Advanced Industrial Micro Systems

Goregaon, Mumbai, Maharashtra

Portable Non-Contact Ink Jet Pen Model IJP SpeediJet 798(REINER Germany), which is a Zero Maintenance, 300 dpi high resolution, Battery Powered ONE line (character height 3.2 mm) Printer & can be used on any Porous products to print B.No., Exp.Date, Time, Serial No. (AGMARK), etc. on labels, cartons, etc. It is fully programmable through the computer where it can print 1 line of Data at a very low price. This printer is a totally mobile Solution for Time Date Numbering, uses such as; Parts Marking, Package Marking and validating in surgeries, pharmacies, and hospitals, marking dockets and packages in transit, quality control validation, laboratory timing and checking, production controls, delicate product marking, nightclub and meetings entry validation, etc.

The system is inclusive of below mentioned accessories worth Rs. 25, 000/- free of cost:

a. 2 Nos. AA Rechargeable Batteries, Computer Software, USB Data Transfer Cable.

b. 1 No. disposable Pre-mix Black ink cartridge, Cartridge cleaning Wipe.

c. Operator Tool Kit, Operation & User Manual, Configuration Software on CD

This printer is fully Electronic without CORE system & does not have any air pump, viscosity control unit, filters, etc. & so there is no maintenance required (No AMC). It does not require separate make up or wash solution as everything is included in the disposable ink cartridges making it very user friendly for the Operator. The running / Printing cost is only about 4 Paise per impression (25 char).

Portable Non-Contact Ink Jet Stamp Model IJP Jetstamp Graphic 970-MP (REINER Germany), which is a Zero Maintenance, 300 dpi high resolution, Battery Powered SIX line (character height 1 to 12.7 mm) Printer & can be used on Porous / Non-Porous products to print B.No., Exp.Date, Time, Serial No. (AGMARK), Logos, Scannable Variable Bar Codes, etc. on labels, cartons, pouches, drums, containers, etc. It is fully programmable through the computer where it can print 6 lines Data at a very low price. This printer is a totally mobile Solution for Time Date Numbering, Barcodes and Graphicsuses such as; Parts Marking, Package Marking and validating in surgeries, pharmacies, and hospitals, marking dockets and packages in transit, quality control validation, laboratory timing and checking, production controls, delicate product marking, nightclub and meetings entry validation, etc.

Large Character Colored Touch Screen On-Line Non-Contact Ink Jet Printer Model PRODIGIT PD53 (Maplejet-Canada), which is a Zero Maintenance, high resolution, SIXTEEN line (character height 1 to 53 mm) English / Arabic printer. It has Stainless Steel construction & can be installed on Porous & Non-Porous production line to print B.No., Mfg.Date, Exp.Date, MRP , Time, Serial No. (AGMARK), High Quality Logos, Hindi / Local Language also with option of 90 traverse print on bottles, pouches, labels, cartons, Pipes, etc. It is a High Speed printer & has a large Colored WYSIWYG Touch Screen Display for setting all parameters & can accept data from computer via. USB / Wi-Fi connection. It is also capable of accepting variable / random data from Excel sheets or from external on-line sources like Weighing Scales, PLCs, etc. It can print variable High Resolution, Scannable 1D / 2D (Datamatrix / QR) Barcodes with changing/serial numbers as required for Primary / Secondary & Tertiary Packaging in the Pharmaceutical Industry. It also has the provision of connecting up to TWO 53 mm Proton Print-Heads simultaneously with different data from each head or for a large 106 mm (4.3) height print

Machine Mounting Pneumatic Hot Foil Coder Model HFC 30 OP, for on-line registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. The 3 to 4 line message (of 15 character in each line) to be printed is easily composed by pushing the Brass Stereos into the grooves & tightening them for speeds upto 150 impressions per minute. The inking is in the form of Foil ribbon, which passes below the stereos & is advanced automatically after each print. The brass stereos are heated to a temperature of around 150 deg. C & hit the film onto the substrate thus transferring the print with embossing which has no drying time and is better quality than pre-printed quality. (Free accessories include 2 mm Numeric Brass Character Set, Hot Foil Ribbon & Print Sensor). This Coder is suitable for intermittent motion FFS / Packaging Machine eg. for Milk & Oil Packaging.

Fully Automatic PLC based On-line Hot Roll Rotary Coder Model HRC-35-O with blue Digital LCD display, soft touch keys & production counter. This coder (equivalent to MARKEM coders) uses instant dry hot wax ink roller and heated brass stereos for smudge free printing of 4 to 6 lines of size 35 X 50 mm & speed upto 300 packets per min. Instantaneous speed feedback is obtained by Digital Encoder for synchronization. (Free accessories include 2 mm Brass type Numeric Character Set, Hot Wax Ink Cartridge & Print Sensor). This type of coder is suited for continuous & intermittent FFS (Form Fill Seal) machines, pouch packing / flow wrapping / blister pack machines, biscuit / masala / oil / milk / water packing, conveyor systems, winder-rewinder system, etc.

Electro Pneumatic Coder print head Model EPC 35 O for registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. The stereos used are grooved type which can be easily replaced daily on site. The maximum size of printing is 4 to 6 lines of total area 35X35 mm. Quality Pneumatic accessories ensure reliability, long life & speeds upto 150 impressions per minute. (Free accessories include Lit. Ink, Lit. Solvent, 2.5 mm Grooved Rubber Character Set & Ink Cartridge). This Coder is suitable for intermittent motion FFS / Packaging Machine eg. for Milk & Oil Packaging.

Open Blade Motorized Pad Printing Machine Model PPM 520K is an automated replacement for Screen Printing & is used for very high quality printing of size up to 3 X 3 for LOGOs, manufacturing date, ingredients, bar code, issues, etc. on industrial products of food, cans, beverage, cosmetics, electric apparatus, pharmacy, etc. It can print on any flat, curved or uneven surface on metal, plastics, glass, ceramic, nylon etc. at speed upto 2000 strokes per hour. It uses a flat metal etched plate which carries the image, thick liquid paste ink which is cleared with an open blade & a soft silicon rubber pad which picks up the image from the plate & transfers it on to the substrate. (Free accessories include small Silicon Pad & Metal Plate). This coder is suitable for printing LOGOs & fixed information on small jars, glass, foil, tins, bottles (curvature), etc. Multiple machines can be used for multiple colors.

Closed Cup Motorized Pad Printing Machine Model PPM 520C is an automated replacement for Screen Printing & is used for very high quality printing of size up to 2 X 2 for LOGOs, manufacturing date, ingredients, bar code, issues, etc. on industrial products of food, cans, beverage, cosmetics, electric apparatus, pharmacy, etc. It can print on any flat, curved or uneven surface on metal, plastics, glass, ceramic, nylon etc. at speed upto 2000 strokes per hour. It uses a flat metal etched plate which carries the image, thick liquid paste ink which is cleared with a closed cup scraper & a soft silicon rubber pad which picks up the image from the plate & transfers it on to the substrate. (Free accessories include small Silicon Pad & Metal Plate). This coder is suitable for printing LOGOs & fixed information on small jars, glass, foil, tins, bottles (curvature), etc. Multiple machines can be used for multiple colors.

High Speed Stacking Label Coder Model SLC 200 A for registered high quality multi-line overprinting of B.No., Mfg. Date, Exp. Date, MRP `, etc. on labels of size 40 X 20 mm to 200 X 150 mm. The labels are stacked on the slanting tray (Dispenser) for feeding, automatically picked up one-by-one by the pick-up rubber, fed to the printing roller via guide track and timing chain & stacked back in the collection tray automatically at speeds up to 250 per minute. (Free accessories include Kg. Paste Ink, 1 Lit. Solvent & 2 mm Flat Rubber Character Set). This Coder is widely used in the Pharmaceutical & Food Industries for printing large quantities of labels.

Tray Wrapping machine Model TWM-450 is useful for wrapping transparent cellophane type PVC stretch film on open trays of snacks & packets. This type of transparent packing makes the product look attractive as well as increases the shelf life. The contact parts are made of SS & it is equipped with a roller to mount the Film Roll, a cutter to cut the film to size as per the tray dimensions & a heater pad to seal the film under the tray, once it is stretched & wrapped. It is used on department check-out counters, for packing Fruits, Vegetables, Seafood, Sweets, etc. in trays.

Stretch Wrapping machine Model SWM-2100 is fully automatic & can operate continuously under severe industrial conditions. This kind of setup not only allows it to work as a conventional stretch wrapper but also as a top bander or semi-automatic stretch wrap machine if required.

Skin Packaging Machine Model PSP-390 is a new pattern commodity packing technique. No need for moulding mould. Skin Packing can prolong storage life and strength. It can be used for hardware, spare parts, medicine equipment, electric component, toy, stationery, dishware and craft products etc. We offer one of the best quality skin packing machine and automatic skin packing machine as well.

Blister Packaging Machine Model BPM-500 has been widely used for the package of hardwares, toys, daily used articles and electrical elements. The commodity packed is featured as transparent, damp proof, dustproof, secure and pleasing to eye.

Low Semi Automatic Carton Strapping Machine Model CSM-560-NA is suitable for strapping cartons, packages, wood boxes, etc. of various heights very quickly without the need for bothersome strapping tools & metal seals using polyethylene plastic band which tightens, heat-seals & gets cut automatically. Tension can be easily adjusted by a simple knurled nut. This sealer is suitable for strapping of Corrugated Cartons, boxes, etc.

Multi-Functional Plastic / Metal Cap Locking & (ROPP) Capping Machine Model LCM-50D for automatically fixing the caps onto PET or Glass type bottles. The cap gets sealed & when twisted, opens with a snap & leaves a separate ring at the bottom. It is used for locking of plastic or ROPP metal caps on beverage & pharmaceutical bottles. Available in Paddle & Semi Automatic Model. Customized in Standard & GMP Model.

Tube Crimping Machine for crimping of Aluminium & Collapsible Tubes with BNo, ExpDt, etc. embossing available. Speeds upto 30 tubes per minute is obtainable.

Fully Automatic Multi-purpose Sealing Machine Model AMS-100A for sealing cups, trays, containers, etc. The container automatically travels inside the machine where the lid is cut & sealed over it from the roll & the sealed container then comes out with automatic advancement of sealing film. This is Ideal for Mineral Water, Shrikhand, Carry-Out Bowl products, Soups, Sweets & Hotel Lunch Packing of Glasses, trays, etc.

Semi Automatic Cup Sealer for sealing glasses / cups made of EPS, PS, PP, etc. of beverages, soup, water, etc. The container is pushed inside the machine where the lid is cut & sealed over it from the roll & the sealed container is then pulled out with automatic advancement of sealing film. This is Ideal for Mineral Water, Shrikhand, Carry-Out Bowl products, Soups, Jelly, Pudding, etc.

Manual Roll Type Lunch Cup Sealer Model LTS-200A for sealing glasses / cups made of EPS, PS, PP, etc. of beverages, soup, water, etc. The container is put inside the machine where the lid is cut & sealed over it from the roll & the sealed container is then pulled out. The sealing film is manually advanced after sealing. This is Ideal for Mineral Water, Shrikhand, Carry-Out Bowl products, Soups, Jelly, Pudding, etc.

Thermal Shrink Packing Tunnel Model SPT-4525 of size 10 X 18 where the product is put into the PVC / POF / PP shrink sleeve & passed through the tunnel, the conveyor moves the product through the heat chamber with fan for uniform heating, and the finished, sealed product comes out from the other side giving skintight transparent packing that is tamper proof & has to be torn to use product. This sealer is suitable for shrinking gifts, mineral water, bottles, cosmetics, etc.

Machine Mounting Pneumatic Hot Foil Coder Model HFC 30 OP, for on-line registered printing of B.No., Mfg.Dt., Exp.Dt., M.R.P. `, etc. The 3 to 4 line message (of 15 character in each line) to be printed is easily composed by pushing the Brass Stereos into the grooves & tightening them for speeds upto 150 impressions per minute. The inking is in the form of Foil ribbon, which passes below the stereos & is advanced automatically after each print. The brass stereos are heated to a temperature of around 150 deg. C & hit the film onto the substrate thus transferring the print with embossing which has no drying time and is better quality than pre-printed quality. (Free accessories include 2 mm Numeric Brass Character Set, Hot Foil Ribbon & Print Sensor).

Hand Held Pipe Coder Model PPC 35 M is a compact, Manual printer for 1 to 4 lines printing of ISI mark, Company Name, Logos, Batch No., etc. on all types of rigid or soft type PVC Polyethylene HDPE PV pipes & tubes, etc. of diameter 20 mm to 400 mm. The message to be printed is very easily composed by just sticking the low-cost rubber nylon stereos (easily changeable) on to the print wheel. The inking is in the form of rechargeable cartridge, so color of printing can be changed easily by changing cartridge. (Free accessories include 1 Lit. Blue Ink, 1 Lit. Solvent, 6 mm Flat Rubber Character Set, Double Sided Tape & Ink Cartridge). These coders are ideal for Manual Hand Held Printing on various types of tubes & pipes after extrusion process.

We offer motorized pad printing machine. Pad printing technologypad printing is an indirect method of printing, a combination of offset & gravure printing process. Plate system is like gravure & printing system is like offset. In gravure printing, design is etched on a roller whereas in pad printing, flat plate carries an image. A rubber blanket, in offset process, picks up image from the plate & transfers it on the substrate. Similarly a solid mass of rubber called pad, picks up ink from the etched plate & prints on the substrate hence the process is known as pad printing. theory of pad printing: the ink is spread over the plate to fill up the image on it. Doctor blade or ink cup cleans the plate leaving ink in the etched portion only. The upper surface of the ink film is exposed to air. The silicone rubber pad comes down & presses on the image area on the plate & goes up with the ink film on it. The pad now moves over to the object to be printed & again moves down onto the object to transfer the print image onto the object. because the pads are very soft, they are able to take the shape of the product & so pad printing is possible on irregular surfaces, uneven surfaces & flat surfaces with the same ease & clarity. today, pad printing is used successfully both in the field of high quality decoration and in the field of labeling and marking. Due to the versatile use and the development of this technology, it has gained great importance and developed into a universally recognized printing process.