We are offering kaplan turbine test rig.kaplan turbine test rig is designed by us to check the operation, efficiency and power output of a kaplan turbine. The turbine is an axial flow reaction turbine named in honor of dr. B. Kaplan, a german engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to qh. As the head (h) decreases the j discharge (q) must increase to produce the same power. the set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of centrifugal pump. The runner is directly mounted on one end of a central ss shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine. objectives

• to study the operation of kaplan turbine.
• to determine the output power of kaplan turbine.
• to determine the turbine efficiency.

• water supply & drain.
• electricity 20 kw, 440v ac, three phase.
• floor area 1.5x0.75 m.

We are offering kaplan turbine test rig.kaplan turbine test rig is designed by us to check the operation, efficiency and power output of a kaplan turbine. The turbine is an axial flow reaction turbine named in honor of dr. B. Kaplan, a german engineer. This turbine is suitable for low head. The power produced by a turbine is proportional to qh. As the head (h) decreases the j discharge (q) must increase to produce the same power. the set-up consists of a scroll casing housing a runner. Water enters the turbine through the stationary guide vanes and passes through the runner axially. The runner has a hub and airfoil vanes, which are mounted on it. The water is fed to the turbine by means of centrifugal pump. The runner is directly mounted on one end of a central ss shaft and other end is connected to a brake arrangement. A transparent hollow cylinder made of acrylic is fitted in between the draft tube and the casing for observation of flow. Load is applied to the turbine with the help of rope brake arrangement so that the efficiency of the turbine can be calculated. The set-up is supplied with control panel. A draft tube is fitted on the outlet of the turbine. The set-up is complete with guide mechanism. Pressure and vacuum gauges are fitted at the inlet and outlet of the turbine to measure the total supply head on the turbine. objectives

• to study the operation of kaplan turbine.
• to determine the output power of kaplan turbine.
• to determine the turbine efficiency.

• water supply & drain.
• electricity 20 kw, 440v ac, three phase.
• floor area 1.5x0.75 m.