Other Products / Services #4607648

Model No EDG-100A with wheel dia of 100mm & 710W Rated Input Power.

.Model No EDG-100B with wheel dia of 100mm & 600W Rated Input Power.

.Model No EDG-100PB with wheel dia of 100mm & 850W Rated Input Power.

.Model No EDG-125 with wheel dia of 125mm & 900W Rated Input Power.

.Model No EDG-180C Heavy Duty Machine with wheel dia of 180mm, 2200W Rated Input Power, Anti Vibration side handle, Quick adjustment tool free guard and Soft start.

.Model No EDG-025 Die Grinder Used for Grinding, Sanding and Polishing Metal, with Housing Outer Dia of 25mm & 420W Rated Input Power.

.Model No ESG-125 Straight Grinder Used for Grinding, Sanding and Polishing Metal, with Wheel Dia of 125mm & 1050W Rated Input Power.

Eastman is a reputed brand in the Hand Tools industry providing an entire range of quality hand tools at a reasonable and fair price.

Their Socket products are considered as good as (or even better than) those of other big names in this industry.

All Eastman tools come with a lifetime warranty against manufacturing defects.

We are one of the authorised stockists of Eastman Hand Tools in this region and carry stocks of almost their entire range of tools.

Their Product and Size range includes:

PRODUCTSIZE RANGE

• Double (Open) End Spanners 6 x 7 to 55 x 60 1/8" X 3/16" to 1 1/8" x 1 1/4"ww
  
• Ring Spanners6 x 7 to 55 x 60 1/8" X 3/16" to 1 1/8" x 1 1/4"ww
  
• Combination Spanners 6 to 32
• Pipe Wrenches 10" to 36"
  
• Adjustable Wrenches 6" to 15"
  
• Tubular Spanners 6 x 7 to 30 x 32
  
• Bolt Cutters 8" to 42"
  
• Pliers - Combination, Nose and Side Cutting 6" & 8"
  
• Vice Grip Plier
• Screw Driver Kits
  
• Slip Joint Plier
• Water Pump Pliers
• Allen Keys1.5 to 361/16" to 5/8"
  
• T - Handle Allen Keys 2 to 10
• T Spanner 8 to 14
  
• Hammers - Ball Pein and Cross Pein 100gms to 800gms
  
• Sockets and accessoriesIn 1/2" drive - 8 to32 In 3/4" drive - 19 to 70
  
• Cross and L - Type Wheel Spanners 18mm to 21mm
  
• Impact Drivers
• Slogging open Wrench 22mm to 120mm
• Slogging Wrench Ring 22mm to 120mm
• Single open End Spanner 36mm to 75mm

.Model No EVC-015B Domestic Wet and Dry Model with a capacity of 15Lts & a Rated Input Power of 1000W.

.Model No EVC-015 Industrial Wet and Dry Model with a capacity of 15Lts & a Rated Input Power of 1000W.

.Model No EVC-030 Industrial Wet and Dry Model with a capacity of 30Lts & a Rated Input Power of 1000W.

• Ball Pein Hammer with handle - GDSON - 1/4 Lb to 2 Lbs (100gms to 800 gms).
• Claw Hammer with Handle - GDSON - 1/2 Lb to 1 1/2 Lb.
• Pipe Wrench Stillson Type - GDSON & FLEX - 10"(250mm) to 24"(600mm)
• Screw Drivers with Flat end (-) and Star end (+) - GDSON - 1/8" x 2 1/2" to 3/8" x 12"
• Hacksaw Frames - GDSON - Heavy 1/4" and Tubular
  
• Handsaws with pvc handle - 12" to 24"
  
• Iron Handle Claw hammer - 1/2 Lb & 1 Lb.
  
• Pincers - 8"
  
• Plumbobs - No 3 & 4 in Folding Type and Nos 6, 8 and 10 in Plastic type.
  
• Tin cutter with spring - 8", 10" & 12"
  

Besides the above we also stock the following items produced in other parts of the country.

• Augers - 1/4" to 1"
  
• Carpenter Chisels - Elephant Brand - 1/4" to 4"
• Mortise Chisels -Elephant Brand - 1/4" to 3/8"
• Chisel and File PVC Handle
• Cutting Pliers, Nose Pliers and side cutting pliers - GMS - 6", 7" & 8".
• Masonary Drill Bits (Concrete Drill Bits) - STB brand - 3/16"(5mm) to 1/2" (12mm)
  
• Hacksaw Blades Painted & oil - 1/2" x 18tpi & 24 tpi, 1" Single edge and Double edge.
• Plainer Patta - 1 1/4" x 6" to 2" x 6"
• Jumper Holders and Bits - Congo brand - No 8 to 20
  
• Needle Files - Bonus - 10cm to 20cm
• Sledge Hammers without handle - 1 Lb to 20 Lbs

Following are the imported items with us;

• SDS Drill Bits - YURI & CONGO - 5 x 110mm to 28 x 450mm
• Cut off wheels Single mesh and Double Mesh - CONGO - 4", 5" & 14"
  
• Marble/Concrete/Granite Cutting blade - CONGO - 4" & 5"
  
• Wood Cutting Saw - CONGO - 4", 5" & 7"
• Grinding Wheel - CONGO - 100 x 4mm & 100 x 6mm
• Sandar Disc - CONGO - GRIT 24 to 120

We also deal in;

• Addisson Drill Bits
• Imported Drill bits
• Wooden Drill Bits
• ESCON Files

Model No EMC-110A with Saw Disc Dia of 110mm & 1300W Rated Input Power.

.Model No EMC-110P Round Body with Saw Disc Dia of 110mm & 1050W Rated Input Power.

• Jig Saw

.Model No EJS-060 with Cutting Depth of 60mm & 600W Rated Input Power.

• Electric Router

.Model No EER-012 with Chuck Dia of 12mm & 1600W Rated Input Power.

Model No ECM-355AHeavy Duty Machine with heavy duty Armature of core length of 78mm, a strong Aluminium Gear Housing, Solid and Rigid Base, a D Type Handle, Wheel Dia of 355mm & a Rated Input Power of 2400W.

.Model No ECM-355C Solid and Rigid Base, a D Type Handle, Wheel Dia of 355mm & a Rated Input Power of 2400W .

Spring washers are made out of spring steel and are hardened to HV 430 to 530 and are used along with almost every externally threaded fastener.

Flat (Rectangular) and Square sections are the generally used types of spring washers. Square section spring washers are used for use with fasteners with cylindrical heads and Flat section spring washers are used for all other types of heads. Spring washers of square section are lighter, and thereby, cheaper than the ones with a rectangular section.

These washers are normally available in Black finish. Other finishes like zinc coated (with hydrogen de-embrittlement) in Blue or Yellow passivation, Cadmium Plated, Nickle Plated, Bright Chromium plated and Phosphated are also available.

Size Range

Flat (Rectangular) Section

• 3 to 52 in MM series generally conforming to IS 3063-1994 and DIN 127
• 1/8 to 2 in inch series generally conforming to BS 1802-1951

Square Section

• 3 to 52 in MM series generally conforming to IS 6735-1994 din 7980
• 1/8 to 2 in inch series generally conforming to BS 1802-1951

Mild steel fasteners are widely used for all general purposes where high strength and corrosion resistance is not required. Their low cost makes them ideal for everyday use. Mild steel Bolts and Screws conform to grades 4.6 and 4.8 and Nuts to grade 4. Higher grades of 5.6 and 5 are also arranged against order.

Our range in basic Builder's hardware comprises of Butt Hinges, Tower Bolts, Piano Hinges and Padlocks of various types in Mild Steel, Brass, Aluminium and Stainless Steel.

Mild steel hardwares are available in self finish, oxidised, powder coated, Zinc Plated and Chromium plated finishes.

Aluminium hardware is available in Anodised (Matt) and powder coated finishes.

Products with their available size range are given below:

• M.S. Butt Hinges generally conforming to IS 1341-1992 (Tab 3) Medium series ISI marked - 40mm (1 1/2") x 17G to 150mm (6") x 13G.
• M.S. Butt Hinges generally conforming to IS 1341-1992 (Tab 6) Heavy series - 50mm (2") x 12G & 75mm (3") x 10G.
• Stainless Steel Hinges generally conforming to IS 12817-1997 - 65mm (2 1/2") to 150mm (6").
• Aluminium Hinges generally conforming to IS 205-1992 - 50mm (2") x 12G to 150mm (6") x 8G.
• Brass Hinges / Railway Hinges generally conforming to IS 205-1992 - 2" x 3/4" x 1/16" to 6" x 1 1/8" x 5/32".
• Barrel Tower Bolts generally conforming to IS 204

1. Mild Steel - 75mm (3") to 12" (320mm) as per IS 204 (Part 1) 1991
2. Aluminium - 8 x 75 to 12 x 200 as per IS 204 (Part 2) 1991
3. Brass - 1/4" x 2" to 1/2" x 8"
4. Stainless Steel - 3" to 12"

• Piano Hinges in mild steel and stainless steel generally conforming to IS 3818-1971 - 1/2" x 6' to 1" x 6' (30mm, 40mmm and 50mm x 1825mm).
• Double Acting Spring Hinge generally conforming to IS 453-1993 in sizes 75mm and 100mm.
• Sliding Door Bolts (Aldrops) generally conforming to IS 281- 2009

1. Mild Steel - 3/8 x 6" to 5/8" x 12"
2. Aluminium - 1/2" x 6" to 5/8" x 12"
3. Stainless Steel - 3/8" x 6" to 5/8" x 12"
4. Brass - 1/2" x 8" and 5/8" x 10"

• Hasp And Staple - Gate hooks and eyes - Screw type(GI) 3" to 10" Plate type(CP) 2" to 6"
• Brass Cupboard and Drawer Locks generally conforming to IS 729-1979 - 40mm to 75mm (1 1/2" to 3").
• Die Cast Powder coated handles - 3" to 6" in Teak wood, Rose wood Satin and other finishes.
• Iron and Brass Mortise Locks in 7".

Dowel pins are used to locate machine parts in a fixed position or to maintain alignment between them.They are of three types, viz. Spring dowel sleeves (hollow), Solid Dowel pins (hardened) and Taper Pins.

Dowel pins are used to locate machine parts in a fixed position or to maintain alignment between them.

They are of three types, viz. Spring dowel sleeves (hollow), Solid Dowel pins (hardened) and Taper Pins.

We stock all the three types in the following size range;

• Spring Dowel Sleeve generally conforming to IS 5988-1970 hardened and tempered to 445 to 515 HV - 2 x 16mm to 12 x 100mm
• Solid Dowel Pins generally conforming to IS 6689-2003 with a hardness of 650 to 750 HV - 2 x 16mm to 20 x 150mm
• Taper Pins generally conforming to IS 6688-2005 - 2 x 16mm to 16 x 150mm

Split Pins are used in a wide range of applications along with threaded and unthreaded fasteners as an additional safety locking arrangement to prevent accidental detachment of fasteners which may be caused by vibration or other such activity. Split Pins are made of low carbon steel to avoid breakage while bending and are available in Self finish and in Zinc coated finishes.

Size Range available is;

• Split (Cotter) Pins in inch series with length measured from head to short length - 1/16" x 1/2" to 1/2" x 6"

• Split Pins conforming to IS 549 - 2005 with length measured from neck to short length - 1.6 x 10mm to 13 x 150mm

Flat Split Cotters conforming to IS 2638-1974, and,

Bulb Type Flat Split cotters as per railway drawings are supplied against order.

This Ludhiana based company prides itself in providing an entire range of screw drivers and pliers with quality comparable with the best and at easily affordable prices.

We are authorised stockists of PYE tools and carry stocks of almost their entire range of tools.

More popular among their range of tools as stocked by us are;

SIZE RANGE

• Combination (Cutting) Pliers 6" to 8"
• Long Nose Plier 6"
• Side (Diagonal) Cutters 6"
• Circlip Pliers - Internal & External 7"
• Pipe Wrenches 12" to 24"
• Wire Stripper & Cutter
• Nipper
• Cable Cutter
• Screw Drivers (-)2.5 x 50 to 10 x 600
• Screw Drivers (-) Insulated3.25 x 100 to 10 x 250
• Screw Drivers (+) 2.5 x 50 to 10 x 200
• Screw Driver Torx 3 x 75 to 8 x 200
• Nut Drivers 3 to 14
• Screw Driver Two-in-one
• Screw Driver Kits
• Soft Faced Nylon Hammer 20mm to 50mm
• Spare Mallet for Nylon Hammer 20mm to 50mm
• Hammer Ball Pein and Cross Pein 100 to 800gms