Industrial Air Control System

Industrial Air Control System

Delhi, Delhi, India

Micropowder Grinder


Micropowder Grinder

HGM Series of Three-rings and Medium-speed Micro-powder Grinder is absolute advanced leading machine in grinding mill industry.

Advantage Long Service Life

Service life could be 1 year. Service life is longer than wear-out part’s of impact crusher and turbine crusher if material and product size are same.

High Efficiency and Low Consumption

Under the condition of same material power and final product size its capacity is higher than jet mill and stirred mill by 40%.

Superfine Powder Process

Final size of the material processed by superfine mill could reach d97≤5μm.

Safety Operating

No antifriction bearing and bolt inside the grinding cavity no bearing or sealing element or bolt falling out and damaging machinery situation.

Product introduction
  • Processable Material : Limestone calcite fly ash calcium carbide kaolin calcium carbonate coal gangue gypsum slag ore slag coal dust bentonite barite marble talc refractory material.
  • Production capacity : 0.35-6T/H Notice: Mean value the specific production capacity is subject to clients’ actual equipment configuration.
  • Range of Application : Non flammable brittle material whose Moh's hardness is less than 6.
Working principle

HGM Series of Three-rings and Medium-speed Micro-powder Grinder Mill is also called superfine grinding mill, it’s a new type superfine powder process grinder designed by EMCC and based on many years’ grinding mill production experience, this new type grinding mill absorbed advanced machinery manufacturing technology from Sweden and it was made after 20 times tests. HGM Series of Three-rings and Medium-speed Micro-powder Grinder is absolute advanced leading machine in grinding mill industry. HGM Series of Three-rings and Medium-speed Micro-powder Grinder is widely used in making fine powder or ultra-fine powder, and the raw materials should be non-inflammable and non-explosive under the Moh’s hardness less than 6 grade such as limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore, etc. The lifetime of spare parts is relied on the hardness of raw materials, and is lowered once the Moh’s hardness is up to 4-6 grades.



Technical Parameters
Model average
working
diameter
(mm)
No. of Roller
and Ring
The
Feeding
Size
(mm)
Size of Finished
Product
Capacity
(t/h)
Motor Power(KW) Weight of
Main Milland
Classifier (t)
Dimension(m)
Roller
(Pcs)
Ring
(Pcs)
Micron Mesh Main
Mill
Classifier air
blower
Vibrating
Feeder
Discharge
Valve
HGM60 600 15 2 ≤10 5-47 325-2500 0.35-2.5 37 11 30 0.06 0.75 5.2 10×3×5.5
HGM80 800 21 2 ≤10 5-47 325-2500 0.6-4 75 22 45 0.06 0.75 7 11.9×2.7×5.8
HGM100 1000 21 2 ≤10 5-47 325-2500 0.9-6 132 37 75 0.15 1.1 9.5 15.5×4.5×8.6



















Looking for Micropowder Grinder?


Search


Contact Details

Mr. R. K. Roy

Khasra No. 125, Mukhmelpur, Delhi, Delhi - 110036, India

View Mobile No.