PERI L.L.C

Dubai, United Arab Emirates

The DUO system formwork is characterized by its low weight and extremely simple handling. Not only the material used is very innovative, but also the entire concept: with a minimal number of different system components, walls, columns and slabs can be easily and efficiently formed with only a minimal number of different system components. DUO is the optimal solution for small-sized components with lower surface requirements as well as for restoration work where no crane can be used. Besides the panels including the formlining, most DUO accessories are made of the new innovative composite material with a polymer basis. This material is extremely light and, at the same time, has a high load-bearing capacity. Apart from the material, the developers focused on ensuring that the formwork system was easy to handle. Almost all operations with DUO can be carried out without tools, and the working steps are easy to understand. Even less experienced users of system formwork can work quickly and efficiently with DUO. The fact that the majority of system components can be used for walls, columns and slabs additionally increases the performance. Last but not least, DUO reduces noise pollution on the construction site – an important aspect, for example, on inner-city construction sites. Universally applicable High utilization rate of the components through flexible forming of walls, columns and slabs using only one system Fast and easy to assemble Fast working procedures thanks to simple formwork rules and uncomplicated application without the use of a hammer Installation without the use of a crane High productivity and crane-independence due to the low weight

SB Brace Frames transfer the fresh concrete pressure into the sub-structure and foundations during single-sided concreting of structural elements. It can be used with all PERI wall formwork systems. In addition, SB Brace Frames can be used as horizontal heavy-duty brackets. Very versatile use with all PERI wall formwork as well as horizontal heavy-duty brackets Quickly connected without additional components as all required connection parts are already mounted on the Brace Frame Easy to transport through matching the individual component geometries to suit truck and container dimensions

With its low individual panel weights and simple frame construction of the panels, LICO is ideal for assembling and dismantling by hand. This column formwork is the right choice if lower surface requirements are to be fulfilled and when the emphasis lies on economic efficiency. Cost-effective column formwork with simply constructed steel frames for working without the use of a crane Easy and simple assembly with only 3 panel heights and connecting means which are permanently attached to the panels and cannot be lost Ring bolts on all panels serve as load bearing points for moving with the crane as well as for panel connections when extending

The range of ACS self-climbing variants for facades, building cores, shaft structures as well as inclined bridge pylons make the construction of high concrete structures extremely fast, cost-effective and safe. The climbing units comprising wall formwork and platforms are moved from floor to floor by means of integrated hydraulic systems. The efficient sequence of operations facilitate a very high level of productivity and exceptionally short cycle times. Simultaneous climbing of several climbing units ensures fewer leading edges thus resulting in increased workplace safety. Crane-independent, quick working operations Shuttering, striking and hydraulic climbing in a very fast work rhythm Weather-independent working Comfortably-designed platforms with enclosures protect site personnel against wind and weather Stable working platforms Working platforms can accommodate high loads, e.g. arising from material storage or placing boom masts

The LPS with its mesh enclosure is the lightweight alternative to heavy, enclosed protection panel systems. Nevertheless, the system effectively seals off the inner areas against the effects of the wind; at the same time, it is light-permeable. LPS is used as a vertically continuous climbing protection panel; alternatively, an integrated working platform provides access to the slab stopend formwork. Rail-guided climbing ensures a safe and fast moving procedure. Fast assembly Mesh enclosure assembly without a crane in a very short time; alternatively, can also be delivered pre-assembled Lightweight mesh panels Reduced load on the building due to permeable structure; can therefore also be used for thinner slabs Variable use Can be used as protection panel as well as with supplementary working platforms; mesh panels can also be combined with RCS

CB Climbing Formwork is normally used for supporting large-sized, anchored wall formwork. The climbing unit consists of formwork, working platform, brackets with formwork carriage and strongbacks as well as fi nishing platform. It can be moved very quickly by crane. Large scaffold units with simultaneous high load assumptions through the high loading capacity of the brackets Time-saving moving procedure of the securely assembled units consisting of platform and formwork in only one crane lift Free of tripping hazards in front of and behind the formwork as the platform lining is placed over the brackets (valid for CB 240)

This Chinese plywood is coated on both sides and it is very inherently stable. This plywood panel is especially used for construction purposes for floors, roofs, for flat concrete finishes.

The core veneer construction of the EucaFilm plywood panel consists of eucalyptus. The poplar face veneers are coated of approximately 200g/m² film on both sides. Mostly used as loose formwork panel, the EucaFilm plywood is low-price imported plywood with WBP-bonding.

The focus of the universal TRIO Wall Formwork is on ensuring simple shuttering procedures and reduced shuttering times. Standard panels have only 6 different widths which allows easy handling and efficient logistics. With the BFD Coupler for all connections as well as many other practical system solutions, TRIO has successfully proven itself in countless projects around the world. TRIO is very versatile and efficient in its use - from residential construction and multi-storey structures through to applications in infrastructure projects. This ensures a high degree of utilisation and thus the cost-effectiveness of the system. Variants of the panel formwork, e.g. the aluminum version or for special surfaces, expands the range of applications. The closed panel profiles of the TRIO provide high torsional stability. The excellent product quality guarantees a long service life. For all applications, TRIO fulfils the highest requirements regarding the evenness. Fast working operations with only a minimum of panel widths as well as panels that can be used both horizontally and vertically Easy and simple connections with the BRD Alignment Coupler as the only component for all panel connections Large-area shuttering with standard panels up to 3.30 m x 2.40 m - providing a high level of surface evenness and only 2 tie positions

With VARIOKIT system components, cost-effective tunnel formwork carriages can be realized which are precisely adapted to meet the needs of the respective jobsite. Requirements such as drive-through openings for trucks or single-sided wall formwork are easily fulfilled. Additional components for lifting, lowering and moving are likewise available in the rentable PERI portfolio as are safe working platforms and access means. Required technical accessories, e.g. concrete pump connections, complement the VARIOKIT solutions.  VTC Tunnel Formwork Carriage for the cut-and-cover method Solutions for the monolithic,  semi-monolithic and separate casting methods VTC Tunnel Formwork Carriage when using mining techniques Solutions for the monolithic and separate casting methods Continuously adaptable Gridless, dimensionally-accurate formwork solutions for tunnel cross-sections of any form Workload minimized As an option, shuttering and striking,  lifting and lowering as well as moving with hydraulic and electrical solutions Save on reworking costs High load-bearing steel walers reduce the number of anchors in the wall areas

PERI UP Easy is a "lightweight" among the steel facade scaffolding systems and stands for quick and simple assembly. As the guardrail of the next scaffolding level is mounted from the lower level with the Easy Frame, PERI UP Easy also provides a high level of safety in the system. Through the integrated scaffold nodes on the Easy Frame, PERI UP Easy can be combined with PERI UP Flex Modular Scaffolding. The PERI UP Easy system width is 67 cm (for Width Class W 06) and 100 cm (for Width Class W 09) respectively. For the 67 cm system width, a one-piece combi-deck is available; alternatively, 33 cm wide steel decks can be used. For the 100 cm wide frame, 25 cm decks from the PERI UP Flex modular scaffolding system can also be installed. All PERI UP decks have integrated protection against lifting. This is not only fast and safe but also allows subsequent opening and closing of individual scaffolding bays, e.g. for transporting materials. Assembly of the basic structure takes place virtually without couplers whilst the Easy quick anchoring system also reduces assembly times. Numerous well-considered details, such as the execution of the external and internal corners with very few individual components, make PERI UP Easy fast and highly efficient. In addition, assembly of the PERI UP Easy is a very safe procedure: due to the assembly logic with the Easy Frame, the scaffolder is secured against falling without requiring rope protection when assembling the basic structure. Low weight Fast working due to the low weight of the individual components High degree of safety Fall protection without any additional components through the system-dependent assembly process Fast assembly Mounting takes place with virtually no couplers and a minimum use of tools Special range of applications Can be combined with PERI UP Flex system components

SKYTABLE is the ideal solution for the forming of large slab areas. For buildings with open facades, areas of up to 150 m² can be formed with this large-sized slab table. SKYTABLE operations are always project-specifically planned. The dimensions are in accordance with the building geometry and are only limited by the maximum dead weight of the table. With the remote-controlled lifting mechanism, SKYTABLE can be quickly and safely moved to other storeys. Extremely quick with very large forming surfaces, easy and simple lowering with short distances Extremely safe through a remote-controlled moving procedure of the tables from a safe position on the concreted slab Extremely adaptable through project-specific, individual planning

The main components of the MULTIFLEX are the VT 20K or GT 24 Formwork Girders. As the main and cross beams, their position and spacing as well as the formlining can be freely selected, MULTIFLEX provides maximum flexibility for a wide range of requirements. If the high load-bearing GT24 Formwork Girders are used, large spans for the main and cross beams can be realized. MULTIFLEX is therefore the ideal solution for complicated ground plans, slabs with offsets or integrated downstand beams, as well as forming operations in confined spaces. Optimized use of materials through any combination of GT 24 and VT 20K Formwork Girders as well as a freely selectable girder arrangement For all ground plans through the variable positioning of the girders –  also polygonally or overlapping For all surface requirements with freely selectable formlining for the stipulated quality and adaptable to suit the required joint arrangement