Vohras International Delhi

We are offering thermal deburring machine. Thermal deburring machines are most suitable for internal deburring of components. Cross hole deburring can very easily be done in a split of a second. These are the latest deburring machines being offered by vohras international. Thermal deburring machines are available in various models as well sizes. Plz feel free to mail us your detailed querry with drawings, marking the critical areas to be deburred.

The dry ice blasting uses small pellets of dry ice sprayed through a jet nozzle with compressed air to remove paints, oil, grease, dirt, ink, adhesives and other materials you want to remove. The frigid temperature of the dry ice against the dirty surface causes adhesion to shrink and loosen from the surface. On immediate impact, the dry ice evaporates into environmentally safe and innocuous CO2 gas.

• Sizes150 KG, 300 KG, 500 KG, 900KG, 1000 KG

Portable sand blasting machines are used for cleaning and finishing of bigger components, big tanks, Structures. It is a dry process & can be used in the open, though it is more suitable in a closed chamber blast room, with lights, ventilation & dust collection system. The Blasting media is to be re loaded and it works by Air pressure through a Sand blasting nozzle, affixed in the Hose pipe. Various sizes are available such as 150 KG, 300 KG, 500 KG, 900KG, 1000 KG & more. The best possible advantage of this mode is that it can be taken to the site very easily.

We are offering dry ice blast cleaning machines. The dry ice blasting uses small pellets of dry ice sprayed through a jet nozzle with compressed air to remove paints, oil, grease, dirt, ink, adhesives and other materials you want to remove. The frigid temperature of the dry ice against the dirty surface causes adhesion to shrink and loosen from the surface. On immediate impact, the dry ice evaporates into environmentally safe and innocuous co2 gas.

we offer Vibratory Finishing Machines. Vibratory Finishing is quite different from hand polishing, buffing, filing, belting, ets. as you are not overly depended on the skill of the operator. Instead, it is a mass finishing process technique, lending itself to batch processing of components and uniformity for the entire lot. Parts are typically bulk loaded for a long batch process or continuously fed into a vibratory machine. Media of various compositions and sizes are used in the bowl alongwith different type of soap based chemicals compounds.

• Temperatures2500-3300°C

A precisely defined gas mixture is placed in the pressure chamber by means of a gas metering system and ignited. The subsequent combustion creates temperatures of 2500-3300°C, during which the burr to be removed reaches its ignition temperature and reacts with the excess oxygen in the pressure chamber. This leads to complete combustion of the burr within 20 ms. The TEM procedure offers the particular advantage of removing internal burrs (such as in holes) as well as burrs on external surfaces. The procedure can be applied to various materials like steel, cast-iron, aluminum, or even plastic.