New generation press brake SPEEDERMAK with max. speed, performance and productivity achieves the goals of mass production. SPEEDERMAK moves more at high speeds, its stopping distance and speed alteration points distances are less according to the ordinary units. Also max. safety is provided by Laser and special safety equipments without making a concession at productivity. The operator can hold the steel near to the die confidently while the punch approaching at a high speed when working with Laser Safety System installed SPEEDERMAK Hands and fingers are protected by continuously activated laser senses just under the punch area. If Laser Safe controller (LZS-003 or PCSS series! determines any obstacle, instantly stops the movement of punch and thus punch never touches to the obstacle. In comparison to working with conventional light barriers or double hand buttons. Laser Safe protection system gives the possibility of working more safety and high productivity by means of reacting both high sensitive and speedy. All used inputs and outputs suit to CE safety regulations as well. Maximum functionality is aimed with elevated standard hardware.

• High Speed. High Performance Press Brakes: The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control.
• With automatic indexing of the axes at the start of running process, calibration is provided.
• Data inputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following:
• Determination of bending power required for each stroke.
• Graphical display of the unfolding of bending parts.
• Positioning of the back gauge for each step of the bending program,
• Determination of the most practical bending sequence
• Automatic calculation of top beam stroke for bending angle.
• Adaptation condition of tools and work pieces.
• Graphical display of potential interferences between material, tools and the machine.
• Storage of programs with alpha-numerical names and recalling.
• Programmable bending speeds.
• Manuel, semi-automatic or automatic working modes, ' Upper beam tilting for conical bending.

New generation press brake SPEEDERMAK with max. speed, performance and productivity achieves the goals of mass production. SPEEDERMAK moves more at high speeds, its stopping distance and speed alteration points distances are less according to the ordinary units. Also max. safety is provided by Laser and special safety equipments without making a concession at productivity. The operator can hold the steel near to the die confidently while the punch approaching at a high speed when working with Laser Safety System installed SPEEDERMAK Hands and fingers are protected by continuously activated laser senses just under the punch area. If Laser Safe controller (LZS-003 or PCSS series! determines any obstacle, instantly stops the movement of punch and thus punch never touches to the obstacle. In comparison to working with conventional light barriers or double hand buttons. Laser Safe protection system gives the possibility of working more safety and high productivity by means of reacting both high sensitive and speedy. All used inputs and outputs suit to CE safety regulations as well. Maximum functionality is aimed with elevated standard hardware.

• High Speed. High Performance Press Brakes: The precision repeatability performance of these machines is achieved by synchronizing the hydraulic cylinders with the use of advanced proportional valve control.
• With automatic indexing of the axes at the start of running process, calibration is provided.
• Data inputs of material thickness, type and length through a user friendly software enables the control to calculate and provide the following:
• Determination of bending power required for each stroke.
• Graphical display of the unfolding of bending parts.
• Positioning of the back gauge for each step of the bending program,
• Determination of the most practical bending sequence
• Automatic calculation of top beam stroke for bending angle.
• Adaptation condition of tools and work pieces.
• Graphical display of potential interferences between material, tools and the machine.
• Storage of programs with alpha-numerical names and recalling.
• Programmable bending speeds.
• Manuel, semi-automatic or automatic working modes, ' Upper beam tilting for conical bending.