Post Buy Requirement
AH
Ahmedabad, Gujarat, India
Add Review

Other Products / Services #4139041

Automatic Four Head Liquid Bottle Filling Machine

AUTOMATIC LIQUID BOTTLE FILLING AND ROPP CAP SEALING MACHINE
MODEL: AHBF 4
Salient Features:
No Bottle - No Fill" system.
All contact parts made of SS316 material with Autoclaving/Sterilization/Cleaning.
FMachine construction in SS 304 material.
Diving Nozzle for Foam free filling.
With Fill Accuracy.
Automatic In-feed and Exit of Bottles.
Minimum Change Over time.
Digital counter.
Built-in A.C. Variable Frequency Drive System.
Process Operation:
Bottles are feed on to in-built Infeed turn table, from where it delivered to SS conveyor belt. Conveyor belt transport bottles to filling station. Filling station has mechanical bottle stopper for exact bottle neck centering of bottles during filling operation. Nozzle goes upwards slowly from the bottom level of bottle towards neck during filling to minimize forming adjustable nozzle is reciprocating according to filling dose. The dosing block with a hexagonal bolt, this means different fill size can be set easily within minimum use of time. After liquid filling bottles are delivered to capping/labeling machine conveyor for further operations.
View Complete Details

Optical Visual Ampoule Inspection Machine

OPTICAL VISUAL AMPOULE INSPECTION MACHINE
MODEL: AHIM 6
SALIENT FEATURES:
All contact parts in stainless steel.and approved engineering plastics.
Spinning of ampoule/vial.Magnifyed view with back lighting
Clear view of six ampoule/vial.
Modular and compact ejection system.
Rotation of spinners can be adjusted to give desired vortex on liquid
Easy access for cleaning and maintenance.
Large inspection to transport time ratio.
Facility of repeat cycle.
LED as well buzzer assisted safe rejection.
Counters for good and reject products.
OPERATION:
The filled ampoules are loaded in to the infeed chute/ hopper from where they are transferred in batches by an index wheel onto a linear transfer rack.
The rack transfers the ampoules onto the inspection station, where spinners spin the ampoules at a predetermined RPM so that a vortex is formed. Illumination from behind the ampoules assists in light refraction of particles/fibers .
An operator views six ampoules through a magnifying glass.
The ampoules are rejected by pressing rejection switches ergonomically located for operator convenience. A numbered light positioned just above the magnifying lens within the operator's field of vision lights up indicating a rejection In case a recheck is desired before checking the next lot, a facility for repeat cycle is provided.
The ampoules batch is then transferred onto the rejection station where the ampoules rejected at the inspection station are automatically ejected out. A numbered light lights up above the lens indicating a positive rejection taking place. In addition a rejection LED as well buzzer assists in tracking the actual rejects of objects.
The accepted ampoules are transferred onto the collection station where there are collected in a tray.
MACHINE IS SUPPORTED WITH DOUBLE BACKGROUND OPTION TO DETECT BLACK AS WELL WHITE PARTICALS

Electrical rating

Main machine : 0.75 hp, 1440 rpm

Spinning assembly : 0.25 hp, 1440 rpm

Power characteristic 220 volts, 1 phase,  
Finish/painted S. S. Finish
Overall dimensions 1600 mm (l) x   1100 mm (w) x 1600 mm (h)

Net weight

500 kgs.

Output(ampoules)

60-72/minute (depend on operator’s skill)

Output(vials)

48-56/minute (depend on operator’s skill)

Loading and unloading

As per your requirements

Input specifications:

Diameter min. 9mm to  15 mm

Height min. 60 mm to 116 mm

View Complete Details

Optical Visual Vial Inspection Machine

OPTICAL VISUAL VIALS INSPECTION MACHINE
MODEL: AHIM 3 & AHIM 4
SALIENT FEATURES:
All contact parts in stainless steel and approved engineering plastics.
Spinning of vial Magnified view with back lighting
Clear view of four vials.
Modular and compact ejection system.
Rotation of spinners can be adjusted to give desired vortex on liquid
Easy access for cleaning and maintenance.
Large inspection to transport time ratio.
Facility of repeat cycle.
LED as well buzzer assisted safe rejection.
Counters for good and reject products.
OPERATION:
The filled vials are loaded in to the infeed turntable from where they are transferred in batches by an index wheel onto a linear transfer rack.
The rack transfers the vials onto the inspection station, where spinners spin the vials at a predetermined RPM so that a vortex is formed. Illumination from behind the vials assists in light refraction of particles/fibers .
An operator views four vials through a magnifying glass.
The vials are rejected by pressing rejection switches ergonomically located for operator convenience. A numbered light positioned just above the magnifying lens within the operator's field of vision lights up indicating a rejection In case a recheck is desired before checking the next lot, a facility for repeat cycle is provided.
The vials batch is then transferred onto the rejection station where the vials rejected at the inspection station are automatically ejected out. A numbered light lights up above the lens indicating a positive rejection taking place. In addition a rejection LED as well buzzer assists in tracking the actual rejects of objects.
The accepted vials are transferred onto the collection station where there are collected in a tray.
MACHINE IS SUPPORTED WITH DOUBLE BACKGROUND OPTION TO DETECT BLACK AS WELL WHITE PARTICALS.

Electrical rating

Main machine : 0.75 hp, 1440 rpm

Spinning assembly : 0.25 hp, 1440 rpm

Power characteristic 220 volts, 1 phase,  
Finish/painted S. S. Finish
Overall dimensions 1600 mm (l) x   1100 mm (w) x 1600 mm (h)

Net weight

500 kgs.

Output(ampoules)

60-72/minute (depend on operator’s skill)

Output(vials)

48-56/minute (depend on operator’s skill)

Loading and unloading

As per your requirements

Input specifications:

2ml to 10ml vials can run in four head machine (four vials come in to inspection zone) and if to run 2ml to 30ml vials machine fitted with three heads (three vials come in to inspection zone)

View Complete Details

Semi Automatic Sticker Labeling Machine

Semi Automatic Sticker Labeling Machine
MODEL:AHL 150S
We offer a wide range of Automatic Slant Ampoule/Vial Sticker Labeling Machines that are fabricated using high quality components. These cater to the needs of various industries and are offered at industry prices. Further, these are available with optional accessories like printing devices. In addition, these are offered with the A.C. Drives for speed controls and no objects no label systems objects sensors and label sensors.
Mode Of Operation & Description:
The machine apply labels ampoules, vials and other cylindrical containers with diameter from 10mm minimum to 45mm maximum.
It uses sticker labels having width of 20mm minimum and a length of 40mm minimum to a width of 50mm maximum and length of 100mm maximum from the sticker roll.
The rated output is 150 containers per minute maximum. It is recommended to use labels of 60 to 65 gsm to achieve rated output. The mechanical machine speed is variable unto this rated output.
The Loading hopper releases containers into a roller conveyor in which each containers each held some distance by separators rollers and back up guide are passed to the labeling station in an upright position.
When the ampoules/vials reaches to the labeling station, the sensor operates the servo motor. At this point of time, the sticker touches the ampoules/vials and wrapped over the ampoules/vials by the driven belt on roller.
Then Rubber belts press the Labels on ampoules/vials during passing through Rubber belt.
The labeled ampoules/vials pushed to unloading tray.
Specifications:
Electrical Rating: 0.5 HP
Power Characteristic: 230 Volts, 1 phase
Finish/Painted: S.S. Finish
Dimensions: 1500 mm (L) x 600mm (W) x 1200mm (H)
Net Weight: 400 KGS.
Output/Hour: 6000 TO 9000 objects
Ampoules Size: 1ml to 10 ampoules
Vials Sizes: 2ml to 30 ml vials
E-catlogueCheap Michael Kors uk

View Complete Details

Automatic Ampoule Paper Rondo Tray Packing Machine

Automatic Ampoule Paper Rondo Tray Packing Machine
MODEL: AHRP 40C
SUITABLE FOR C & I TYPE PAPERS TRAYS PUTTING INTO OPERATION

Basic units consist of a rondo tray hopper, a denesting station, a product hopper, a rotary filling stations, an inserting wheel, and controls switches.

The machine should be used for Ampoules to be packed in rondo trays for which it has been fitted with.

The nested trays are placed directly in the rondo tray hopper in the same position as received from the suppliers. Filled and labeled ampoules are placed in the product hopper in vertical position.

Now, operate the machine for a short time, by pressing inching Push Button with a view to obtain uniform packing of ampoules in to rondo trays.

The dog chain moves out each pair of nested rondos and transfers them to the denesting station where they are separated and positioned face up.

The rotary transfer wheel picks up a preselected number of ampoules and drops them in the rondo flutes.

The ampoules next are firmly inserted in to the flute of the rondo by means of the inserting wheel. Direction Of The Operation Will Be Left To Right.

Machine occupies very little floor space as compare to hand packing.

Machine occupies very little floor space as compare to hand packing.

Very simple in operation. Size changes take less than fifteen minutes and require no special tools.

Machines efficiency allows short runs and frequent changes.

If ampoules placement found satisfactory, the machine is put into operation.

Now push green push button for continuous operations.

Size of Ampoules:
The machine used to pack Ampoules from 10mm to 17mmin diameter in to rondo trays in the horizontal position .

The height of the round Ampoules should be proportional to the diameter. In the event of unusual height, kindly get the Ampoules examined at our works before putting the machine into operation.

Size of rondo trays.

The machine is suitable for following dimensions of the rondo trays.

Change parts:
The machine is fitted with the change-parts suitable for any one size of Ampoules as per the order and samples tried out.
The machine can be pre-set for the different size of Ampoules and rondos trays with change-parts.
the changes in star wheel depends on change in ampoules diameters, changes in numbers of fills per rondo or changes in rondo dimensions.
Salient Feature:
Flap opening station, over printing device, flap closing station & gumming station
Airjet for flap opening
Online label applicator with online batch printing units for c types paper trays
No rondo no object
Ac drives
Digital counter

Technical Specification:
Output 40 Tray / Minitue
Power 415 Volts, 3Ph, 5 Wire
Electrical Rating 1 HP 1440 RPM
Finished/ Painted S.S. Finish
Overall Dimension (In mm) L 2800 x W 800 x H 1500
Net Weight 800kgs Approx.
Input Specification:
Container (Object) Diameter 10 to 17 mm
Container Height 50 to 80 mm
Rondo Length 220 mm
View Complete Details

Vial Sealing Machine

  • Electrical Rating 1 H.P.
  • Overall dimensions 1780 mm (L) x 1350 mm (W) x 1270 mm (H)
We are instrumental in offering automatic six head ampoule filling and sealing machine, model ahfs-6. These are highly appreciated by our clients for the sealing pre mechanism and for the feature of no ampoules no filling. We offer precision engineered automatic four head ampoule filling & sealing machine, model ahfs 4. automatic four head ampoule filling & sealing machines are manufactured using high quality components and are offered in customized solutions as per the needs of the clients. Further, automatic four head ampoule filling & sealing machine are available with a. C. Frequency drive that provides speed control for digital counter. In addition, we offer these with the pre sealing mechanism, which does not require ampoules or filling.
View Complete Details

Ampoule Inspection Machine

We are engaged in offering a wide range of Automatic AmpouleVial Inspection Machines. These are available with four tracks that are fabricated using nylon-6 rollers chain and are offered at competitive prices. Further, these are available with a spinning assembly that has A.C. Drives Rejection Units with 24V DC wiring. In addition, these can be availed with optional accessories like A.C. Frequency Drive for Speed Control Separate Machine that is required for ampoules and vials.
View Complete Details

Automatic Ampoule Loader Machine

AUTOMATIC AMPOULE LOADER MACHINE MODEL AHAL 432

Also Automatic Ampoule Loaders are available with automatic loading of ampoules in combi trays of multijet washing machines that save time. Further, these are precision engineered machines that are compatible with multijet washing machines and are offered at reasonable prices.

We offer our clients with a range of ampoules and vials Washing Machines that is manufactured using premium quality components. These are equipped with electrical controls that provide protection to the device against single phasing and motor overload. Further, these are appreciated by our clients for the features like long lasting and rust free finish. Our range of ampoules and vials Washing Machines includes multijet ampoules and vials washing machines.

Specifications:

Electrical Rating : 0.5 HP

Power Characteristic : 415 Volts, 3 Phase, 4 Wire system, 50 Cycles/Sec.

Finish/Painted : S.S. Finish / body Painted in Nickle-gray Colour

Overall dimensions : 890mm (L) x 1170mm (W) x 1270 mm (H)

Net Weight : 350 kgs. Approx.

Output/hour : 9000 Ampoules

Input Specifications:

Ampoules Size : 1ml to 5ml

Air : 5 cfm at 60 p.s.l.

Salient Features:

Time saving due automatic loading of ampoules in combi treys of multijet washing machines.

Tailor made machine is possible to make compatible with yours multijet washing machines.

View Complete Details

Automatic Linear Vial Washing Machine

AUTOMATIC LINEAR DOUBLE TRACKS VIAL WASHING MACHINE
MODEL : AHVW 120, AHVW 60
Operations:
The vial trays are directly un-loaded to the vial tray from which vials directly transfer to the turn-table.
The turn table slowly transfer vials to the linear washing machine in single track or two tracks feed warm, from where vials are automatically come in to invert position.
The synchronized star- wheel places two vials at a time in two tracks indexing chain or one vials in to the single track machine.
The indexing chain positively carries inverted pair of vials through seven sequential washes.
At the end of washing operation vials are re-inverted back into original and collected in the tray.
Pumping station:
Tank with valve 3 NOS.
SS 316 pump 3 NOS.
S.S. Filter housings and filter cartridges.
Change parts:
Change over of each vial size contain star wheels, worms, inverters./div>
Technical specifications:
SS finish gmp model
Dimension: 1600mm l >< 800mm w>< 800mm h
Electrical: single phase
Output: 3000- 4000 vials per hours in case single track machine
6000- 8000 vials per hours in case double track machine
View Complete Details

Inspection Table

Inspection table
MODEL: AHIM 3 & AHIM 4
Salient features:
Black and white board as per gmp norms .
Adjustable height of machines.
Number of persons sitting capacity (as per your requirements).
SS frame structures .
Moving conveyors belts.
Ac drives.
Gears motors.
Operation moving conveyors:
Inspection table is equipment consisting of three-track conveyor with dividing a hood and lighting arrangement with visual inspection background of alternate black and white color. Inspection table have stainless steel structure with moving pvc belts. Structure made out of S.S. Square pipe and supported on adjustable bolts.
The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts and further on the side tables for operator sitting on either side of the table. The operator sin turn pick up the bottles and visually inspect the bottles in the alternate white and black background to check for any particles in the liquid filled, sealed and breakage of bottle. After inspection the bottles are placed in the central track.
Technical specifications:
Number of operator as per end user requirements.
Number characteristics 0.5 hp / 220 volts / 50 hz.
Height of conveyor 860mm to 910mm as per end user requirements.
Machine dimensions 3000mm (l) x 700mm (w) x 1525mm (h).
net weight 200 kgs.
View Complete Details

Automatic Ampoule Plastic Rondo Tray Packing Machine

AUTOMATIC AMPOULE PLASTIC RONDO TRAYS PACKING
MODEL: AHRP 40U
Suitable for U type plastic trays

Basic units consist of a rondo tray hopper, a denesting station, a product hopper, a rotary filling stations, an inserting wheel, and controls switches.

The machine should be used for Ampoules to be packed in rondo trays for which it has been fitted with.

The nested trays are placed directly in the rondo tray hopper in the same position as received from the suppliers. Filled and labeled ampoules are placed in the product hopper in vertical position.

Now, operate the machine for a short time, by pressing inching Push Button with a view to obtain uniform packing of ampoules in to rondo trays.

The dog chain moves out each pair of nested rondos and transfers them to the denesting station where they are separated and positioned face up.

The rotary transfer wheel picks up a preselected number of ampoules and drops them in the rondo flutes.

The ampoules next are firmly inserted in to the flute of the rondo by means of the inserting wheel. Direction Of The Operation Will Be Left To Right.

Machine occupies very little floor space as compare to hand packing.

Machine occupies very little floor space as compare to hand packing.

Very simple in operation. Size changes take less than fifteen minutes and require no special tools.

Machines efficiency allows short runs and frequent changes.

If ampoules placement found satisfactory, the machine is put into operation.

Now push green push button for continuous operations.

Size of Ampoules:
The machine used to pack Ampoules from 10mm to 17mmin diameter in to rondo trays in the horizontal position .

The height of the round Ampoules should be proportional to the diameter. In the event of unusual height, kindly get the Ampoules examined at our works before putting the machine into operation.

Size of rondo trays.

The machine is suitable for following dimensions of the rondo trays.

Output 40 Tray / Minitue
Power 415 Volts, 3Ph, 5 Wire Systems, 50 Cycle/ Sec.
Electrical Rating 1 HP 1440 RPM
Finished/ Painted S.S. Finish
Overall Dimension (In mm) L 2000 x W 800 x H 1500 (In mm)
Net Weight 500kgs Approx.
Input Specification:
Container (Object) Diameter 10 to 17 mm
Container Height 50 to 80 mm
Rondo Length 220 mm
 
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • A. H Industries (A. H Industries)
  • 2, Laxmi Industrial Estate, Navneet Compound,Ajod Daity Road, Rahkial,, Rakhial, Ahmedabad, Gujarat - 380023
  • Share us via
List of Other Products by A. H Industries from Ahmedabad, Gujarat.
Post Buy Requirement
AH
Ahmedabad, Gujarat, India
Add Review

Other Products / Services #4139041

Automatic Four Head Liquid Bottle Filling Machine

AUTOMATIC LIQUID BOTTLE FILLING AND ROPP CAP SEALING MACHINE
MODEL: AHBF 4
Salient Features:
No Bottle - No Fill" system.
All contact parts made of SS316 material with Autoclaving/Sterilization/Cleaning.
FMachine construction in SS 304 material.
Diving Nozzle for Foam free filling.
With Fill Accuracy.
Automatic In-feed and Exit of Bottles.
Minimum Change Over time.
Digital counter.
Built-in A.C. Variable Frequency Drive System.
Process Operation:
Bottles are feed on to in-built Infeed turn table, from where it delivered to SS conveyor belt. Conveyor belt transport bottles to filling station. Filling station has mechanical bottle stopper for exact bottle neck centering of bottles during filling operation. Nozzle goes upwards slowly from the bottom level of bottle towards neck during filling to minimize forming adjustable nozzle is reciprocating according to filling dose. The dosing block with a hexagonal bolt, this means different fill size can be set easily within minimum use of time. After liquid filling bottles are delivered to capping/labeling machine conveyor for further operations.
View Complete Details

Optical Visual Ampoule Inspection Machine

OPTICAL VISUAL AMPOULE INSPECTION MACHINE
MODEL: AHIM 6
SALIENT FEATURES:
All contact parts in stainless steel.and approved engineering plastics.
Spinning of ampoule/vial.Magnifyed view with back lighting
Clear view of six ampoule/vial.
Modular and compact ejection system.
Rotation of spinners can be adjusted to give desired vortex on liquid
Easy access for cleaning and maintenance.
Large inspection to transport time ratio.
Facility of repeat cycle.
LED as well buzzer assisted safe rejection.
Counters for good and reject products.
OPERATION:
The filled ampoules are loaded in to the infeed chute/ hopper from where they are transferred in batches by an index wheel onto a linear transfer rack.
The rack transfers the ampoules onto the inspection station, where spinners spin the ampoules at a predetermined RPM so that a vortex is formed. Illumination from behind the ampoules assists in light refraction of particles/fibers .
An operator views six ampoules through a magnifying glass.
The ampoules are rejected by pressing rejection switches ergonomically located for operator convenience. A numbered light positioned just above the magnifying lens within the operator's field of vision lights up indicating a rejection In case a recheck is desired before checking the next lot, a facility for repeat cycle is provided.
The ampoules batch is then transferred onto the rejection station where the ampoules rejected at the inspection station are automatically ejected out. A numbered light lights up above the lens indicating a positive rejection taking place. In addition a rejection LED as well buzzer assists in tracking the actual rejects of objects.
The accepted ampoules are transferred onto the collection station where there are collected in a tray.
MACHINE IS SUPPORTED WITH DOUBLE BACKGROUND OPTION TO DETECT BLACK AS WELL WHITE PARTICALS

Electrical rating

Main machine : 0.75 hp, 1440 rpm

Spinning assembly : 0.25 hp, 1440 rpm

Power characteristic 220 volts, 1 phase,  
Finish/painted S. S. Finish
Overall dimensions 1600 mm (l) x   1100 mm (w) x 1600 mm (h)

Net weight

500 kgs.

Output(ampoules)

60-72/minute (depend on operator’s skill)

Output(vials)

48-56/minute (depend on operator’s skill)

Loading and unloading

As per your requirements

Input specifications:

Diameter min. 9mm to  15 mm

Height min. 60 mm to 116 mm

View Complete Details

Optical Visual Vial Inspection Machine

OPTICAL VISUAL VIALS INSPECTION MACHINE
MODEL: AHIM 3 & AHIM 4
SALIENT FEATURES:
All contact parts in stainless steel and approved engineering plastics.
Spinning of vial Magnified view with back lighting
Clear view of four vials.
Modular and compact ejection system.
Rotation of spinners can be adjusted to give desired vortex on liquid
Easy access for cleaning and maintenance.
Large inspection to transport time ratio.
Facility of repeat cycle.
LED as well buzzer assisted safe rejection.
Counters for good and reject products.
OPERATION:
The filled vials are loaded in to the infeed turntable from where they are transferred in batches by an index wheel onto a linear transfer rack.
The rack transfers the vials onto the inspection station, where spinners spin the vials at a predetermined RPM so that a vortex is formed. Illumination from behind the vials assists in light refraction of particles/fibers .
An operator views four vials through a magnifying glass.
The vials are rejected by pressing rejection switches ergonomically located for operator convenience. A numbered light positioned just above the magnifying lens within the operator's field of vision lights up indicating a rejection In case a recheck is desired before checking the next lot, a facility for repeat cycle is provided.
The vials batch is then transferred onto the rejection station where the vials rejected at the inspection station are automatically ejected out. A numbered light lights up above the lens indicating a positive rejection taking place. In addition a rejection LED as well buzzer assists in tracking the actual rejects of objects.
The accepted vials are transferred onto the collection station where there are collected in a tray.
MACHINE IS SUPPORTED WITH DOUBLE BACKGROUND OPTION TO DETECT BLACK AS WELL WHITE PARTICALS.

Electrical rating

Main machine : 0.75 hp, 1440 rpm

Spinning assembly : 0.25 hp, 1440 rpm

Power characteristic 220 volts, 1 phase,  
Finish/painted S. S. Finish
Overall dimensions 1600 mm (l) x   1100 mm (w) x 1600 mm (h)

Net weight

500 kgs.

Output(ampoules)

60-72/minute (depend on operator’s skill)

Output(vials)

48-56/minute (depend on operator’s skill)

Loading and unloading

As per your requirements

Input specifications:

2ml to 10ml vials can run in four head machine (four vials come in to inspection zone) and if to run 2ml to 30ml vials machine fitted with three heads (three vials come in to inspection zone)

View Complete Details

Semi Automatic Sticker Labeling Machine

Semi Automatic Sticker Labeling Machine
MODEL:AHL 150S
We offer a wide range of Automatic Slant Ampoule/Vial Sticker Labeling Machines that are fabricated using high quality components. These cater to the needs of various industries and are offered at industry prices. Further, these are available with optional accessories like printing devices. In addition, these are offered with the A.C. Drives for speed controls and no objects no label systems objects sensors and label sensors.
Mode Of Operation & Description:
The machine apply labels ampoules, vials and other cylindrical containers with diameter from 10mm minimum to 45mm maximum.
It uses sticker labels having width of 20mm minimum and a length of 40mm minimum to a width of 50mm maximum and length of 100mm maximum from the sticker roll.
The rated output is 150 containers per minute maximum. It is recommended to use labels of 60 to 65 gsm to achieve rated output. The mechanical machine speed is variable unto this rated output.
The Loading hopper releases containers into a roller conveyor in which each containers each held some distance by separators rollers and back up guide are passed to the labeling station in an upright position.
When the ampoules/vials reaches to the labeling station, the sensor operates the servo motor. At this point of time, the sticker touches the ampoules/vials and wrapped over the ampoules/vials by the driven belt on roller.
Then Rubber belts press the Labels on ampoules/vials during passing through Rubber belt.
The labeled ampoules/vials pushed to unloading tray.
Specifications:
Electrical Rating: 0.5 HP
Power Characteristic: 230 Volts, 1 phase
Finish/Painted: S.S. Finish
Dimensions: 1500 mm (L) x 600mm (W) x 1200mm (H)
Net Weight: 400 KGS.
Output/Hour: 6000 TO 9000 objects
Ampoules Size: 1ml to 10 ampoules
Vials Sizes: 2ml to 30 ml vials
E-catlogueCheap Michael Kors uk

View Complete Details

Automatic Ampoule Paper Rondo Tray Packing Machine

Automatic Ampoule Paper Rondo Tray Packing Machine
MODEL: AHRP 40C
SUITABLE FOR C & I TYPE PAPERS TRAYS PUTTING INTO OPERATION

Basic units consist of a rondo tray hopper, a denesting station, a product hopper, a rotary filling stations, an inserting wheel, and controls switches.

The machine should be used for Ampoules to be packed in rondo trays for which it has been fitted with.

The nested trays are placed directly in the rondo tray hopper in the same position as received from the suppliers. Filled and labeled ampoules are placed in the product hopper in vertical position.

Now, operate the machine for a short time, by pressing inching Push Button with a view to obtain uniform packing of ampoules in to rondo trays.

The dog chain moves out each pair of nested rondos and transfers them to the denesting station where they are separated and positioned face up.

The rotary transfer wheel picks up a preselected number of ampoules and drops them in the rondo flutes.

The ampoules next are firmly inserted in to the flute of the rondo by means of the inserting wheel. Direction Of The Operation Will Be Left To Right.

Machine occupies very little floor space as compare to hand packing.

Machine occupies very little floor space as compare to hand packing.

Very simple in operation. Size changes take less than fifteen minutes and require no special tools.

Machines efficiency allows short runs and frequent changes.

If ampoules placement found satisfactory, the machine is put into operation.

Now push green push button for continuous operations.

Size of Ampoules:
The machine used to pack Ampoules from 10mm to 17mmin diameter in to rondo trays in the horizontal position .

The height of the round Ampoules should be proportional to the diameter. In the event of unusual height, kindly get the Ampoules examined at our works before putting the machine into operation.

Size of rondo trays.

The machine is suitable for following dimensions of the rondo trays.

Change parts:
The machine is fitted with the change-parts suitable for any one size of Ampoules as per the order and samples tried out.
The machine can be pre-set for the different size of Ampoules and rondos trays with change-parts.
the changes in star wheel depends on change in ampoules diameters, changes in numbers of fills per rondo or changes in rondo dimensions.
Salient Feature:
Flap opening station, over printing device, flap closing station & gumming station
Airjet for flap opening
Online label applicator with online batch printing units for c types paper trays
No rondo no object
Ac drives
Digital counter

Technical Specification:
Output 40 Tray / Minitue
Power 415 Volts, 3Ph, 5 Wire
Electrical Rating 1 HP 1440 RPM
Finished/ Painted S.S. Finish
Overall Dimension (In mm) L 2800 x W 800 x H 1500
Net Weight 800kgs Approx.
Input Specification:
Container (Object) Diameter 10 to 17 mm
Container Height 50 to 80 mm
Rondo Length 220 mm
View Complete Details

Vial Sealing Machine

  • Electrical Rating 1 H.P.
  • Overall dimensions 1780 mm (L) x 1350 mm (W) x 1270 mm (H)
We are instrumental in offering automatic six head ampoule filling and sealing machine, model ahfs-6. These are highly appreciated by our clients for the sealing pre mechanism and for the feature of no ampoules no filling. We offer precision engineered automatic four head ampoule filling & sealing machine, model ahfs 4. automatic four head ampoule filling & sealing machines are manufactured using high quality components and are offered in customized solutions as per the needs of the clients. Further, automatic four head ampoule filling & sealing machine are available with a. C. Frequency drive that provides speed control for digital counter. In addition, we offer these with the pre sealing mechanism, which does not require ampoules or filling.
View Complete Details

Ampoule Inspection Machine

We are engaged in offering a wide range of Automatic AmpouleVial Inspection Machines. These are available with four tracks that are fabricated using nylon-6 rollers chain and are offered at competitive prices. Further, these are available with a spinning assembly that has A.C. Drives Rejection Units with 24V DC wiring. In addition, these can be availed with optional accessories like A.C. Frequency Drive for Speed Control Separate Machine that is required for ampoules and vials.
View Complete Details

Automatic Ampoule Loader Machine

AUTOMATIC AMPOULE LOADER MACHINE MODEL AHAL 432

Also Automatic Ampoule Loaders are available with automatic loading of ampoules in combi trays of multijet washing machines that save time. Further, these are precision engineered machines that are compatible with multijet washing machines and are offered at reasonable prices.

We offer our clients with a range of ampoules and vials Washing Machines that is manufactured using premium quality components. These are equipped with electrical controls that provide protection to the device against single phasing and motor overload. Further, these are appreciated by our clients for the features like long lasting and rust free finish. Our range of ampoules and vials Washing Machines includes multijet ampoules and vials washing machines.

Specifications:

Electrical Rating : 0.5 HP

Power Characteristic : 415 Volts, 3 Phase, 4 Wire system, 50 Cycles/Sec.

Finish/Painted : S.S. Finish / body Painted in Nickle-gray Colour

Overall dimensions : 890mm (L) x 1170mm (W) x 1270 mm (H)

Net Weight : 350 kgs. Approx.

Output/hour : 9000 Ampoules

Input Specifications:

Ampoules Size : 1ml to 5ml

Air : 5 cfm at 60 p.s.l.

Salient Features:

Time saving due automatic loading of ampoules in combi treys of multijet washing machines.

Tailor made machine is possible to make compatible with yours multijet washing machines.

View Complete Details

Automatic Linear Vial Washing Machine

AUTOMATIC LINEAR DOUBLE TRACKS VIAL WASHING MACHINE
MODEL : AHVW 120, AHVW 60
Operations:
The vial trays are directly un-loaded to the vial tray from which vials directly transfer to the turn-table.
The turn table slowly transfer vials to the linear washing machine in single track or two tracks feed warm, from where vials are automatically come in to invert position.
The synchronized star- wheel places two vials at a time in two tracks indexing chain or one vials in to the single track machine.
The indexing chain positively carries inverted pair of vials through seven sequential washes.
At the end of washing operation vials are re-inverted back into original and collected in the tray.
Pumping station:
Tank with valve 3 NOS.
SS 316 pump 3 NOS.
S.S. Filter housings and filter cartridges.
Change parts:
Change over of each vial size contain star wheels, worms, inverters./div>
Technical specifications:
SS finish gmp model
Dimension: 1600mm l >< 800mm w>< 800mm h
Electrical: single phase
Output: 3000- 4000 vials per hours in case single track machine
6000- 8000 vials per hours in case double track machine
View Complete Details

Inspection Table

Inspection table
MODEL: AHIM 3 & AHIM 4
Salient features:
Black and white board as per gmp norms .
Adjustable height of machines.
Number of persons sitting capacity (as per your requirements).
SS frame structures .
Moving conveyors belts.
Ac drives.
Gears motors.
Operation moving conveyors:
Inspection table is equipment consisting of three-track conveyor with dividing a hood and lighting arrangement with visual inspection background of alternate black and white color. Inspection table have stainless steel structure with moving pvc belts. Structure made out of S.S. Square pipe and supported on adjustable bolts.
The central conveyor belt brings the bottle from the capping machine conveyor. These bottles are automatically bifurcated on the two adjoining conveyor belts and further on the side tables for operator sitting on either side of the table. The operator sin turn pick up the bottles and visually inspect the bottles in the alternate white and black background to check for any particles in the liquid filled, sealed and breakage of bottle. After inspection the bottles are placed in the central track.
Technical specifications:
Number of operator as per end user requirements.
Number characteristics 0.5 hp / 220 volts / 50 hz.
Height of conveyor 860mm to 910mm as per end user requirements.
Machine dimensions 3000mm (l) x 700mm (w) x 1525mm (h).
net weight 200 kgs.
View Complete Details

Automatic Ampoule Plastic Rondo Tray Packing Machine

AUTOMATIC AMPOULE PLASTIC RONDO TRAYS PACKING
MODEL: AHRP 40U
Suitable for U type plastic trays

Basic units consist of a rondo tray hopper, a denesting station, a product hopper, a rotary filling stations, an inserting wheel, and controls switches.

The machine should be used for Ampoules to be packed in rondo trays for which it has been fitted with.

The nested trays are placed directly in the rondo tray hopper in the same position as received from the suppliers. Filled and labeled ampoules are placed in the product hopper in vertical position.

Now, operate the machine for a short time, by pressing inching Push Button with a view to obtain uniform packing of ampoules in to rondo trays.

The dog chain moves out each pair of nested rondos and transfers them to the denesting station where they are separated and positioned face up.

The rotary transfer wheel picks up a preselected number of ampoules and drops them in the rondo flutes.

The ampoules next are firmly inserted in to the flute of the rondo by means of the inserting wheel. Direction Of The Operation Will Be Left To Right.

Machine occupies very little floor space as compare to hand packing.

Machine occupies very little floor space as compare to hand packing.

Very simple in operation. Size changes take less than fifteen minutes and require no special tools.

Machines efficiency allows short runs and frequent changes.

If ampoules placement found satisfactory, the machine is put into operation.

Now push green push button for continuous operations.

Size of Ampoules:
The machine used to pack Ampoules from 10mm to 17mmin diameter in to rondo trays in the horizontal position .

The height of the round Ampoules should be proportional to the diameter. In the event of unusual height, kindly get the Ampoules examined at our works before putting the machine into operation.

Size of rondo trays.

The machine is suitable for following dimensions of the rondo trays.

Output 40 Tray / Minitue
Power 415 Volts, 3Ph, 5 Wire Systems, 50 Cycle/ Sec.
Electrical Rating 1 HP 1440 RPM
Finished/ Painted S.S. Finish
Overall Dimension (In mm) L 2000 x W 800 x H 1500 (In mm)
Net Weight 500kgs Approx.
Input Specification:
Container (Object) Diameter 10 to 17 mm
Container Height 50 to 80 mm
Rondo Length 220 mm
 
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • A. H Industries (A. H Industries)
  • 2, Laxmi Industrial Estate, Navneet Compound,Ajod Daity Road, Rahkial,, Rakhial, Ahmedabad, Gujarat - 380023
  • Share us via