Baili formwork and scaffolding

Sharjah, United Arab Emirates

Cup-lock Scaffolding is a temporary structure used to support a slab, work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other manmade structures. Cup-lock is a fully galvanized or painted multi-purpose steel scaffold system suitable for providing general access and supporting vertical loads. All vertical standards and ledgers tubes are 48.3mm diameter with 3.00 or 3.20 mm thickness. Cup-lock is the world’s most widely used system scaffold. Cup-lock’s key feature is its unique circular node point which allows up to 4 horizontals to be connected to a vertical in a single fastening action-making it probably the fastest and safest system available.

Cantilever Bracket CB240 is an economic, durable and easy to use system that provides a safe and versatile solution to climbing vertical shuttering support and protected working area that is ideal for high structures with successive lifts. Due to its high level of flexibility and adaptability, the CB 240 system can be used in almost any situation where a vertical formwork or edge protection system is required. It can be used in conjunction with a self-climbing system or anchored directly to the existing structure. It is compatible with a wide variety of different formwork shuttering systems and can also be used as a standalone external climbing edge protection system. The system has a high load capacity of 50kn per bracket and up to 6m shuttering capability, providing a safe working area during all stages of operation. The main platform has a large 2.4m wide working area and allows for shutter retraction of up to 75cm from the concrete surface.

Flex-table Formwork System for Slab is the easiest and most flexible slab formwork system for all types of slabs consisting of tubular steel props. Tripod, Four -way Head, H20 Timber Beams and Plywood Sheets. The System can be used for a clear height up to 5.90m. We have emerged as one of the most profound manufacturers of normal and Heavy Duty Props. Basically seen at construction sites, all these Scaffolding & Props are widely used for supporting buildings and large structures. Fabricated from best quality steel, our stock of props is highly durable in terms of proficiency. With Light and Heavy Duty Props, one can reduce the cost incurred as these props are reusable to support formwork shuttering. Flex is a slab formwork which is not restricted by modular dimensions and therefore doesn’t dictate to any rules of a modular system. Due to the versatility of the Flex system, all geometric constructions can be realized easily and without difficulties. Maximum variability and adaptability makes the Flex profitable. You are working demand oriented and are saving material, efforts and costs. Solidity of the construction, stability and robustness, as well as versatility and easy assembly characterize the flex system. The Flex-table Formwork System also impresses by its favorable material costs and is therefore an economical solution wherever the wage level is low.

The power of the Auto-Climbing System is the hydraulic system which includes the oil cylinder and two commentators. The Commentators can control the climbing of climbing rail and the bracket. Cranes are not needed during the construction. It’s easy to operate highly efficient and safe. Auto-Climbing System is the best choice for the construction of high buildings and bridges. There are mainly two types of standard auto climbing brackets, ACS50 and ACS100. The systems high load capacity means that special requirements such as platform levels, integrating concrete placing booms, or sustaining concrete loads from overhangs can be realized in an economic way.

The Shaft Platform is mainly used in the concrete pouring of elevator shaft, equipment shaft, stair shaft of high rise building and so on. The Shaft Platform is made up of platform board, timber beam, beam clamp, shaft beam. The Shaft Platform has many types measurements which is able to cover the length between 1.45m to 5.8m.this is to cater different width of shaft. The formwork and platform are to be lifted separately when platform is raised. The formwork is to be lifted first followed by the platform, when the platform is in place it is important to ensure that the shaft beam structure is tightly secured. Space allowance is required between platform edges and concrete surfaces in order to provide sufficient spaces to lift the platform

Single Side Formworks System is used in concrete structures like retaining walls, heavy curtains, etc. According to the increasing fresh concrete pressure due to the height single side formwork systems are produced for different types of concrete. According to the concrete pressure, support distances and type of support is determined. BaiLi Single Side Formwork System offers great efficiency and excellent concrete finishing for structure in building construction and civil works. By using BaiLi Single Side Formwork System there is no chance to form honeycomb structures. This system consists of single sided wall panel and Single Sided Bracket, used for retaining wall. It can be used together with steel formwork system, as well as timber beam system up to the height of 6.0m. Single Sided Formwork System also used in the low-heat mass concrete field. E.g. in power-station construction where wall thickens are so great that the elongation of the tie rods that would take place means that it is no longer technically or economically viable to place through ties.

120 Steel Universal Panel System Including Plywood, no Pre-assembly of the system required. Mainly Used for all types of walls such as Shear walls, Core walls as well as for various sizes of Columns for Various heights. The 120 Steel Universal Panel System is a Steel framed Panel System, which is ready for use and very rugged. The 3.30m, 2.70m and 1.20m panels have various widths from 0.30m to 2.4m with 0.05m or 0.15m intervals the panel width size can apply with all application efficiency. All 120 Steel Universal Panel System are based on cold roll-forming profile for the edges. Theses edge profile is prepared with a special shaping on the inside that allows application of the alignment Couple. The holes are provided in the vertical edge profiles exact alignment of the erected panel is made possible through the recess of the edge profile by using a crowbar (or nail-remover).

  The structure of Ring-lock Stair Tower System is the same as Ring-lock Modular System. The dimension of cross section is 1500×3000mm. It is widely used in construction.

This system is considered using plywood fixed to H20 wooden girders, supported by steel walers and the associated accessories. This is the most common system used for column and wall production. Walkways and lifting brackets allow for good access and safe movement of panels throughout the site using tower cranes. The basis of the H20 Wall & Column Formwork System is the H20 Timber Beam. The H20 Timber Beam is made of the highest quality with competitive advantages.

The Ring-lock Modular System is the most advanced scaffolding system on the market. It assembles quickly and easily, at the same time providing enough versatility to any building configuration. The working principle of Ring-lock Modular System is similar to the Cup-lock System, but the difference is the increased rigidity of the connections. The flat design of the Ring-lock is also helps to prevent from clogging the joint with dirt of whatever type. Ring –lock Modular System is one of the most popular and widely used systems in newly constructed project. Ring-lock is a proven multipurpose scaffold system which can be used for all forms of access and support structures in the building construction industries, façade retention, offshore construction, viaducts etc.