pressure (aux) 206 bar (3000psi)
hydraulic pump output 34 l/min
travel speed (with overdrive 0-7.8 km/h
rate lift capacity swl: 125 kg
mwl: 250 kg
wheel motors 4 x 33cu in
auxiliary hydraulic outlets
dimensions
a. Overall width 780mm
b. Overall length 1400mm
c. Overall height 1200mm
d. Maximum operating height with 4 in 1 bucket 1902mm
e. Turning radius with 4 in 1 bucket 1160mm
f. Angle of departure 27
g. Wheel base 650mm
h. Ground clearance 150mm
i. Dump height std bucket 840mm
j. Dump height with 4 in 1 bucket 1220mm
k. Reach fully raised 4 in 1 bucket 880mm
l. Height to hinge pin 1350mm
m. Machine width with 4 in 1 bucket 780mm
hydraulic reservoir 34 l
machine mass 540kg (approx)
View Complete Details

Mini Excavator

We are offerong mini excavator, mini trencher & mini skid steer on hire. As with all dingo models, the k9-2 is covered by an industry leading warranty, coupled with
quality trained service technicians to ensure that your machine will keep you working.
its no wonder that dingo is the world renowned no. 1 choice in mini diggers.
the dingos robust structure, narrow frame, adaptability and maneuverability are
all unique features which give this machine the ability to go where no machine has
gone before.dingos reputation for excellence has made it the recognized name for mini diggers.
standard features
2 pump hydraulic system
auxiliary hydraulic outlet
awd system
hard wearing durable powder
coat finish
hard wearing dingo tyres
datadot theft prevention system
quick hitch system
easy soft touch operator controls
safety features
solid operating platform
machine stability
safety hydraulic relief valve
concealed and protected rupture
resistant plastic fuel tank
low engine noise
balanced lifting and tie down points
engine shut-off roll over protection
(mercury switch) *optional feature
optional features to customise your machine
reverse buzzer
rotating beaco
traction options for all conditions
including narrow wheels or solid.
k9-2
engine
make vanguard (petrol)
power 16hp / 11.8kw
performance
hydraulic pumps 2 pumps
pump sizes 8 & 1.5 cc
relief pressure (drive) 193 bar (2800psi)
relief pressure (aux) 206 bar (3000psi)
hydraulic pump output 34 l/min
travel speed (with overdrive 0-7.8 km/h
rate lift capacity swl: 125 kg
mwl: 250 kg
wheel motors 4 x 33cu in
auxiliary hydraulic outlets
dimensions
a. Overall width 780mm
b. Overall length 1400mm
c. Overall height 1200mm
d. Maximum operating height with 4 in 1 bucket 1902mm
e. Turning radius with 4 in 1 bucket 1160mm
f. Angle of departure 27
g. Wheel base 650mm
h. Ground clearance 150mm
i. Dump height std bucket 840mm
j. Dump height with 4 in 1 bucket 1220mm
k. Reach fully raised 4 in 1 bucket 880mm
l. Height to hinge pin 1350mm
m. Machine width with 4 in 1 bucket 780mm
hydraulic reservoir 34 l
machine mass 540kg (approx).
View Complete Details

Mini Excavator Rental Services, Mini Trencher Rental Services

As with all dingo models, the k9-2 is covered by an industry leading warranty, coupled with
quality trained service technicians to ensure that your machine will keep you working.
its no wonder that dingo is the world renowned no. 1 choice in mini diggers.
the dingos robust structure, narrow frame, adaptability and maneuverability are
all unique features which give this machine the ability to go where no machine has
gone before.dingos reputation for excellence has made it the recognized name for mini diggers.
standard features
2 pump hydraulic system
auxiliary hydraulic outlet
awd system
hard wearing durable powder
coat finish
hard wearing dingo tyres
datadot theft prevention system
quick hitch system
easy soft touch operator controls
safety features
solid operating platform
machine stability
safety hydraulic relief valve
concealed and protected rupture
resistant plastic fuel tank
low engine noise
balanced lifting and tie down points
engine shut-off roll over protection
(mercury switch) *optional feature
optional features to customise your machine
reverse buzzer
rotating beaco
traction options for all conditions
including narrow wheels or solid.
k9-2
engine
make vanguard (petrol)
power 16hp / 11.8kw
performance
hydraulic pumps 2 pumps
pump sizes 8 & 1.5 cc
relief pressure (drive) 193 bar (2800psi)
relief pressure (aux) 206 bar (3000psi)
hydraulic pump output 34 l/min
travel speed (with overdrive 0-7.8 km/h
rate lift capacity swl: 125 kg
mwl: 250 kg
wheel motors 4 x 33cu in
auxiliary hydraulic outlets
dimensions
a. Overall width 780mm
b. Overall length 1400mm
c. Overall height 1200mm
d. Maximum operating height with 4 in 1 bucket 1902mm
e. Turning radius with 4 in 1 bucket 1160mm
f. Angle of departure 27
g. Wheel base 650mm
h. Ground clearance 150mm
i. Dump height std bucket 840mm
j. Dump height with 4 in 1 bucket 1220mm
k. Reach fully raised 4 in 1 bucket 880mm
l. Height to hinge pin 1350mm
m. Machine width with 4 in 1 bucket 780mm
hydraulic reservoir 34 l
machine mass 540kg (approx)
View Complete Details

Combine Holding Plate

We are offering combine holding plate.
clients can avail from us a high quality range of combine holding plate. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine holding plate is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Forklift Rocker Arm

We are offering forklift rocker arm.
clients can avail from us a high quality range of fork lift rocker arm. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Fork lift rocker arm is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Frame Assembly

We are offering frame assembly left and right.
Clients can avail from us a high quality range of combine frame assembly . Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine frame assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Structural Fabrication

We are offering structural fabrication.
Clients can avail from us a high quality range of track combine frame assembly. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Track combine frame assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Dingo Equipment

We are offering dingo equipment.
The ever popular dingo k9-3 has evolved again with some great new features. Improvement in engine and hydraulic technologies combine with dingo innovation to form the allnew 4 wheel motor awd. Increase in hydraulic flow andpressures enable greater ground speed, giving more power, result - the new awd works harder and faster. The k9-3 awd operates an extensive range of specialized dingo attachments. For more information on the available attachments, please see our attachments brochure or visitwww. Dingo. Com. Aufeatures & benefits of the k9-3 awdadaptabilitythe dingo has a unique ability to be adapted to suite your individual needs. Whether you require wheels or tracks, buckets or trenchers, in a minimal amount of time the dingocan be transformed easily to suit the job that its required for. 4 wheel motors dingo equipment australia pioneered the technology that lead to the production of the first ever mini digger with 4 motors and no mechanical chain drive system. The latest edition to the dingo pack, the k9-3 awd also features full hydraulic drive to each wheel, easy access to the wheel motors, and no maintenance or adjustment to drive chains. Increased hydraulic flow & pressure (diesel models)with the new generation of perkins and cat enhanced technology tier 3 diesel engines, the k9-3 awd is notable to deliver more hydraulic flow than ever before. This means greater ground speed and more efficient attachment operation. Safety hydraulic relief valves compensates for the greater pressure, and preventsunsafe overloading of the system. As with all dingo models, the k9-3 awd(all wheel drive) is covered by an industryleading warranty, coupled with quality trained service technicians to ensure that your machine will keep you working. Its no wonder that dingo is the world renowned no. 1 choice in mini diggers. The dingos robust structure, narrow frame, adaptability and manoeuvrability are all unique features which give this machine the ability to go where no machine hasgone before. Dingos reputation for excellence has made it the recognized name for mini diggers. Ask for the machine that your customers will ask for by name.
sealed roller bearingsthe k9-3 awd encompasses sealed roller bearings and teflonbushes in the joints for a low maintenance, no mess joint. No mess, no fuss equals lower ownership cost. Serviceable hydraulic tankaccess to the hydraulic tank on all dingo models, allows thehydraulic system to be thoroughly cleaned in the manufactureprocess, and ease of accessibility to the internal systems. 2 lift ramsensuring stable lifting, with no excess pressure on the chassisor arms. Datadot theft prevention systemtiny dots laser-etched with a unique number which issprayed onto the dingo. The random number is trackedon the data dot system.
enginemake vanguard (petrol) perkins (diesel)catpower 23hp 20hp / 15kwperformancehydraulic pumps 2 pumpspump sizes 9 & 3 cc 11 & 3 ccrelief pressure (drive) 220 bar (3200psi)relief pressure (aux) 206 bar (3000psi)hydraulic pump output 43 l/min 47 l/mintravel speed (with overdrive) 0-8. 8 km/h 0-9. 5 km/hrate lift capacity swl: 250 kgmwl: 500 kgwheel motors 4 x 29 cu inauxiliary hydraulic outlets 1dimensionsa. Overall width 880mm - 1050mmb. Overall length 1565mmc. Overall height 1200mmd. Maximum operatingheight with 4 in 1 bucket 2080mme. Turning radius with4 in 1 bucket 1300mmf. Angle of departure 20g. Wheel base 710-800mmh. Ground clearance 135mm - 175mmi. Dump height std bucket 1240mmj. Dump height with4 in 1 bucket 1750mmk. Reach fully raised4 in 1 bucket 600mml. Height to hinge pin 1680mmm. Machine width with4 in 1 bucket 1050mmhydraulic reservoir 60lmachine mass 745kg (approx) 825kg (approx)warrantyengine warranty 2 years 3 years/1000hrs*product warranty 3 years / 1000hrs*.
View Complete Details

Hole Digging Services For Greenhouse

We provide hole digging services for greenhouse.
overview
the dingo post hole digger can dig holes up to a 750mm diameter and a depth of at least 1.5 metres, up to 2.3 with an extension. Power is transferred to the augers by the post hole digger drive head. With the correct digging teeth fitted, the dingo can be used to dig through concrete, reinforced road base and bitumen. Anti swing system - fitted with an anti swing system improving safety by reducing the potential for the auger to swing back and forth when travelling. Auger mate - a lifter for loading or unloading augers from dingo trailers.
specifications
digging depth: augers 300mm and over diameter - 1.5m; augers under 300mm - 1.1m + extensions
cut width: 400mm
teeth types: earth, tungsten, rock.
flow: 32 l/min
pressure: 206bar (3000psi)
torque: 1800nm
speed: 90rpm
approx weight: phd drive head = 64kg augers: 12 - 58kg
used for: digging post holes in soil, clay, sand, rock/shale.
used by: contractors, landscapers, and hire companies.
used with: cement mixer, post hole mate, auger mate,
and auger extensions.
View Complete Details

Hole Digging For Greenhouse

OVERVIEW
The Dingo Post Hole Digger can dig holes up to a 750mm diameter and a depth of at least 1.5 metres, up to 2.3 with an extension. Power is transferred to the augers by the Post Hole Digger drive head. With the correct digging teeth fitted, the Dingo can be used to dig through concrete, reinforced road base and bitumen. Anti Swing System - Fitted with an Anti Swing System improving safety by reducing the potential for the auger to swing back and forth when travelling. Auger Mate - A Lifter for loading or unloading augers from Dingo trailers.
SPECIFICATIONS
Digging Depth: Augers 300mm and over diameter - 1.5m; Augers under 300mm - 1.1m + extensions
Cut Width: 400mm
Teeth Types: Earth, Tungsten, Rock.
Flow: 32 l/min
Pressure: 206Bar (3000psi)
Torque: 1800Nm
Speed: 90RPM
Approx Weight: PHD Drive Head = 64kg Augers: 12 - 58kg
Used For: Digging post holes in soil, clay, sand, rock/shale.
Used By: Contractors, Landscapers, and Hire Companies.
Used With: Cement Mixer, Post Hole Mate, Auger Mate,
and Auger Extensions.
View Complete Details

Cement Mixer For Greenhouse

We are offering cement mixer for greenhouse.
Overview
the dingo cement mixer fits onto the dingo post hole digger which drives the augers. To keep the mixer pointing upwards, the swing movement of the post hole digger is pinned in an upwards facing position. The dingo cement mixer is a mobile cement mixer with forward and reverse bowl motion. The design allows the mixer to reverse similar to a ready mix truck.
Specifications
capacity: 0.1cu.mdrum speed: 20rpm (recommended)rotation: bi-rotationallength: 60mmwidth (diameter): 630mmapprox weight: 32kgused for: mixing cement, stock feeds and stabilised sand.used by: fencing contractors, builders, pool builders, landscapers, paving contractors, playground installers and national parks.
View Complete Details

Channel Assembly

We are offering channel assembly.
clients can avail from us a high quality range of combine channel assembly. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine channel assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Tractor Parts, Combine Parts

We are offering tractor parts, combine parts.
clients can avail from us a high quality range of combine frame assembly. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine frame assembly is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Bus Body Parts

We are offering bus body parts.
Clients can avail from us a high quality range of bus handle base. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Bus handle base is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Combine Connecting Bar End

We are offering combine connecting bar end.
clients can avail from us a high quality range of combine connecting bar end. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine connecting bar end is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Combine Gear Box

We are offering combine gear box.
clients can avail from us a high quality range of combine gear box mtg bkt. Our professionals manufacture this part by making use of certified quality raw material with the help of state-of-the-art technology. Combine gear box mtg bkt is offered in a variety of specifications as per the precise needs of the clients. This product is highly appreciated for dimensional accuracy, optimum performance, corrosion resistance and longer service life.
View Complete Details

Trencher For Railway Line

OVERVIEW
The Dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The Dingo Trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
SPECIFICATIONS
Digging Depth: 900mm
Cut Width: 100, 150, 200, 250, and 300mm
Teeth Types: Cup or Diggatac
Features: Manual side shift, 42mm chain (frost), 300mm diameter single removable auger
Flow Range: 40-47l/Min
Frame Width: 1010mm
Side Shift Travel: 485mm
Min Side Clearance: 210mm
Total Dig Depth 1016mm
Used For: Digging trenches in soil, clay, sand,
rock and shale
Used By: Contractors, Plumbers, Landscapers, Electricians and Hire Companies
Goes with: Crumber Bar, Adapter Kits, Blade,
Turf Cutter and Under Road Borer.
View Complete Details

Trencher Work For Telecom

We are offering trencher work for telecom.
overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Agricultural Trencher

We are offering agricultural trencher.
Overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
Specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Lt Cable Laying Machine On Hire

We are offering lt cable laying machine on hire.
We give trenching and hole diggers on hire as well as sale. 500 holes per day trenching
max 10 inch width
1. 1 meter depth
min 4 inch x required depth upto 1. 1 meter.
View Complete Details

Trenching Services For Telecom

We provide trenching services for telecom.
Overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Trenching Services For Agriculture

We provide trenching services for agriculture.
Overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Cable Laying Machine

We are offering cable laying machine.
we give trenching and hole diggers on hire as well as sale.500 holes per day trenching
max 10 inch width
1.1 meter depth
min 4 inch x required depth upto 1.1 meter.
View Complete Details

Trenchers

  • Country of Origin India
  • Type Trench Digger Machine

We are offering trencher. Overview the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability. Specifications digging depth: 900mm cut width: 100, 150, 200, 250, and 300mm teeth types: cup or diggatac features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger flow range: 40-47l/min frame width: 1010mm side shift travel: 485mm min side clearance: 210mm total dig depth 1016mm used for: digging trenches in soil, clay, sand, rock and shale used by: contractors, plumbers, landscapers, electricians and hire companies goes with: crumber bar, adapter kits, blade, turf cutter and under road borer.

View Complete Details

Trenching Services

We provide trenching services.
overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Trenching Services In Rural Areas

Product specification
overview
the dingo trenching system easily outperforms all pedestrian trenchers. Its hydraulic system ensures power is transferred to the digging chain. Combine this with the correct number of cutting teeth and the correct chain speed, and you will have the best possible cut. The dingo trencher gives the operator the ability to see what they are doing at all times, enabling visibility and manoeuvrability.
specifications
digging depth: 900mm
cut width: 100, 150, 200, 250, and 300mm
teeth types: cup or diggatac
features: manual side shift, 42mm chain (frost), 300mm diameter single removable auger
flow range: 40-47l/min
frame width: 1010mm
side shift travel: 485mm
min side clearance: 210mm
total dig depth 1016mm
used for: digging trenches in soil, clay, sand,
rock and shale
used by: contractors, plumbers, landscapers, electricians and hire companies
goes with: crumber bar, adapter kits, blade,
turf cutter and under road borer.
View Complete Details

Cnc Plasma Profile Cutting Machine

We offer cnc plasma profile cutting (up to 1mm to 35mm) on hyper therm hpr130xd with true hole technology. Ms plasma cutting ss plasma cutting aluminum plasma cutting.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Himanshu Sachdeva (Techno Industrial Corporation)
  • Alpha Drug Road, Village Samalheri, Ambala Chandigarh Highway, Lalru, Mohali, Punjab - 140501, India
  • Share us via