Udey Wires & Cables Mumbai, Maharashtra

We offer ptfe insulated cables. Technical data* special ptfe multicore cables with high temperature resistance & performance max. Temperature +300 c short time nominal voltage ‘e’, uou 450600v withstand test voltage (stationery) 2000v ac (core to core) for 1 min insulation resistance min. 1gohmkm op. Temperature -190 to 260 c applications features ‘rohs’ complaint, cadimum free low dielectric loss high insulation resistance absolute weather resistance absolute corona ozone resistant non - flamable micro-culture resistant does not permit fungus-formation ptfe cables have outstanding mechanical & physical properties and are therefore used in various industrial applications, mainly where high chemical is displaced in combination with high temperatures. Ptfe jacket prevents successfully formation of stress cracks, which appear often at extreme ambient temperature changes. Ptfe cables are recommended for use in automotive, steel industries, aviation, shipping as well as cement, glass and ceramic factories. Min. Bending radius 10 x cable f temperature limit at the conductor silver pl. Copper: +200 c nickel pl. Copper: +300 c c * above details are based on characteristic data of material used and our own laboratory tests. Harmonized code cable structure conductor silver nickel bare plated stranded copper nickel conductors outer jacket of ptfe tape fused color grey black white tolerance on od + 0, 15 mm ptfe tape insulated & fused cores core identification by color code cores stranded in layers with optimal lay-length cables meant for fixed static installation only in open or ventilated systems. Otherwise the properties of ptfe are reduced at temperatures exceeding 150 c. above detailsd are based on characteristic data of material used and our own laboratory tests. This document is an exclusive ‘udey wires & cables’ property. Current laws defend this property and forbid it’s improper use.

We offer instrumentation cables. Technical data* confirming to bs 5308 (part2) heat resistance pvc insulation op. Temperature -5°c to +85°c operating voltage 500v withstand test voltage (stationery) 1000v ac (core to core) for 1 min 1000v ac (core to screen) cable structure min. Bending radius 12 x cable f conductor bare stranded copper fine, to bs6360 class2, as per table 1 of bs5308 ti-1 70°cti-2-hr 85°c pvc insulated cores core identification by numbers on white core cores stranded in layers with optimalouter sheath of pvc black blue, fr 85°c frls zhls pvc oil resistant & adhesion-free screen of aluminum pet tape over 7 stranded tinned copper wire 0.50mm² applications these are safe signal transmission cables with signal protection through 20% overlap high coverage aluminum pet tape with metal in continuous contact with 7 stranded tinned copper wire of 0.50mm². It is used in all types of signal transmission connections where the voltage induced by an exterior electromagnetic field may affect the signal transmitted. Its most common applications are control circuits, electronic equipment connections, computer systems electrical properties @ 20°c conductor (7 strands) nom sq.mm 0.50 0.75 1.0 1.50 conductor resistance max ? km 39.7 26.5 18.4 12.30 insulation resistance @ 500vdc min m? km 25 operating voltage urms volts 500 capacitance@ 1khz max pfkm 250 250 250 250 l r ratio max μhkm 25 25 40 40 this document is an exclusive ‘udey wires & cables’ property. Current laws defend this property and forbid it’s improper use . * above details are based on characteristic data of material used and our own laboratory tests.

We are offering an extensive assortment of High Voltage Leads . The High Voltage Leads offered by us are the flexible wires that are insulated with very high dielectric strength materials. These High Voltage Leads are designed for use as high voltage output leads for test and measure applications. 'udeyvolt' leads are shielded with annealed copper braids to be connected to 'earth' for operator and instrument safety. Further, these High Voltage Leads are highly flexible and compact. Also, these High Voltage Leads can be stripped with conventional tools and withstand test certificate with traceability.   Features : Wide h. V. Rating : 30 / 50 / 100 kv ac. Flexible copper conductor. Poly fluro based insulation, no asbestos. Special rubber oil resistance flexible outer sheath. Dielectric strength higher than specified voltage use. Special copper shields for grounding. Small standard lengths of 5 / 10 / 15 meters. Highly flexible, compact and can be stripped with conventional tools. H. V. Withstand test certificate with traceability.   Details : Conductor : silver plated stranded annealed copper wire. Current capacity : 1. 5 amps max. Rating : 30 / 50 / 100* kilovolts ac.

We offer anti radiation cables. Technical data* polyetheretherketone (peek) wires insulated with unfilled semi-crystalline polymer films for high temperature resistance & demanding applications nominal voltage uou 300500v test voltage 6000v op. Temperature -60° to 260°c max. Temperature +300°c short time insulation resistance 4.1 x10^16 ùcm min. Bending radius 7x cable diatensile strength @ break 120mpa(23°c) elongation @ break >150%(23°c)tear strength >150%(23°c)tolerance on od + 0, 10 mm 2.5mm²applications ‘udeywirecab’ peek insulated wires are special cores for use in very high temperature areas coupled with requirement of high radiation resistace, mainly in medical industry, aviation, shipping & nuclear technologiespeek is high performance semi-crystalline thermoplastic is very tough and isof withstanding high temperatures along with exceptional resistance to uv & energy radiation (gamma & x-ray)peek wires can be easily strengthened withptfe fillers alongelectrical properties-solid insulation copper conductor dimensions high temperature resistant to good resistance to hydrolsis high abrasion resistace radiation over 1000mrad execellent resistance to uv & high energy radiation (gamma & x-ray) conductor + 0, 16 mm > 2.5mm² (apx.) (n°x ømm) (mm) (mm) (mm) (ohmkm) amperey(mm²) conductor insulator (tape wrapped & fused) solid peek tensile strength @ break 120mpa(23°c) elongation @ break >150%(23°c) tear strength >150%(23°c) low thermal expansion coefficient high thermal load carrying capacity high creep resistance low flammability & low smoke secretion during combustion. 20 7 x 0, 32 1, 00 0, 20 1, 40 34, 30 11 0, 60 6 1 x 3, 86 3, 86 0, 20 4, 30 1, 10 90 11, 70 20 1 x 0, 81 0, 81 0, 20 1, 20 35, 00 11 0, 50 (i) max upto 150°c awg no. Resistance diameter max@20°c insulation thickness outer cable ø cross composition section 18 1 x 0, 96 0, 96 0, 20 1, 40 23, 10 15 0, 75 18 7 x 0, 40 1, 20 0, 20 1, 60 24, 00 16 0, 90 16 1 x 1, 29 1, 29 0, 20 1, 70 14, 00 20 1, 30 16 19 x 0, 29 1, 45 0, 20 1, 85 16, 20 19 1, 25 15 1 x 1, 38 1, 38 0, 20 1, 80 12, 00 23 1, 50 15 19 x 0, 32 1, 60 0, 20 2, 00 11, 01 25 1, 50 14 1 x 1, 63 1, 63 0, 20 2, 10 9, 90 28 2, 00 13 1 x 1, 83 1, 83 0, 20 2, 30 7, 41 33 2, 50 12 1 x 2, 04 2, 04 0, 20 2, 45 5, 10 40 3, 30 10 1 x 2, 56 2, 56 0, 20 3, 00 3, 90 51 5, 00 y single core cables upto ambient temp. Of 150°c, installed in open air with a space of min. 1x diameter to wall. *above details are based on characteristic data of material used as per raw material mfr. Specification this document is an exclusive ‘udey wires & cables’ property. Current laws defend this property and forbid it’s improper use .

The PTFE Nickel Plated Copper Wire offered by us has excellent r.f. and high voltage properties combined with small size due to low wall thickness, superb thermal resistance & freedom from ageing, fungus & water absorption, which make it the most preferred insulation over other conventional material. Further, the PTFE Nickel Plated Copper Wire we supply has outstanding mechanical & physical properties and is therefore used in various industrial applications, mainly where high chemical is displaced in combination with high temperatures. Ptfe jacket prevents the formation of stress cracks, which appear often at extreme ambient temperature changes. These PTFE Nickel Plated Copper Wires are recommended for use in automotive, steel industries, aviation, shipping as well as cement, glass and ceramic factories.   Features : Operating temperature (continuous) : -65 o C to 260 o C Max. temperature (intermittent) : 290 o Dielectric strength (Brkdn) : 24 kV/mm Elongation strength : 350% Tensile strength : 250 kg/cm 2