Industrial Air Control System

Industrial Air Control System

Delhi, Delhi, India

high pressure micro-powder grinder


high pressure micro-powder grinder

YGM high pressure ultrafine grinder is also called ultrafine grinder, we learned experience and technology from Germany and Japan and solved many ultrafine powder classification difficulties, and EMCC finally developed YGM high pressure ultrafine grinder based on industrial grinder foundation.

Advantage High pressure spring Strong grinding force

Compared with YGM high pressure ultrafine grinder the grinding force of YGM high pressure ultrafine grinder’s roller to material is increased by 800-1200 kg under the function of high pressure spring.

Big input size High output fineness

Big input size average out put size could be 6.5um.

Energy-efficient

In the condition of same capacity and fineness energy consumption is 1/3 of jet mills.

Seal Grinding

Eclipsed form multiple seal grinding device with perfect seal.

Product introduction
  • Production capacity : 25-1000KG/H Notice: Mean value and the specific production capacity is subject to clients’ actual equipment configuration., 25-1000KG/H Notice: Mean value and the specific production capacity is subject to clients’ actual equipment configuration.
  • Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
  • Range of Application : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum grain slag ore slag coal dust bentonite barite marble talc refractory material.

YGM high pressure ultrafine grinder is also called ultrafine grinder, we learned experience and technology from Germany and Japan and solved many ultrafine powder classification difficulties, and EMCC finally developed YGM high pressure ultrafine grinder based on industrial grinder foundation. YGM high pressure ultrafine grinder is mainly applied in feldspar, talc, barite, marble, limestone, carbon black, argil over 500 kinds of material ultrafine powder process, final product size could be 500 mesh(25 micron)-2500 mesh(5 micron), finest size could be 3500 mesh(3.55 micron)

Working principle

After crushing process material will be taken to storage silo by elevator then vibrating feeder will bring material to machine grinding chamber then material will be scooped up to the gap between roller and grinding ring to be grinded blower makes air flow goes to grinding chamber powder will be taken to classifier to be classified coarse powder will fall and be reground standard fine powder will go to cyclone powder collector then discharged from discharge port. Material contains moisture water vapor would be generated when grinding some gas will be absorbed because the whole tube is not absolutely sealed and circular air volume would be increased in the system. To guarantee the grinding mill working in the negative pressure state extra air would goes into bag dust collector for purification.



Technical Parameters
model YGM7826 YGM8327 YGM9531
no.of roller(Pcs) 3 3 4
diameter of roller(mm) Ф260 Ф270 Ф310
inner diameter of grinding ring(mm) Ф780 Ф830 Ф950
Speed of Main Mill(r/min) 160 140 130
max input size(mm) <20 <20 <20
capacity(kg/h) 25-500 30-680 150-1000
motor model of main machine(kw) Y225M-8-18.5 Y225M-8-22 Y225S-4-37
motor model of blower(kw) Y160L-4-15 Y180M-4-18.5 Y200L-4-30
motor model of classifier(kw) Y160M-6-7.5 Y160M-6-7.5 YCT200-4A-7.5
Dimension (L×W×H)(m) 4.5 × 4.2 × 5.1 5.3 × 4.1 × 5.2 7.1 × 5.9 × 7.9
final product size(mm) 500 目 (0.025)—1250 目 (0.01) 最细 2500 目 (0.005)


Looking for high pressure micro-powder grinder?


Search


Contact Details

Mr. R. K. Roy

Khasra No. 125, Mukhmelpur, Delhi, Delhi - 110036, India

View Mobile No.