Welcome to Vishwakarma Coaters
Powder coating is by far the youngest of the surface finishing techniques in common use today. It was first used in Australia about 1967. Powder coating is the technique of applying dry paint to a part. The final cured coating is the same as a 2-pack wet paint. In normal wet painting such as house paints, the solids are in suspension in a liquid carrier, which must evaporate before the solid paint coating is produced. In powder coating, the powdered paint may be applied by either of two techniques. The item is lowered into a fluidized bed of the powder, which may or may not be electrostatically charged, or The powdered paint is electrostatically charged and sprayed onto the part. The part is then placed in an oven and the powder particles melt and coalesce to form a continuous film. There are two main types of powder available to the surface finisher: Thermoplastic powders that will remelt when heated, and Thermosetting powders that will not remelt upon reheating. During the curing process (in the oven) a chemical cross-linking reaction is triggered at the curing temperature and it is this chemical reaction which gives the powder coating many of its desirable properties.
-
CEO
Mr. Sobit Sharma
-
Year of Establishment
2015
-
Primary Business
Retailer
-
Annual Turnover
Below Rs. 0.5 Crore Approx.