Advance Chemicals Ghaziabad, Uttar Pradesh

• MOQ 50 Kilogram
• Country of OriginIndia
• ApplicationAnti-foaming
• Purity15% Silicone
• Viscosity5000-10000
• AppearanceWhite viscous liquid
• pH6.5-7.5
• Solubilitysoluble in 125ppm water
• Shelf life6 months

The silicone based defoamers are polymers with silicone backbones. These are heavy duty defoamers and are good at both knocking down surface foam and releasing entrained air.They are powerful defoaming and anti-foaming agent for any process industry like paper, textile, sugar etc having strong spreading power, safe and economical in use.

• AppearanceWhite non-transparent viscous liquid
• IonicityCationic
• Charge densityHigh
• pH4-5
• Viscosity5000- 6000 cps
• Solid (%)17-18
• Shelf Life6 months

The Dry Strength Resin (DSR) is an acrylamide based product used to increase the strength per unit of bonded area between fibres in any sheet of paper. It achieves the desired strength while maintaining other parameters like dewatering rates etc

• MOQ 50 Kilogram
• AppearanceWhite transparent liquid
• pH4
• Viscosity5000-6000 cps
• IonicityCationic
• Shelf Life6 months

This product is used to improve bursting factor in kraft paper by 2.0. The dosing point is size press alongwith starch and sizing chemical. Tentative dosing of the product is 3 kg per ton of paper to gain 2.0 BF in GSM 100-140. It also improves the anti-cracking properties of paper due to over usage of starch.

• MOQ 50 Kilogram
• AppearanceBrownish emulsion
• pH Value3.5-4.5
• Solids (%)32
• IonicityCationic
• Specific gravity1.15
• Shelf Life6 months

The surface sizing agent is a styrene-acrylic emulsion used for surface sizing of paper in size press along with starch and other additives. It improves surface properties of paper at the same time reducing cost and improve efficiency.

• MOQ 25 Kilogram
• Physical formWhite granules
• ColorWhite to off white powder
• IonicityCationic
• Charge densitymedium (30-35%)
• Molecular weightHigh (8-10 million)
• Viscosity @ 0.1%> 40 cps
• pH of 0.5% solution5-7

They are low molecular weight and medium cationic charge polymeric material which helps to increase retention and drainage on the wire section of paper machine. Increasing fines and filler retention helps in reducing effulent load in addition to increasing fibre yield.

• MOQ 50 Kilogram
• Country of OriginIndia
• ColorWhite transparent liquid
• IonicityHighly cationic
• pH4
• Solids (%)50
• Shelf Life6 months

The drainage aids are high charge cationic polymers use to improve the rate at which water is released from a wet paper web. This is done by retaining fines onto the surface of long fibres thereby creating most streamlined path for water to flow past them.