Other Products / Services #333902

We offer sturdy, reliable and durable oil burner which is highly efficient in its working. There are various types of air burners such as waste oil burner, air pressure oil burner etc. Our burners are available in a variety of designs and therefore it can burn different varieties of oils such as light diesel oil, furnace oil, c.t.f etc. These find usage in various applications such as: oil fired furnaces for glass, bricks and ceramics. Bakery ovenskilns and galvanizing equipments. Varnish potstea driers etc.

We are offering lead acid battery recycling plant. our lead acid battery recycling plants are operating in more than 5 states in india. They have required clearances from cpcb moef lead dust is captured in settling chamber cyclonic dust collector automatic pulse type dust collector wet scrubber before being discharged in to atmosphere via blower & chimney.

we are offering Lead Ball Casting Machine.Molten metal lead pours from one side on machine. by the time the molten metal takes one round, it has solidified to ball form available in 400 Kg Hr , 1000 Kg Hr , 2000 kg hr & 2500 Kg Hr capacities.

We are offering air preheater is basically heat transfer equipment to heat air before another process. These types of air-pre-heaters find application in papers mills, sugar mills and in power plants. The primary objective of using an air preheater is to increase the thermal efficiency of the process. One of the purposes of the air pre heater is to recover the heat from the boilerfurnace flue gas, which increases the thermal efficiency of the boilerfurnace by reducing the useful heat lost in the flue gas. fresh air enters from topside vertically on one end & passes down through a number of tubes. It collects at the bottom in a chamber from where it again rises up vertically before exiting the preheater. The numbers of tubes are used to increase the surface area of contact between flue gases & fresh air & to enable better & more even heat transfer. As a consequence, the flue gases are also sent to the flue gas stack (or chimney) at a lower temperature, allowing simplified design of the ducting and the flue gas stack. Most of the industries allow flue gases to escape at a temperature of 600-900 deg. C allowing significant percentage of fuel between 35-50% input as wastage to the atmosphere. Preheating of combustion air is the most commonly used method of waste heat recovery in almost all types of furnaces. Care has to be taken that the preheated air ranges between 250-500 deg. C depending on what the burners can withstand. The l.a.p. Type burners fitted on most of the furnaces have a limitation of preheated air temperature of 250 deg. C. We are also one of the well known manufacturers of air preheater.

PHF unit filters, heats & pumps furnace oil to oil fired furnaces, kilns, ovens, dryers, boilers at 15-20 psi at 100 Deg C.The furnace oil is filtered through coarse inlet basket strainer, Heated to desired temperature & filtered again through fine outlet basket strainer before being pumped to be fired in boiler furnaces.Use of fuel oil handling system minimizes start up and operating difficulties in boiers & furnaces and also reduce maintenance costs.Duplex unit consists of 2 nos inlet filters in parallel , followed by 2 nos. gear pumps, One heater unit followed by outlet filters.Any excess fuel, which is not required by the burner, is returned back to the heating and pumping unit.

We are offering lap oil burner. Lap oil burners used for furnace oil ldo firing available in size 00 , 0 , 1 , 2 & 4 used in tire recycling plant, rotary furnaces for sand drying copper scrap melting lead battery plate melting furnace rolling mills pipe galvanising industry etc.

We are offering ribbon blender is used for uniform mixing of dry powders, granules etc. In ribbon blender, shaft is welded with two sets of spiral ribbons, one inside the other. Inner and outer helical ribbons are accurately proportioned and oppositely pitched to prevent localized material accumulation. We offer various types of ribbon blenders such as stainless steel ribbon blender, pressure ribbon blender, double spiral ribbon blender etc. We are also one of the well known manufacturers of ribbon blender in india. Some of the features of ribbon blender we provide are: all contact parts made in ss, top cover also made from ss.Heavy & enlarged base stand assembly on a ms structure.outboard bearings in rugged cast steel housingdesigning of ribbons is done in such a way that it imparts both radial and linear motion for complete homogeneous mixing of material.Shaft sealing on out side with teflon bush and ss stuffing box.These ribbon blenders are extremely useful in chemical industries, ayurvedic formulation pharmaceutical industries, pesticides and fertilizer and food processing industries and other industries.These are manufactured in a range of 25 kg to 1000 kg batch capacity in s.s.

We are main supplier of this product.