A.S Conveyor International

Sector 9, Bahadurgarh, Haryana

Product :- Enrober Conveyor Material: – Stainless Steel 304/316 Wire Diameter:- 1.4mm-2.6mm Mesh Size:- Varies for different application. Could be made to your specification or design. Application:- Food Machinery, Enrober System, Automation Line, Conveyor System and so on *Special Specification could be manufactured according to your drawing or design. Please contact us directly.

Its articulated biscuit baking oven band used for biscuit baking in oven made by 1mm to 1.8mm wire in both MS and SS wire

Its a complex wire mesh used for salt drying , load carrier and many more. Its available in all gauge of wires and any type of wire like ms , ss etc

Z-47 type band are manufactured using carbon steel of stainless steel or stainless steel wire coils meshed into one another lamination of the obtained weave gives a perfectly flat surface which allows free air circulation for rapid drying & backing. Since the coils articulate Into one another, Z-47 Band have a greater longitudinal flexibility to enable the band to follow the over roller & tensioned surfaces. Z-47 band edges have been carefully designed in order to strengthen the sides while the band keeps entirely its flexibility without any uneven thickness. As per the requirement, the Z-47 Articulated Wire Band are made from 17 gauge (1.40mm) & 18 gauge (1.20mm), 20 gauge (0.90mm) wire of carbon steel & stainless steel 304.

CARBON Carbon is the principle hardening element in steel. With iron, carbon combines to form carbide, which is hard and brittle. The increment in carbon percentage within steel, increases the hardness of steel. MANGANESE Manganese is deoxidizer. It is important to free cutting steels, as the risk of hot shortness is reduced. It adds to the strength and hardness of carbon steels. Steels containing more than 18% Mn will remain non-magnetic even after important cold working operations. PHOSPHORUS Phosphorus increases strength and hardness of steel. It also increases the susceptibility to temper brittleness. Phosphorus embrittlement increases with rising carbon content, higher hardening temperatures grain growth and with decreasing ratio of reduction by forging.

CARBON Carbon is the principle hardening element in steel. With iron, carbon combines to form carbide, which is hard and brittle. The increment in carbon percentage within steel, increases the hardness of steel. MANGANESE Manganese is deoxidizer. It is important to free cutting steels, as the risk of hot shortness is reduced. It adds to the strength and hardness of carbon steels. Steels containing more than 18% Mn will remain non-magnetic even after important cold working operations. PHOSPHORUS Phosphorus increases strength and hardness of steel. It also increases the susceptibility to temper brittleness. Phosphorus embrittlement increases with rising carbon content, higher hardening temperatures grain growth and with decreasing ratio of reduction by forging.

CARBON Carbon is the principle hardening element in steel. With iron, carbon combines to form carbide, which is hard and brittle. The increment in carbon percentage within steel increases the hardness of steel. MANGANESE Manganese is deoxidizer. It is important to free cutting steels, as the risk of hot shortness is reduced. It adds to the strength and hardness of carbon steels. Steels containing more than 18% Mn will remain non-magnetic even after important cold working operations. PHOSPHORUS Phosphorus increases strength and hardness of steel. It also increases the susceptibility to temper brittleness. Phosphorus embrittlement increases with rising carbon content, higher hardening temperatures grain growth and with decreasing ratio of reduction by forging.

This is combing open area with good load. Carrying capabilities. Honey comb belt is manufactured from pierced strip, formed into castellation & joined with cross rods with Welded selvedges. Available in 1.60mm, 1.40mm (1.20mm & 0.90mm Wire) Carbon Steel or Stainless Steel. Used For Salt drying, load carrier.

Specification 22 coils if 10 SWG wire per foot length. 22 cremped cross member of 10 SWG per fool length welded selvedges. Available in (3mm, 2mm, 1.60mm, 1.40mm 1.20mm) of carbon steel & stainless steel. Service Especially suitable for glass annealing lehers & for heat treatment purpose.

Lk6 is cooling conveyor belt used in biscuit baking industries made in 1.2mm to 2mm wire in ms wire and ss wire.

Specification 30 coils of 16 SWG wire per foot length 30 cremped cross member of 16 SWG wire per foot length. Available in (2mm, 1.60mm, 1.40mm, 1.20, 0.90mm) of carbon steel & stain less steel welded selvedges. Service Used in Biscuit industry for cooling & oil spray purpose, soap drying, utensil heat treatment.