• STICKER (P) is efficient for liquidation of fires of class A, B, C & E and is intended for the protection of electric sockets. 
• Does not require servicing. 
• To be used to protect against inflammation of any small-sized electric devices, such as electric sockets, switches, junction boxes, closed elements of lighting fixtures, relay cases, electric motor connection boxes etc. . 
• Operating temperature :120C, Ambient temperature: –50 to +80C. 

The defence personal & fire fighter during the training in the containers are confronted with real flames, extreme heat, high humidity, severely restricted visibility, and thick smoke. This allows them to train for an emergency as realistically as possible

• All range of fire extinguisher portable & trolley mounted
• BIS licence holder for portable fire extinguisher  (ABC TYPE, CO2 TYPE, WATER TYPE, FOAM TYPE). 
• ISI marked  fire fighting accessories such as fire man axe, Fire bucket, Beater, Fire hook, stand etc

Extinguishing agents are kept under pressure in the cylinders using compressed air, gas or chemicals that produce gas when initiated by suitable means. Once the safety lock is removed and the trigger or handle is squeezed, the contents come out through the extinguisher's nozzle at high pressure.(Used to control fire at initial level)

Features:

• As per EN 3-7:2007-10 & EN 137.
• Corrosion Free Stainless Steel (304 Grade).
• PESO approved Air Cylinder . 
• Facemask as per EN 136 Class 3 / IS 14166 
• Lancing distance up to 14m in jet & 6m in spray. 
• Discharge time minimum 22 sec for Water 
• Fire rating up to 55A &233B.
• Dielectric suitable up to 1000V.
• Safe working duration for breathing system up to 30 min with 4.7x300 bar air cylinder. 
• Backplate design universal 
• Total weight(Filled system) less than 35 kg

Details:

• Material/Fabric shall be inherent flame resistance colour Royal navy blue make karmal/nomax certified from CE as per EN standard 11612
• Stitching also certified as per CE standard.
• 2 radium layers on each sleeve, one radium layer on waist, one layer below knee on each side or customized
• Elastic at the leg end(Jogger) or as required.
• 02 pocket on chest with flap, pockets on thigh each side, pocket on each side of knee or as required.
• Branded chain or as specified.

MICRO-ENVIRONMENTS

Critical Volume, Compartment, or Cabinet less than 300 Cubic Feet.

MICRO-AREA

Critical surface area for local application fire suppression less than 100 square feet

• CLEAN AGENTS: 300 ft3
• CARBON DIOXIDE: 725 ft3
• DRY CHEMICALS: 1500 ft3

Features:

• Extinguishes inflammation sources at early stages of fire, prevents distribution of fire beyond limits of a protected space.
• Excludes repeated ignition in the protected space for up to 30 minutes, thanks to the effect of phlegmatization.
• Discharges the fire retardant agent directly into the inflammation area, without increasing the concentration of hazardous substances in the air outside of the protected space.
• Simple and reliable in operation, easily integrates with standard systems of fire alarm and automatic fire suppression.

Construction                    

 Vessel for Water & AFFF(CAF)Stainless Steel Grade 304 

Capacity-550L &  expandable up to 1000 L

Operation Method-                    

Air Pressurized Cylinders  - 

Motor driven/Petrol/Electrical Store Pressure

Trolley Construction-   MOC-SS 304 Grade/MS  WHEEL-Solid rubber

Discharge hose with gun-  Length(Std)-30mx1 nos.

Dimensions(*Customized*):  As per client requirement

• STICKER (P) is efficient for liquidation of fires of class A, B, C & E and is intended for the protection of electric sockets. 
• Does not require servicing. 
• To be used to protect against inflammation of any small-sized electric devices, such as electric sockets, switches, junction boxes, closed elements of lighting fixtures, relay cases, electric motor connection boxes etc. . 
• Operating temperature :120C, Ambient temperature: –50 to +80C. 

The defence personal & fire fighter during the training in the containers are confronted with real flames, extreme heat, high humidity, severely restricted visibility, and thick smoke. This allows them to train for an emergency as realistically as possible

• All range of fire extinguisher portable & trolley mounted
• BIS licence holder for portable fire extinguisher  (ABC TYPE, CO2 TYPE, WATER TYPE, FOAM TYPE). 
• ISI marked  fire fighting accessories such as fire man axe, Fire bucket, Beater, Fire hook, stand etc

Extinguishing agents are kept under pressure in the cylinders using compressed air, gas or chemicals that produce gas when initiated by suitable means. Once the safety lock is removed and the trigger or handle is squeezed, the contents come out through the extinguisher's nozzle at high pressure.(Used to control fire at initial level)

Features:

• As per EN 3-7:2007-10 & EN 137.
• Corrosion Free Stainless Steel (304 Grade).
• PESO approved Air Cylinder . 
• Facemask as per EN 136 Class 3 / IS 14166 
• Lancing distance up to 14m in jet & 6m in spray. 
• Discharge time minimum 22 sec for Water 
• Fire rating up to 55A &233B.
• Dielectric suitable up to 1000V.
• Safe working duration for breathing system up to 30 min with 4.7x300 bar air cylinder. 
• Backplate design universal 
• Total weight(Filled system) less than 35 kg

Details:

• Material/Fabric shall be inherent flame resistance colour Royal navy blue make karmal/nomax certified from CE as per EN standard 11612
• Stitching also certified as per CE standard.
• 2 radium layers on each sleeve, one radium layer on waist, one layer below knee on each side or customized
• Elastic at the leg end(Jogger) or as required.
• 02 pocket on chest with flap, pockets on thigh each side, pocket on each side of knee or as required.
• Branded chain or as specified.

MICRO-ENVIRONMENTS

Critical Volume, Compartment, or Cabinet less than 300 Cubic Feet.

MICRO-AREA

Critical surface area for local application fire suppression less than 100 square feet

• CLEAN AGENTS: 300 ft3
• CARBON DIOXIDE: 725 ft3
• DRY CHEMICALS: 1500 ft3

Features:

• Extinguishes inflammation sources at early stages of fire, prevents distribution of fire beyond limits of a protected space.
• Excludes repeated ignition in the protected space for up to 30 minutes, thanks to the effect of phlegmatization.
• Discharges the fire retardant agent directly into the inflammation area, without increasing the concentration of hazardous substances in the air outside of the protected space.
• Simple and reliable in operation, easily integrates with standard systems of fire alarm and automatic fire suppression.

Construction                    

 Vessel for Water & AFFF(CAF)Stainless Steel Grade 304 

Capacity-550L &  expandable up to 1000 L

Operation Method-                    

Air Pressurized Cylinders  - 

Motor driven/Petrol/Electrical Store Pressure

Trolley Construction-   MOC-SS 304 Grade/MS  WHEEL-Solid rubber

Discharge hose with gun-  Length(Std)-30mx1 nos.

Dimensions(*Customized*):  As per client requirement