Other Products / Services #1255128

Reports ContainPeak load, Break load, Yield Load, Elongation @Peak load, Elongation @break load, Elongation @yield load, Tensile Strength @peak load, Tensile strength @break load, % elongation @peak load, % elongation @break load, % elongation @yield load, Young’s modulus, Load Vs Elongation graph.

Accessories

• Test tube & rubber corks 6 nos. each.
• Sample Bending tool: 01 No,
• Sample Transferring tool: 01 No.
• “C” Channel: 06 No’s
• Aluminium foil: 1 No each.
• Sample Cutting Die: 1 No Each

ApplicationsIn polymer pipe pressure testing

Salt water spray tester is used for testing rust-proof treatment of material, such as metal surface that after painting, coating, electro-plating, anodizing, films of organic and non-organic.etc. It's a corrosion and Rust-Resistant test.
This test equipment is for checking the corrosion resistant of products (specimen) under long time corrosion after treatment like anodize, rustproof oil, chemical, etc.

The apparatus will consist will consist of an oscillating pipe of stainless steel 304, formed in to semi-circle having radius of 900mm
The pipe will be oscillated so as to describe an angle of 60 deg and 90 deg max up to 150 deg. C from vertical line in both the direction. The duration will be about 2 to 4 seconds. The pipe will be provided with holes of 0.4mm dia at a pitch of 50mm. The pipe will be provided with end connections which will be mounted on suitable two horizontal pipes with coupling to circulate the water in the semi circular tube.
The driver will be through geared motor.
The pump with by-pass valve will be provided suitable to be used for both rain proof apparatus as well as jet proof apparatus as per IPX6.
A panel will be provided with gauge to indicate the water pressure.
Timer will be provided of 0 to 30 minutes to set spray time and ON/OFF switch also will be provided.

Applications

• In Plastic Industry/Polymer Industry
• In Rubber Industry
• In Textile Industry
• In Packaging Industry
• In Pharmaceutical Industry
• In Electronic Industry
• In Engineering Industry
• In Automobile & Aerospace Industry

Specifications

• It is designed to carry a load of 140 kg. The apparatus consists of a motor fitted with a Variable pitch pulley housed in a cabinet.
• The vibrations are imparted by means of off-balance masses rotating on a shaft of a Vibrator clamped to the underside of the table top.
• The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from Walking off the table during vibration.
• A cross arm adjustable on a vertical rod at the center of The table is provided to hold the moulds while operating the table.
• The variable pitch pulley arrangement permits the frequency to be varied sleeplessly Between a maximum of 1400 vibrations per minute.
• Digital Frequency Indicator + controller with resolution of 1 Hz
• Digital indicator for amplitude measurement.
• Electric Supply of 440 volts, 3 phase, 50 Hz
• Vibrating Tables of table top size 50cm x 50cm as well as 1000cm x 100cm are also available. (OR as per customer’s choice.)

Capacity 200 gramsResolution 1mg0.01mgAccuracy: +- 0.010.001No manual calculation requiresDirect result on display.Supply: 230 VAC50 HzComputerised Version available.

Advance Equipments is a well-known Service Provider for Material Testing Equipments in polymers. Our Retrofitting Services are of unmatched quality as we have a separate service personnel, which is expert and dexterous, and truly understands the importance of client satisfaction. Moreover, we sincerely understand the importance of time and therefore, our service personnel is trained to provide highly efficient services on timely basis. In addition, we not only provide services only for our brand but also for other brand equipments and machines. We Can do Retrofitting Services For The Following Machines :

• Tensile Machines
• VSP/HDT Tester
• Hydrostatic Pressure Testing Panel
• Hot/Cold Baths Hydrostatic Pressure Testing
• Pipe Impact Tester
• Torque Tester
• MFI Tester
• ESCR Apparatus
• IZOD/CARPY Tester
• Carbon Contain Tester
• Oxidation Induction Time Tester(OIT)
• Opacity Tester
• Static and Kinetic Friction Tester(COF Tester)
• DART Tester
• Density Testers Digital
• Hot Air Oven
• Muffle-Furnace
• Humidity Chamber
• Cold Chamber
• Zero Degree Chamber
• Sample Cutting Dies
• Sealing Machine

We are one of the renowned Service Providers for a range of Material Testing Equipments in Polymers. Since our service personnel is well-trained and frequently exposed to latest machinery and advanced technologies, we proclaim that our Calibration Services are of unmatched quality. Because of the efforts our service personnel puts in solving our customers problems on timely basis, we are now globally recognized as trustworthy and reliable Service Providers. Additionally, we do these services for any brand. We can do Calibration Services for these machines :

• Tensile Machines
• VSP/HDT Tester
• Hydrostatic Pressure Testing Panel
• Hot/Cold Baths Hydrostatic Pressure Testing
• Pipe Impact Tester
• Torque Tester
• MFI Tester
• ESCR Apparatus
• Carbon Contain Tester
• Oxidation Induction Time Tester(OIT)
• Opacity Tester
• Static and Kinetic Friction Tester(COF Tester)
• DART Tester
• Density Testers Digital
• Hot Air Oven
• Muffle-Furnace
• Humidity Chamber
• Cold Chamber
• Zero Degree Chamber
• Sealing Machine

Advance Equipments is a well-known Service Provider for Material Testing Equipments in polymers. Our Retrofitting Services are of unmatched quality as we have a separate service personnel, which is expert and dexterous, and truly understands the importance of client satisfaction. Moreover, we sincerely understand the importance of time and therefore, our service personnel is trained to provide highly efficient services on timely basis. In addition, we not only provide services only for our brand but also for other brand equipments and machines. We Can do Retrofitting Services For The Following Machines :

• Tensile Machines
• VSP/HDT Tester
• Hydrostatic Pressure Testing Panel
• Hot/Cold Baths Hydrostatic Pressure Testing
• Pipe Impact Tester
• Torque Tester
• MFI Tester
• ESCR Apparatus
• IZOD/CARPY Tester
• Carbon Contain Tester
• Oxidation Induction Time Tester(OIT)
• Opacity Tester
• Static and Kinetic Friction Tester(COF Tester)
• DART Tester
• Density Testers Digital
• Hot Air Oven
• Muffle-Furnace
• Humidity Chamber
• Cold Chamber
• Zero Degree Chamber
• Sample Cutting Dies
• Sealing Machine

We are one of the renowned Service Providers for a range of Material Testing Equipments in Polymers. Since our service personnel is well-trained and frequently exposed to latest machinery and advanced technologies, we proclaim that our Calibration Services are of unmatched quality. Because of the efforts our service personnel puts in solving our customers problems on timely basis, we are now globally recognized as trustworthy and reliable Service Providers. Additionally, we do these services for any brand. We can do Calibration Services for these machines :

• Tensile Machines
• VSP/HDT Tester
• Hydrostatic Pressure Testing Panel
• Hot/Cold Baths Hydrostatic Pressure Testing
• Pipe Impact Tester
• Torque Tester
• MFI Tester
• ESCR Apparatus
• Carbon Contain Tester
• Oxidation Induction Time Tester(OIT)
• Opacity Tester
• Static and Kinetic Friction Tester(COF Tester)
• DART Tester
• Density Testers Digital
• Hot Air Oven
• Muffle-Furnace
• Humidity Chamber
• Cold Chamber
• Zero Degree Chamber
• Sealing Machine