Ghaziabad, Uttar Pradesh, India
Verified
Add Review
Our Products
AHAHeat Exchangersshare one thing in commonheat transfer through plates instead of tubes. Turbulent flow at low velocity produces high heat transfer efficiency and low fouling. The result.compact units with small heat transfer areas compared to conventional shell & tube exchangers. Plate exchangers conserve both material and labor resources, reducing up-front costs and future operational costs. Each of our manufactured Heat Exchanger is warranted for long trouble free performance with minimal maintenance. AHA Heat Exchangers are made robust by Design to withstand toughest of stresses present both at the fabrication and operational levels.
Range Of Products:
Shell & Tube Heat Exchanger.
o Oil Coolers.
o Gas Coolers.
o Condensers.
o Pre-heaters.
o Chillers.
o LP/MP/HP Feed Water heaters.
o Inter/After Coolers.
Fin/Plate Type Heat Exchanger.
o Air Coolers.
o Steam Coil Air Pre-heaters.
o Nitrogen Coolers.
o Exciter Coolers.
AHA Oil Chillers are specially designed to cool oil directly through refrigerant-to-oil heat exchanging circuits. The Chillers are designed to handle the oil entering the evaporator at higher than normal temperatures, even the outlet temperature of the oil also being considerably higher than the standard process cooling applications. These Chillers are designed to work within extreme tropicalized weather conditions, handling high fluid temperatures, which makes the design of these Chillers intricate and very special.
Designing and the choice of equipment are critical to conform to peculiar cooling requirements as well as very high oil pressures. Oil Chillers are made in both Water-cooled as well as Air-cooled types. The Chillers are compact, oil pumps are mounted on skid and are completely factory made and tested.
Advantages :
Precise temperature controllability.
Constant outlet temperature at varying ambient conditions.
Wide operating temperature range.
Suitable for indoor and outdoor installation.
Closed loop and hence contamination free.
Minimum Maintenance.
Highly recommended for fluctuating loads eco- friendly.
Our organization also specializes in offering a comprehensive array of Pneumatic Accessories. These accessories are manufactured in strict compliance with industry defined standards. Further, to leave no scope for even minute defects, these accessories are stringently checked by quality controllers on various parameters.
Range Of Products :
Flow Control Valves.
One Touch Fittings.
Air Blow Gun.
Nipples.
Junction Box.
Silencer.
Quick Coupler.
Polyurethane Tubes Colored.
Polyurethane Coiled Tube.
Tube Holder.
Couplings.
Different Types of Tapes.
Different Types of Rings.
Mufler.
Springs & Plugs.
We are offering a heavy-duty Hydraulic Billet Shearing Machine which has a large production capacity. Our Hydraulic Billet Shearing Machine is made from using quality tested rolled plates and latest technology to endure high stress. Hydraulic Billet Shearing Machine offered by us, is extensively used to cut varied sized billets. We are an eminent Manufacturer and Supplier of Hydraulic Billet Shearing Machine from Uttar Pradesh (India). Customers can avail them from us at market leading prices.
Features :
Additional Information:
Payment Terms : L/C, D/A, Western Union,
Delivery Time : 4 month
Adhering to the set industry standards and norms, we design and develop Hydraulic Accumulator which is used to increase the energy efficiency of hydraulic systems. We are an eminent Hydraulic Accumulator Manufacturer and Supplier in Uttar Pradesh. Our Hydraulic Accumulator is robust and versatile. It acts as a storage device to store hydraulic pump output flow when system demand is low and supplement output when demand is high. Customers can avail them from us at affordable rates.
Specifications :
Key Features :
We offer a wide range ofconveyor beltsfor indoor & processing conveyors, for trouble free performance. Simple transportation or complex automation, AHA conveyors supplied have met customer expectations.
A conveyor system is a common piece of mechanical handling equipment that moves materials from one location to another. Conveyors are especially useful in applications involving the transportation of heavy or bulky materials. Conveyor systems allow quick and efficient transportation for a wide variety of materials, which make them very popular in the material handling and packaging industries. This system has proved its efficacy in different industries like tea processing, leather processing, automobiles, cement & chemical, etc. It has been proved that the installation of this conveying system reduced cost by 50%, it is maintenance free and have a longer service life. In addition, it also optimize on the space utilization, which in turn reduce workmen fatigue and increase labor productivity ensuring quick payback and low down time.
Types Of Conveyors:
Floor Conveyors.
o Roller Conveyor.
o Belt Conveyor.
o Chain Conveyor.
o Slat Conveyor.
o Special Purpose Conveyor.
o Tow Conveyor.
Conveyor Spare Parts.
We are a reckoned enterprise, which is engaged in delivering Hydraulic Spares to the clients. The offered range of hydraulic spares is made utilizing optimum grade raw material and innovative technology in strict confirmation with the international quality norms and standards by vendors. Along with this the offered range of hydraulic spares is suitably checked on different characteristics to maintain its authenticity throughout the designing process. Range Of Products : Level Gauge. Diffuser. Magnetic Cleaners. Different Types Of Breather Assembly. Suction Strainers. Diaphragm/Accumulator. Filters. Hydraulic Valves. Motor Pump Unit. Gland Packing. Charging & Testing Unit. Seal Kit.
We are offering a ferrous ace Metal Scrap Baling Machine to customers in the domestic market. Our Metal Scrap Baling Machine is made out of mild steel plates with adequate steel stiffeners. It is reliable and ensures fast production. Being an eminent Metal Scrap Baling Machine Manufacturer and Supplier from Uttar Pradesh (India), we can design our machine for processing ferrous or non-ferrous scrap in various forms. Additionally, Hydraulic operation of pressing system minimizes the breakdown and the power consumption. To make the unit compact and sturdy, high pressure pumps coupled with motor are mounted directly on the oil tank.
Specification :
We offer a wide range of Hydraulic Shearing Machine which is fabricated using premium quality raw materials and plates. It comprises of interlocked construction with a bed that directly supports the side walls for maximum accuracy and perfect alignment. Our range also includes durable and multipurpose brakes that offer longer functionality even in unfavorable conditions. Besides this, we are also offering an all-inclusive range of industrial machine, hydraulic press machine and special purpose machine etc. to customers in the domestic market.
Silent Feature :
Special Accessories :
We are a reckoned enterprise, which is engaged in delivering Hydraulic Spares to the clients. The offered range of hydraulic spares is made utilizing optimum grade raw material and innovative technology in strict confirmation with the international quality norms and standards by vendors. Along with this the offered range of hydraulic spares is suitably checked on different characteristics to maintain its authenticity throughout the designing process.
Range Of Products :
Level Gauge.
Diffuser.
Magnetic Cleaners.
Different Types Of Breather Assembly.
Suction Strainers.
Diaphragm/Accumulator.
Filters.
Hydraulic Valves.
Motor Pump Unit.
Gland Packing.
Charging & Testing Unit.
Seal Kit.
The hydraulic cylinders we offer are most often used in construction equipment, manufacturing settings, and other heavy-duty applications where extremely heavy loads must be lifted or pushed. Featuring an innovative sealing design, Our industrial grade welded cylinders are built with high-yield strength steel to keep systems operating smoother, stronger and longer.
The main construction of a hydraulic cylinder includes a barrel, piston with sliding rings and seals, and a piston rod. Differences in construction are present in single acting, double acting, single rod and double rod variations.
Single acting cylinders function with one side of the piston being acted on by hydraulic or other pressurized fluid, while the fluid alternates action on both sides of the piston in a double acting cylinder.
If the cylinder is double acting with a double rod design, the pistons head is equally covered by a rod on each side with no force difference. This requires less operator force to produce a push or a lift than a cylinder with a double acting, single rod design.
Range Of Manufacturing :
o Bore Size 32mm to 800mm
o Stroke Length upto 10, 000mm
o Working Pressure upto 600 bar
Types of Hydraulic Cylinder :
o Double Acting Single Stage Hydraulic Cylinder.
o Double Acting Multi Stage Telescopic Hydraulic Cylinder.
o Single Acting Single Stage & Multi Stage Hydraulic Cylinder.
o Hollow Rod Hydraulic Cylinder.
o Through Rod Hydraulic Cylinder.
o Customized Pneumatic Cylinder.
o Tie Rod Cylinder.
o Welded Cylinder.
o Ram Type Cylinder.
o Bending & Balancing Cylinder.
o Military Application Cylinder, Precision Missile launcher cylinder for -40 C Ambient Temperatures
o High Pressure Extrusion Press Cylinder - Working Fluid Distilled Mineral Water (98%)
o Cylinder with position sensors and integrated valves.
o And many more.
Oil Skimmer is efficient in removing oil, fats, grease etc. from the surface of water or coolant. We are offering a quality range of Oil Skimmers which are highly cost effective and durable. It is capable of regulating the speed accordingly and is energy efficient. Being a prime Oil Skimmer Manufacturer and Supplier in Uttar Pradesh (India), we can make available our product in various shapes, sizes and dimension as per the customer’s requirements.
Hose Pipes are ideally used in various high and low pressure industrial hydraulic applications. We are an eminent Hose Pipes Manufacturer and Supplier in Uttar Pradesh (India). We are offering a wide range of Hose Pipes comprising inner tube of synthetic rubber. Our Hose Pipes are designed to handle temperature range from -40oc to + 100oc. Customers can avail them from us at economical rates.
Features :
Our wide assortment of Hydraulic Seals offers standard and customized solution for fluid power applications. We are a renowned Manufacturer and Supplier of Hydraulic Seals in Uttar Pradesh (India). Our range of Hydraulic Seals includes rod, piston and wiper seals as well as guides, o-rings and back-up rings. We make available our Hydraulics Seals in varied shapes, sizes and dimensions to fulfill the variegated demands of the customers. Additionally, SKF fluid power seals are available in a multitude of materials to provide optimal compatibility with the various hydraulic fluids encountered in service.
We are one of the leading Hydraulic Valve Manufacturers and Suppliers in Uttar Pradesh. Our wide assortment of Hydraulic Valve is fabricated using quality grade material and advanced machinery at our high end production facility. Hydraulic Valve offered by us, has an extended durability, high strength and is thoroughly checked on various parameters to ensure their quality. Customers can avail them from us at affordable prices.
We are offering a wide range of Hydraulic Pump which is manufactured in compliance with the set industry norms and standards at our high end production facility. Our Hydraulic Pump has a robust construction, operational fluency and requires low maintenance and low power consumption. It is durable and has a perfect finish. In addition, our Hydraulic Pumps are widely used in numerous applications of the industry. Contact us for more details.
AHA is one of the leading hydraulic power packs manufacturers in India. Hydraulic power packs are hydraulic equipments with pumps, valves, motors and other accessories. These hydraulic power packs are available for both small and large duty applications. Hydraulic power packs, specialists in design and manufacturing, AHA provides a hydraulic power pack for Mobile and Industrial applications around the nation. Our hydraulic power units are designed and manufactured in-house using the latest technology, this enables us to be competitive in the national market.
AHA also builds customized hydraulic power packs for user specifications. The power packs are built with hydraulic elements of reputed makes with international mounting and manifold style valve assembly. They can be provided with the electrical relay/PLC/CNC control systems too. Complete turnkey projects are undertaken. In addition, we also undertake reconditioning, retrofitting and upgrading of customers hydraulic systems.
Range Of Manufacturing :
o Power 1hp to 100hp
o Pressure 70 to 700 kg/sq. cm
o Flow 0.5 lpm to 400 lpm.
(Extra on Special Requests)
o Oil tank (totally close), are equipped with oil filter, air- breather, oil level indicator, cleaning windows etc.
o Manifold type circuitry to minimize intricate piping structure.
o Optional cooler attachment for oil cooling.
o All pumps, valves and accessories, motor and electrical equipment from reputrd manufacturers (Vickers, Rexroth, Yuken, Polyhydron etc.)
o Flame proof and explosion proof electrical motor starter, switches, control panel, hydraulic valves etc. for power pack unit used in inflammable and hazardous area.
Technical Data :
Broaching is a machining method in which a series of cutting teeth each remove a portion of stock as the cutting tool (broach) moves past or through the work piece. Combining both roughing and finishing in one operation Broaching removes stock to precise tolerance faster than any other known metal cutting process. Broaching is highly productive Metal Cutting Process, in which the metal is removed by successive action of number of cutting teeth incorporated in the tool called Broach.
The broaching process, similar to shaping with multiple teeth, is used to machine internal and external surfaces such as holes of circular, square, or irregular shapes, keyways and teeth of internal gears. A broach is a long multi-tooth cutting tool with successively deeper cuts.
Broaching is a significantly superior process having certain positive advantages like:
Short Cycle Time with High Accuracy.
Complicated irregular shapes can be easily cut.
Remarkably Stable Process Accuracy.
Superior Finished Faces.
Extremely Economical.
Types Of Broaching Machines:
Vertical Internal Pull Down Broaching Machine.
Push Type Broaching Machine.
Horizontal Broaching Machine.
Range Of Manufacturing:
Capacity 1ton to 30 ton.
Stroke 450mm to 2000mm.
Cutting Speed 5 to 10 m/min.
Return Speed 15 to 30 m/min.
Driven by technology, we manufacture, supply and export comprehensive array ofElectrical Panels.Our range is technologically advanced a made with premium quality basic material. The products are used for managing the power supply without breaking the circuit. These are installed in homes, offices, industries and various other places. Electrical Panels can be installed very easily. These Electrical Panel is fabricated form the finest quality of the raw material procured from the trusted vendors of the industry.
These are used to transfer power in the different motors and machines in various industries such as defense, pharmaceutical, petrochemicals, automobile, electronic, chemical, and sugar industry.
Some highlighting features of our range are :
Optimum performance
Good capacity to bear loads
Easy installation
Low maintenance
AHAHeat Exchangersshare one thing in commonheat transfer through plates instead of tubes. Turbulent flow at low velocity produces high heat transfer efficiency and low fouling. The result.compact units with small heat transfer areas compared to conventional shell & tube exchangers. Plate exchangers conserve both material and labor resources, reducing up-front costs and future operational costs. Each of our manufactured Heat Exchanger is warranted for long trouble free performance with minimal maintenance. AHA Heat Exchangers are made robust by Design to withstand toughest of stresses present both at the fabrication and operational levels.
Range Of Products:
Shell & Tube Heat Exchanger.
o Oil Coolers.
o Gas Coolers.
o Condensers.
o Pre-heaters.
o Chillers.
o LP/MP/HP Feed Water heaters.
o Inter/After Coolers.
Fin/Plate Type Heat Exchanger.
o Air Coolers.
o Steam Coil Air Pre-heaters.
o Nitrogen Coolers.
o Exciter Coolers.
