Post Buy Requirement
Acrifab Private Limited
Ahmedabad, Gujarat, India
gstGST : 24AALCA5878L1Z2 Verified Add Review

Other Products / Services

Non-Contact Measurement System

Non-Contact Measurement System manufactured, exported and supplied by us is widely used for different purposes. The Vision System is used in Production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision Inspection is completely replacing Manual inspection using higher accuracy and higher speed compare to Manual Inspection.

Applications
This system is mainly used for quality assurance in Automobile Industry, Electronics Industry and Automotive Industry. The different applications of system includes:-
  • Gear Inspection in Automobile
  • Piston Assembly Inspection in Automobile
  • Valve Assembly Inspection in Plastic/Auto Parts
  • Disk Brake Inspection
  • Injection Die Inspection
  • Pin presence/Absence in Electronics Chip
  • Ball Bearing Inspection
  • Needle Bearing Inspection
  • Roller Bearing Inspection
  • Casting Inspection
  • All kind of measurement like Linear Dimension, Angular Dimension etc.
  • To verify any pattern of the automotive part
  • Presence/Absence of parts in Electronics/Auto Products

Technical Specifications
  • It is totally customized solution according to different application and products.
  • This system includes following hardware :
    • High Resolution Ethernet Camera
    • Mega-Pixel Vision Optics
    • High Intensity Illumination
    • Industrial PC with high Configuration
    • Sensors
    • Air/Piston based Rejection System
  • The system is having Software for making decision according pre Defined Criteria.
  • We have VISION MATCH-IT software. The software is designed especially for Automotive/Plastic/Automobile/Electronics Industry.
  • Camera, Optics and Illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the Industrial PC(I-PC).
  • Sensor is used to synchronize vision system with machine.
  • There is software in the I-PC, processes and inspects particular image of the product/object and check that inspection criteria are fulfilled or not.
  • If product is failed to fulfill pre-defined inspection criteria, Software generates Rejection signal and transfers that signal to Rejection system so that product is rejected and stores values or images in report file which can be rejected.
  • Rejection System may be Air based or Piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejects/sorts particular defective product from production line.

Industries Where This Product Is Used
  • Electronics Product Manufacturer
  • Plastic Industry
  • Auto Parts Manufacturer
  • Machine Manufacturer for Automobile, Electronics, Automotive industry
  • Automobile parts and Assembly Manufacturer

Features
  • Machine Vision System is PC based Industrial Automation that is used for 100% Quality Assurance at very high speed.
  • Machine Vision System is throughout consistent during the work.
  • No energy decay.
  • 24 Hours availability without failure
  • Closed loop control with maximum accuracy
  • Plenty of data saving and fetching
  • High frequency Measurement
  • Very law maintenance cost and handling charge
View Complete Details

Label Inspection System

Our clients can avail from us Label Inspection System. The Vision System is used in Production line for the 100% quality assurance. It inspects for visible defect in the product/printing at high speed. Vision Inspection is completely replacing Manual inspection using higher accuracy and higher speed compare to Manual Inspection.

Applications
This system is mainly used for quality assurance in Pharmaceutical Industry, Food & Beverage Industry, Cosmetic Products Industry, Printing Press Industry, Packaging Industry etc. The different applications of system includes :
  • To verify Label Pattern and Color Verification
  • To check and verify OCR (Optical Character Recognition), Barcode, Pharmacode, 2D code on Label. These OCR contains the detail of the product like Batch no., M.R.P., Manufacturing Date, expiry date etc.
  • To check & verify the Numbers (Digits/Characters) at the time of Printing on Scratch-Cards, Recharge Vouchers, ATM/Debit/Credit Cards, Lottery Coupon, Application Forms etc.
  • Most useful to Track N Trace system which has been recently made compulsory in many countries for Pharmaceutical Products
  • To verify the Printing Quality

Technical Specifications
  • It is totally customized solution according to different application and products.
  • This system includes following hardware :
    • High Resolution Ethernet Camera
    • Mega-Pixel Vision Optics
    • High Intensity Illumination
    • Industrial PC with high Configuration
    • Sensors
    • Air/Piston based Rejection System
  • The system is having Software for making decision according pre Defined Criteria.
  • We have VISION PHARMA PLUS software. The software is designed especially for Pharma, Beverage, Cosmetic Products and Printing industries.
  • Camera, Optics and Illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the Industrial PC(I-PC).
  • Sensor is used to synchronize vision system with machine.
  • There is software in the I-PC, processes and inspects particular image of the product/object and check that inspection criteria are fulfilled or not.
  • If product is failed to fulfill pre-defined inspection criteria, Software generates Rejection signal and transfers that signal to Rejection system so that product is rejected and stores values or images in report file which can be rejected.
  • Rejection System may be Air based or Piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejects/sorts particular defective product from production line.
  • Particularly the printed data may be fixed(static), incremental variable, Random variable etc.
  • In case of Static data, the data is fed once at the time of starting the batch. For Incremental data, data is fed once in the software and increment counter is kept in the software so at every product the counter increased and compare with the data from label. And in case of variable data (specially used in Recharge Voucher, ATM/Debit/Credit Card), the database is loaded in the Software same as in the printer and make it verified with data printed on every card.

Industries Where This Product Is Used
  • Pharmaceutical product manufacturer
  • Pharma Machinery Manufacturer
  • Beverage Machine Manufacturer
  • Beverage Manufacturer
  • Pharma Row Material Manufacturer
  • Printing Press Industry
  • Scratch Card Machine Manufacturer
  • Scratch Card Printing Press Industry
  • Cosmetic Product Machine manufacturer
  • Sticker Label Printing Industry
  • Cosmetic Product Manufacturer

Features
  • Machine Vision System is PC based Industrial Automation that is used for 100% Quality Assurance at very high speed.
  • Machine Vision System is throughout consistent during the work.
  • No energy decay.
  • 24 Hours availability without failure
  • Closed loop control with maximum accuracy
  • Plenty of data saving and fetching
  • High frequency Measurement
  • Very law maintenance cost and handling charge
View Complete Details

Machine Vision Industrial

We are well trusted machine vision industrial pc manufacturers, exporters and suppliers. Full aluminum touch pc is a small and powerful pc system that is suitable for use in harsh work environments. It is distinguished from standard pc systems through silent operation and an increased stability, especially through the robust aluminum housing and by the lack of moving parts.

applications
  • industrial pc is mainly used as a panel pc. Machine vision system is a pc based camera vision system. I-pc is specially designed for the vision system.
  • it can also be used as a panel pc in machine as it is light weight and compact pc that covers all features of normal pc.

    • technical specifications
      • operating system : linux ubuntu 9.04 pre-installed,
      • drivers for windowslinux operating systems included
      • cpu : intel dual core
      • chipset : north bridge: intel 945gse;
      • south bridge : intel ich7m
      • memory : 1x1gbyte ddr ii sodimm
      • hard drive : 8gbyte sata ssd hard drive
      • graphic : gma950 graphics card
      • audio : realtek alc662,
      • 5.1 channel high definition audio codec
      • 2x 2w loudspeaker
      • network : 1000mbit rj45 ports
      • usb : 1 usb 2.0 ports,
      • external connectors : vga d-sub 15-pin, 1xusb 2.0, 1x 25-pin parallel port, 1xrj-45, power onoff, 2x 12v dc-in (1x screw-able)
      • internal io connectors : 1x mini pci-e(w-lan card with intel 4965 chip integrated)
      • 1x front panel audio header(used for loudspeaker)4x usb 2.0 header, 3x comrs232 header
      • com1, com2 used as external connectors
      • com2 switchable between rs232rs485 via jumper jp3, 1x front panel header
      • input voltage : 12v dc-in
      • operating temperature : 0o to +60o
      • driver : windows, linux; linux ubuntu 9.04 preinstalled

        • industries where this product is used
          • this product can be used in each and every kind of industry where compact size of pc required.
          • all kind of machine manufacturer
          • specially designed for machine vision system

            • features
              • mvp-121 I pc is throughout consistent during the work.
              • full touch screen operation so no need to use other input devices (i.e. Mouse & key board)
              • industrial pcs are dedicated for particular application so safe to operate and work on consistently.
              • very law maintenance cost and handling charge.
    View Complete Details

    Machine Vision Lenses

    We are offering machine vision lenses.
    13" 8mm f1.2 monofocal, manual iris (cs mount) monofocal manual iris machine vision lenses are an economical choice providing fixed focal lengths and a very simple and compact design. Other lenses are also there to be used with industrial cameras like 16mm, 5mm and 10 x zoom lens. Lenses are main part in vision system, without which properly focused image cannot be grabbed. For micro-measurement or high accuracy measurement application generally zoom lenses are used.

    applications
    • lenses are secondary major part in vision inspection system.
    • main purpose of lens to be used in vision inspection system is to grab clearly focused image.

      • technical specifications
        there are wide ranges of different types of lenses. Here we are describing widely used 8mm lens.
        • model no. : t0812fics-3
        • focal length : 8mm
        • max. Aperture ratio : 1:1.2
        • max. Image format : 4.8mm x 3.6mm (6mm)
        • mount : cs-mount
        • iris : manual
        • focus : manual
        • operating temperature : 20oc - 50oc
        • dimensions : 34.5mm x 33mm
        • weight : 37g

          • industries where this product is used
            • machine vision industry
            • microscopes manufacturer
            • industrial automation
            • pc based automation

              • features
                • lenses are throughout consistent during the work
                • high accuracy measurement
                • it is main part for clear image capture
                • very law maintenance cost and handling charge
      View Complete Details

      Machine Vision Lenses

      1/3" 8mm f1.2 Monofocal, Manual Iris (CS Mount) Monofocal manual iris Machine Vision Lenses are an economical choice providing fixed focal lengths and a very simple and compact design. Other lenses are also there to be used with industrial cameras like 16mm, 5mm and 10 x zoom lens. Lenses are main part in vision system, without which properly focused image cannot be grabbed. For micro-measurement or high accuracy measurement application generally zoom lenses are used.

      Applications
      • Lenses are secondary major part in Vision inspection system.
      • Main purpose of lens to be used in vision inspection system is to grab clearly focused image.

      Technical Specifications
      There are wide ranges of different types of lenses. Here we are describing widely used 8mm lens.
      • Model No. : T0812FICS-3
      • Focal Length : 8mm
      • Max. Aperture Ratio : 1:1.2
      • Max. Image Format : 4.8mm x 3.6mm (6mm)
      • Mount : CS-Mount
      • Iris : Manual
      • Focus : Manual
      • Operating Temperature : 20oC - 50oC
      • Dimensions : 34.5mm x 33mm
      • Weight : 37g

      Industries Where This Product Is Used
      • Machine Vision Industry
      • Microscopes Manufacturer
      • Industrial Automation
      • PC based Automation

      Features
      • Lenses are throughout consistent during the work
      • High accuracy measurement
      • It is main part for clear image capture
      • Very law maintenance cost and handling charge
      View Complete Details

      Track System

      We are offering track systeme, trace system.
      We are well trusted track and trace system manufacturers, exporters and suppliers. the vision system is used in production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision inspection is completely replacing manual inspection using higher accuracy and higher speed compare to manual inspection.

      applications
      this system is mainly used for quality assurance in pharmaceutical as well as in beverage and packaging industry. The different applications of system includes:-
      • to verify the products at the time of dispatch the material.
      • to check and verify ocr (optical character recognition), barcode, pharmacode, 2d code on label. These ocr contains the detail of the product like batch no., m.r.p., manufacturing date, expiry date etc.
      • for track n trace system, used for pharma product, cosmetic product etc.
      • track n trace system is most useful to get the data of the product from bulk, i.e. If there are 1000 products in single carton, one can get all detail of each and every product from the 2d code, printed on main carton.

        • technical specifications
          • it is totally customized solution according to different application and products.
          • this system includes following hardware :
            • high resolution ethernet camera
            • mega-pixel vision optics
            • high intensity illumination
            • industrial pc with high configuration
            • sensors
            • airpiston based rejection system
              • the system is having software for making decision according pre defined criteria.
              • we have vision reader plus software. The software is designed especially for pharma industries.
              • camera, optics and illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the industrial pc(i-pc).
              • sensor is used to synchronize vision system with machine.
              • there is software in the i-pc, processes and inspects particular image of the productobject and check that inspection criteria are fulfilled or not.
              • if product is failed to fulfill pre-defined inspection criteria, software generates rejection signal and transfers that signal to rejection system so that product is rejected and stores values or images in report file which can be rejected.
              • rejection system may be air based or piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejectssorts particular defective product from production line.

                • industries where this product is used
                  • pharmaceutical product manufacturer
                  • pharma machinery manufacturer
                  • beverage machine manufacturer
                  • beverage manufacturer
                  • cosmetic product manufacturer
                  • pharma row material manufacturer
                  • cosmetic product machine manufacturer

                    • features
                      • machine vision system is pc based industrial automation that is used for 100% quality assurance at very high speed.
                      • machine vision system is throughout consistent during the work.
                      • no energy decay.
                      • 24 hours availability without failure.
                      • closed loop control with maximum accuracy.
                      • plenty of data saving and fetching.
                      • high frequency measurement.
                      • very law maintenance cost and handling charge.
        View Complete Details

        Track And Trace System

        We are well trusted Track and Trace System Manufacturers, Exporters and Suppliers. The Vision System is used in Production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision Inspection is completely replacing Manual inspection using higher accuracy and higher speed compare to Manual Inspection.

        Applications
        This system is mainly used for quality assurance in Pharmaceutical as well as in Beverage and Packaging Industry. The different applications of system includes:-
        • To verify the products at the time of dispatch the material.
        • To check and verify OCR (Optical Character Recognition), Barcode, Pharmacode, 2D code on Label. These OCR contains the detail of the product like Batch no., M.R.P., Manufacturing date, expiry date etc.
        • For Track N Trace System, used for Pharma product, Cosmetic product etc.
        • Track N Trace System is most useful to get the data of the product from bulk, i.e. if there are 1000 products in single carton, one can get all detail of each and every product from the 2D code, printed on main carton.

        Technical Specifications
        • It is totally customized solution according to different application and products.
        • This system includes following hardware :
          • High Resolution Ethernet Camera
          • Mega-Pixel Vision Optics
          • High Intensity Illumination
          • Industrial PC with high Configuration
          • Sensors
          • Air/Piston based Rejection System
        • The system is having Software for making decision according pre Defined Criteria.
        • We have VISION READER PLUS software. The software is designed especially for Pharma industries.
        • Camera, Optics and Illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the Industrial PC(I-PC).
        • Sensor is used to synchronize vision system with machine.
        • There is software in the I-PC, processes and inspects particular image of the product/object and check that inspection criteria are fulfilled or not.
        • If product is failed to fulfill pre-defined inspection criteria, Software generates Rejection signal and transfers that signal to Rejection system so that product is rejected and stores values or images in report file which can be rejected.
        • Rejection System may be Air based or Piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejects/sorts particular defective product from production line.

        Industries Where This Product Is Used
        • Pharmaceutical product manufacturer
        • Pharma Machinery Manufacturer
        • Beverage Machine Manufacturer
        • Beverage Manufacturer
        • Cosmetic Product Manufacturer
        • Pharma Row Material Manufacturer
        • Cosmetic Product Machine Manufacturer

        Features
        • Machine Vision System is PC based Industrial Automation that is used for 100% Quality assurance at very high speed.
        • Machine Vision System is throughout consistent during the work.
        • No energy decay.
        • 24 Hours availability without failure.
        • Closed loop control with maximum accuracy.
        • Plenty of data saving and fetching.
        • High frequency Measurement.
        • Very law maintenance cost and handling charge.
        View Complete Details

        Label Inspection System

        We are offering label inspection system.
        Our clients can avail from us label inspection system. The vision system is used in production line for the 100% quality assurance. It inspects for visible defect in the productprinting at high speed. Vision inspection is completely replacing manual inspection using higher accuracy and higher speed compare to manual inspection.

        applications
        this system is mainly used for quality assurance in pharmaceutical industry, food & beverage industry, cosmetic products industry, printing press industry, packaging industry etc. The different applications of system includes :
        • to verify label pattern and color verification
        • to check and verify ocr (optical character recognition), barcode, pharmacode, 2d code on label. These ocr contains the detail of the product like batch no., m.r.p., manufacturing date, expiry date etc.
        • to check & verify the numbers (digitscharacters) at the time of printing on scratch-cards, recharge vouchers, atmdebitcredit cards, lottery coupon, application forms etc.
        • most useful to track n trace system which has been recently made compulsory in many countries for pharmaceutical products
        • to verify the printing quality

          • technical specifications
            • it is totally customized solution according to different application and products.
            • this system includes following hardware :
              • high resolution ethernet camera
              • mega-pixel vision optics
              • high intensity illumination
              • industrial pc with high configuration
              • sensors
              • airpiston based rejection system
                • the system is having software for making decision according pre defined criteria.
                • we have vision pharma plus software. The software is designed especially for pharma, beverage, cosmetic products and printing industries.
                • camera, optics and illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the industrial pc(i-pc).
                • sensor is used to synchronize vision system with machine.
                • there is software in the i-pc, processes and inspects particular image of the productobject and check that inspection criteria are fulfilled or not.
                • if product is failed to fulfill pre-defined inspection criteria, software generates rejection signal and transfers that signal to rejection system so that product is rejected and stores values or images in report file which can be rejected.
                • rejection system may be air based or piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejectssorts particular defective product from production line.
                • particularly the printed data may be fixed(static), incremental variable, random variable etc.
                • in case of static data, the data is fed once at the time of starting the batch. For incremental data, data is fed once in the software and increment counter is kept in the software so at every product the counter increased and compare with the data from label. And in case of variable data (specially used in recharge voucher, atmdebitcredit card), the database is loaded in the software same as in the printer and make it verified with data printed on every card.

                  • industries where this product is used
                    • pharmaceutical product manufacturer
                    • pharma machinery manufacturer
                    • beverage machine manufacturer
                    • beverage manufacturer
                    • pharma row material manufacturer
                    • printing press industry
                    • scratch card machine manufacturer
                    • scratch card printing press industry
                    • cosmetic product machine manufacturer
                    • sticker label printing industry
                    • cosmetic product manufacturer

                      • features
                        • machine vision system is pc based industrial automation that is used for 100% quality assurance at very high speed.
                        • machine vision system is throughout consistent during the work.
                        • no energy decay.
                        • 24 hours availability without failure
                        • closed loop control with maximum accuracy
                        • plenty of data saving and fetching
                        • high frequency measurement
                        • very law maintenance cost and handling charge.
          View Complete Details

          License Plate Recognition System

          Avail from us License Plate Recognition System also known as NPR Vision System. The NPR Vision System is used for speedy transportation and ease of collection of Toll Tax/ Parking charges. It is also used for security purpose at public place, Government Organization etc.

          Applications
          This system is mainly used for Security purpose as well as for collecting Toll TAX from each vehicle, No need to collect cash from the car owners, just from their Number plate, tax is credited from their account. The different applications of system includes :
          • Collect Tax/parking Charges from each Vehicle directly from the car owners account, no need to collect cash or swipe debit/credit card.
          • Give the penalty to that particular vehicle person if the number plate has the defect or not found on the vehicle.
          • Finding the vehicle is in the parking or not.
          • Generating alert notifications as any vehicle found suspicious material.

          Technical Specifications
          • It is totally customized solution according to different application.
          • This system includes following hardware:
            • High Resolution Ethernet Camera
            • Mega-Pixel Vision Optics
            • High Intensity IR Illumination
            • Industrial PC with high Configuration
            • Sensors
          • The system is having Software for making decision according pre Defined Criteria.
          • We have VISION NPR PLUS software. The software is designed especially for NPR (Number Plate Reading) System.
          • Camera, Optics and Illumination are used mainly for grabbing image of vehicle. Then camera transfers image to the Industrial PC(I-PC).
          • Sensor is used to synchronize vision system with machine.
          • There is software in the I-PC, processes and inspects particular image of the Vehicle and check that inspection criteria are fulfilled or not.
          • As soon as Number on the Plate recognized by camera, the amount of tax/charges is collected from account of vehicle owner through the Banking Transfer system.
          • One camera is placed to take photo of the driver and saves in computer record.
          • The other one camera is placed below road surface for detecting any suspicious material.

          Places Where This Product Is Used
          • At Toll-Tax Plaza
          • For Parking at Airports
          • At Paid-Parking Places
          • For Parking at Multiplexes, Shopping Malls, Public Places etc.
          • For security purpose at Government Organizations.

          Features
          • NPR Vision System is used for automatic collection of tax/charges directly from car owners account through number late reading.
          • It is used to take photo of the drivers for security purpose.
          • Also used to avoid entries of vehicle with suspicious material for security purpose at any Industry, Government Organization, Public Places and Cities etc.
          View Complete Details

          Non Contact Measurement System

          We are offering non contact measurement system.
          non-contact measurement system manufactured, exported and supplied by us is widely used for different purposes. The vision system is used in production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision inspection is completely replacing manual inspection using higher accuracy and higher speed compare to manual inspection.

          applications
          this system is mainly used for quality assurance in automobile industry, electronics industry and automotive industry. The different applications of system includes:-
          • gear inspection in automobile
          • piston assembly inspection in automobile
          • valve assembly inspection in plasticauto parts
          • disk brake inspection
          • injection die inspection
          • pin presenceabsence in electronics chip
          • ball bearing inspection
          • needle bearing inspection
          • roller bearing inspection
          • casting inspection
          • all kind of measurement like linear dimension, angular dimension etc.
          • to verify any pattern of the automotive part
          • presenceabsence of parts in electronicsauto products

            • technical specifications
              • it is totally customized solution according to different application and products.
              • this system includes following hardware :
                • high resolution ethernet camera
                • mega-pixel vision optics
                • high intensity illumination
                • industrial pc with high configuration
                • sensors
                • airpiston based rejection system
                  • the system is having software for making decision according pre defined criteria.
                  • we have vision match-it software. The software is designed especially for automotiveplasticautomobileelectronics industry.
                  • camera, optics and illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the industrial pc(i-pc).
                  • sensor is used to synchronize vision system with machine.
                  • there is software in the i-pc, processes and inspects particular image of the productobject and check that inspection criteria are fulfilled or not.
                  • if product is failed to fulfill pre-defined inspection criteria, software generates rejection signal and transfers that signal to rejection system so that product is rejected and stores values or images in report file which can be rejected.
                  • rejection system may be air based or piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejectssorts particular defective product from production line.

                    • industries where this product is used
                      • electronics product manufacturer
                      • plastic industry
                      • auto parts manufacturer
                      • machine manufacturer for automobile, electronics, automotive industry
                      • automobile parts and assembly manufacturer

                        • features
                          • machine vision system is pc based industrial automation that is used for 100% quality assurance at very high speed.
                          • machine vision system is throughout consistent during the work.
                          • no energy decay.
                          • 24 hours availability without failure
                          • closed loop control with maximum accuracy
                          • plenty of data saving and fetching
                          • high frequency measurement
                          • very law maintenance cost and handling charge
            View Complete Details

            Blister Inspection System

            We are manufacturers, exporters and suppliers of blister inspection system. The vision system is used in production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision inspection is completely replacing manual inspection using higher accuracy and higher speed compare to manual inspection.

            applications
            this system is mainly used for quality assurance in pharmaceutical industry. The different applications of system includes :
            • to check presenceabsence of pills into blister
            • to check pattern or color matching of pills into blister
            • counting of pills
            • sorting pillscapsulestablets based on color inspection

              • technical specifications
                • it is totally customized solution according to different application and products.
                • this system includes following hardware :
                  • high resolution ethernet camera
                  • mega-pixel vision optics
                  • high intensity illumination
                  • industrial pc with high configuration
                  • sensors
                  • airpiston based rejection system
                    • the system is having software for making decision according pre defined criteria.
                    • we have vision detect plus software. The software is designed especially for pilltabletblister inspection.
                    • camera, optics and illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the industrial pc(i-pc)
                    • sensor is used to synchronize vision system with machine.
                    • there is software in the i-pc, processes and inspects particular image of the productobject and check that inspection criteria are fulfilled or not.
                    • if product is failed to fulfill pre-defined inspection criteria, software generates rejection signal and transfers that signal to rejection system so that product is rejected and stores values or images in report file which can be rejected.
                    • rejection system may be air based or piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejectssorts particular defective product from production line.

                        • industries where this product is used
                          • tabletcapsule manufacturer
                          • pills manufacturer
                          • blister packaging machinery manufacturer
                          • blister machine end user

                            • features
                              • machine vision system is pc based industrial automation that is used for 100% quality assurance at very high speed.
                              • machine vision system is throughout consistent during the work.
                              • no energy decay.
                              • 24 hours availability without failure
                              • closed loop control with maximum accuracy
                              • plenty of data saving and fetching
                              • high frequency measurement
                              • very law maintenance cost and handling charge
              View Complete Details

              Blister Inspection System

              We are Manufacturers, Exporters and Suppliers of Blister Inspection System. The Vision System is used in Production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision Inspection is completely replacing manual inspection using higher accuracy and higher speed compare to Manual Inspection.

              Applications
              This system is mainly used for quality assurance in Pharmaceutical Industry. The different applications of system includes :
              • To check presence/Absence of pills into blister
              • To check pattern or color matching of pills into blister
              • Counting of pills
              • Sorting Pills/Capsules/Tablets based on color inspection

              Technical Specifications
              • It is totally customized solution according to different application and products.
              • This system includes following hardware :
                • High Resolution Ethernet Camera
                • Mega-Pixel Vision Optics
                • High Intensity Illumination
                • Industrial PC with high Configuration
                • Sensors
                • Air/Piston based Rejection System
              • The system is having Software for making decision according pre Defined Criteria.
              • We have VISION DETECT PLUS software. The software is designed especially for Pill/Tablet/Blister inspection.
              • Camera, Optics and Illumination are used mainly for grabbing image of moving object on conveyor belt at high speed. Then camera transfers image to the Industrial PC(I-PC)
              • Sensor is used to synchronize vision system with machine.
              • There is software in the I-PC, processes and inspects particular image of the product/object and check that inspection criteria are fulfilled or not.
              • If product is failed to fulfill pre-defined inspection criteria, Software generates Rejection signal and transfers that signal to Rejection system so that product is rejected and stores values or images in report file which can be rejected.
              • Rejection System may be Air based or Piston based, depending upon weight and dimension of product. On receiving rejection signal, rejection system rejects/sorts particular defective product from production line.

              Industries Where This Product Is Used
              • Tablet/Capsule Manufacturer
              • Pills Manufacturer
              • Blister Packaging Machinery Manufacturer
              • Blister Machine End User

              Features
              • Machine Vision System is PC based Industrial Automation that is used for 100% Quality Assurance at very high speed.
              • Machine Vision System is throughout consistent during the work.
              • No energy decay.
              • 24 Hours availability without failure
              • Closed loop control with maximum accuracy
              • Plenty of data saving and fetching
              • High frequency Measurement
              • Very law maintenance cost and handling charge
              View Complete Details

              Machine Vision Industrial

              We are well trusted machine vision industrial pc manufacturers, exporters and suppliers. Full aluminum touch pc is a small and powerful pc system that is suitable for use in harsh work environments. It is distinguished from standard pc systems through silent operation and an increased stability, especially through the robust aluminum housing and by the lack of moving parts.

              applications
              • industrial pc is mainly used as a panel pc. Machine vision system is a pc based camera vision system. I-pc is specially designed for the vision system.
              • it can also be used as a panel pc in machine as it is light weight and compact pc that covers all features of normal pc.

                • technical specifications
                  • operating system : linux ubuntu 9.04 pre-installed,
                  • drivers for windowslinux operating systems included
                  • cpu : intel dual core
                  • chipset : north bridge: intel 945gse;
                  • south bridge : intel ich7m
                  • memory : 1x1gbyte ddr ii sodimm
                  • hard drive : 8gbyte sata ssd hard drive
                  • graphic : gma950 graphics card
                  • audio : realtek alc662,
                  • 5.1 channel high definition audio codec
                  • 2x 2w loudspeaker
                  • network : 1000mbit rj45 ports
                  • usb : 1 usb 2.0 ports,
                  • external connectors : vga d-sub 15-pin, 1xusb 2.0, 1x 25-pin parallel port, 1xrj-45, power onoff, 2x 12v dc-in (1x screw-able)
                  • internal io connectors : 1x mini pci-e(w-lan card with intel 4965 chip integrated)
                  • 1x front panel audio header(used for loudspeaker)4x usb 2.0 header, 3x comrs232 header
                  • com1, com2 used as external connectors
                  • com2 switchable between rs232rs485 via jumper jp3, 1x front panel header
                  • input voltage : 12v dc-in
                  • operating temperature : 0o to +60o
                  • driver : windows, linux; linux ubuntu 9.04 preinstalled

                    • industries where this product is used
                      • this product can be used in each and every kind of industry where compact size of pc required.
                      • all kind of machine manufacturer
                      • specially designed for machine vision system

                        • features
                          • mvp-121 I pc is throughout consistent during the work.
                          • full touch screen operation so no need to use other input devices (i.e. Mouse & key board)
                          • industrial pcs are dedicated for particular application so safe to operate and work on consistently.
                          • very law maintenance cost and handling charge.
                View Complete Details

                Machine Vision Optics

                We are offering machine vision optics. Our organization is highly acknowledged among the clients for offering a wide array of excellent qualitymachine vision lens. These lenses are manufactured by our professionals using high quality raw material in compliance with the industry laid standards & norms.
                features:

                • consistent performance during application

                • high accuracy measurement

                • important for clear image capture

                • very low maintenance cost and handling charge"


                  • focal length: 6mm, 8mm, 12mm, 16mm, 25mm, 35mm, 50mm and more.
                View Complete Details

                Machine Vision Lights

                We are offering machine vision lights.
                machine vision lights. The vision system is used in production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision inspection is completely replacing manual inspection using higher accuracy and higher speed compare to manual inspection.

                applications
                • the lights are also compulsory part in vision inspection system.
                • in industries where continuous high speed production, such lightings are used.
                • for high speed inspection it is obvious to use high intensity lights.

                  • technical specifications
                    there are wide range of different types of illumination (lights) is available. Here we are describing 128 led bar light specification.
                    • operating voltage : 2412 volt dc @ 20 ma
                    • power rating : 2.5 watt per led
                    • temperature : 0oc to 40oc
                    • dimension length : 145mm; width: 85mm; height: 36mm
                    • lifecycle : 60, 000 hrs
                    • weight : 480 gms
                    • number of led : 128

                      • industries where this product is used
                        • machine vision industry
                        • microscopes manufacturer
                        • industrial automation
                        • pc based automation

                          • features
                            • high intensity light is used for 100% quality assurance at very high speed.
                            • machine vision illumination is throughout consistent during the work.
                            • for the application of sharp and high accuracy measurement very high intensity lights (red led) are used.
                            • for uncertain surface inspection there are many different techniques are used while lighting.
                            • indirect lighting is also used for special applications.
                            • high frequency measurement.
                            • very law maintenance cost and handling charge.
                  View Complete Details

                  Machine Vision Lights

                  Avail from us high quality Machine Vision Lights. The Vision System is used in Production line for the 100% quality assurance. It inspects for visible defect in the product at high speed. Vision Inspection is completely replacing Manual inspection using higher accuracy and higher speed compare to Manual Inspection.

                  Applications
                  • The lights are also compulsory part in vision inspection system.
                  • In industries where continuous high speed production, such lightings are used.
                  • For high speed inspection it is obvious to use high intensity lights.

                  Technical Specifications
                  There are wide range of different types of illumination (Lights) is available. Here we are describing 128 LED Bar light specification.
                  • Operating Voltage : 24/12 Volt DC @ 20 mA
                  • Power Rating : 2.5 Watt per LED
                  • Temperature : 0oC to 40oC
                  • Dimension Length : 145mm; Width: 85mm; Height: 36mm
                  • Lifecycle : 60, 000 hrs
                  • Weight : 480 Gms
                  • Number of LED : 128

                  Industries Where This Product Is Used
                  • Machine Vision Industry
                  • Microscopes Manufacturer
                  • Industrial Automation
                  • PC based Automation

                  Features
                  • High intensity light is used for 100% Quality Assurance at very high speed.
                  • Machine Vision Illumination is throughout consistent during the work.
                  • For the application of sharp and high accuracy measurement very high intensity lights (Red LED) are used.
                  • For uncertain surface inspection there are many different techniques are used while lighting.
                  • Indirect lighting is also used for special applications.
                  • High frequency Measurement.
                  • Very law maintenance cost and handling charge.
                  View Complete Details

                  Barcode Inspection

                  We offer barcode inspection. To check barcode inspection on label and cartona and any other surface
                  View Complete Details

                  Machine Vision System

                  We offer machine vision system. Industrial camera based vision inspection system
                  View Complete Details
                  Tell Us What are you looking for? Will call you back

                  Contact Us

                  • Mr. Bhavesh Gohil (Acrifab Private Limited)
                  • Survey No.832/1, Kothari X Road, Rakanpur-Santej Road, Ahmedabad, Gujarat - 382721, India
                  • http://www.iiot-india.com
                  • Share us via
                  • Call 08069247352 Ext. 285