Our Products
SS Water Bucket: 24 Liters, 2 buckets.
With 2 holes, Supplied with/ without candles.
Specialized lid.
In this era where every human should have a basic right of health and sanitation, we provide solutions for safe and sustainable sanitation which can cater to a wide range of users. Our readymade portable toilet is one such step towards the basic sanitation.
Readymade
Made with superior grade of plastics
Rust and corrosion proof
Light weight and portable
Easy to install
Tough and durable
Easy to clean
Square shaped toilet bowl
Material: FRP/PVC
Indian seat type
Dimension: 1m*1m
Vents for ventilation
In this era where every human should have a basic right of health and sanitation, we provide solutions for safe and sustainable sanitation which can cater to a wide range of users. Our readymade portable toilet is one such step towards the basic sanitation.
Readymade
Made with superior grade of plastics
Rust and corrosion proof
Light weight and portable
Easy to install
Tough and durable
Easy to clean
A basic toilet comprise of walls, doors and a toilet pan. This provides the user privacy and security within the superstructure. Our affordable solution for safe and sustainable sanitation can cater to a wide range of users.
Portable and Light weight
Easy assembly and disassembly.
Can be installed anywhere.
Sturdy construction
Low cost
Long life
Frame material: Mild steel angle (25mm*25mm*3mm)
Wall material: FRP sheet of thickness 3mm
Door: Light weight fibre door is used (1830mm*762mm*30mm)
HDPE squatting slab is used as toilet pan
Raised roof protects the rain water coming inside.
The gaps at top provide ventilation.
In order to encourage good hygiene around the toilet stalls, a hand washing station is also included in the facility designs. The design of our hand washing station attracts people to have frequent hand washes, thus improving sanitation. The foot operated design allows better hand washing with minimum wastage of water. The product finds wide applications such as in schools, clinics and refugee camps.
The whole setup can be contained in the lower container.
Portable and Light weight
Easy and quick installation
Elimination of tap contamination
Minimum water used for hand wash
Hygienic
Pure water container (15 liters)
Grey water container (12 liters)
Wash bowl (2.5 liters)
UPVC tap
Soap stand
Wooden/Plastic/metallic foot paddle
One way valves used in squeeze bulb for pumping water
BAG, PE plastic, for garbage, 35L, grey, 0.06mm, 58x60cm |
FLASK, Camping, 1.1L |
MATCHES, safety matches, small box |
PAD Shorthand A5, ruled |
PENCIL no 2 |
MARKER PEN, permanent, medium size, red |
IODINE POVIDONE, 10%, solution, 200ml, dropper btl. |
ORAL REHYDRATION SALTS (O.R.S.), sachet 20.5 g/1 L |
Dettol / Savlon - Liquid - 30 Ml |
SOAP BOX, plastic |
RESCUE SHEET, silver/gold insulating foil, 210 cm x 160 cm |
CANDLE, for first aiders, 50x100mm, red, 8h light |
BANDAGE, ELASTIC, 10 cm x 5 m, constraining |
BANDAGE, GAUZE, 08cmx4m, elastic, non sterile |
BANDAGE, TRIANGULAR, 136 x 96 x 96 cm |
COMPRESS, GAUZE, 10 x 10 cm, 8 plys, 17 thr., ster., 2 pcs |
COMPRESS, GAUZE, 10 x 20 cm, 12 plys, 17 threads, non-ster. |
COMPRESS, PARAFFIN, 10 x 10 cm, sterile |
COTTON WOOL, 100g, 100% cotton, hydrophilic |
DRESSING, FIRST AID, ALUMINIZED, 35x45cm, sterile |
DRESSING, ADHESIVE BANDAGE, wound plaster, 6cm x 5m, roll |
TAPE, ADHESIVE PAPER, 5 cm x 10 m, roll |
GLOVE, EXAMINATION, LATEX, non sterile, medium (7-8) |
MASK, PROTECTION, for mouth-to-m. resuscitation, reusable |
BACK-PACK, f.aider, 55x34x22cm, in-outside compartments, red |
SCISSORS, 14.5 cm, sharp-blunt, straight |
SCISSORS, |
SCISSORS, |
FORCEPS, FEILCHENFELD, 9.5 cm, straight |
SCISSORS, DRESSING, LISTER, 18 cm |
dip galvanization with minimum 120g/m2 zinc or aluminium zinc on each side (=240g/m2 total coating weight) Hardness: 85HRB minimum.
UNHCR standard
Waterproof, tearproof and material trim finish
90x180cm/1.62m2
Will last for +12 months of use under hard tropical conditions
Suitable for one adult or two children.
Marking, logo and color are customised to your requirements
Materials | |
Mat |
100% virgin mono-lament or multi-lament warp and thick tape PP or Polyester yarn in weft |
Yarn |
Tightly woven 2/2 twill structure using a mono-filament or multi-filament warp and thick tape PP or polyester yarn in weft |
End width |
Secured with a woven, bias-binding tape with stitches through the mat fabric |
Container | With pallet | Without pallet |
20’ GP container |
28 pallets (3,500 pcs) |
4,875 pcs |
40’ GP container |
60 pallets (7,500 pcs) |
10,625 pcs |
40’ HC container |
48 pallets (7,500 pcs) |
12,000 pcs |
Size | : | Various sizes |
Sleeping bags are made of a thick layer of non-woven synthetic material covered on both sides with a synthetic/cotton sheet. 100% synthetic filling is recommended to avoid being rotted by moisture.
Sleeping bags are recommended for cold countries only. The square type can also be used open as a quilt.
The insulation capability of a sleeping bag is define by the TOG (Thermal resistance Of Garments). The TOG does not depend only on the weight or the thickness, but also on the fibre quality, and the type of manufacture.
-TOG is defined and tested under ISO standard procedure in a laboratory, and cannot be reliably tested in any other way. This test also includes evaluation of the water vapour permeability, which we apply only to synthetic materials.
Insulation from the ground is another important factor in cold climate bedding
Ajay uPVC Pipes are used in all conceivable applications ranging from Agriculture to sanitation, bore well to electrical ducts because of low cost, low pressure features they became favorites of all farmers, builders & Industrialist.
Features and Specifications
Material |
100% cotton fabric (Anti-microbial). |
|
Anti-Microbial (USP) |
It will inhibit the growth of Staphhylococus aureus by 99.9% even after 30 washes. |
|
|
||
Tested by |
Thomson Research Associates Inc. (Canadian laboratory) |
|
|
||
Colour |
Light yellow |
|
Sizes (4 options) |
40 cm X 40 cm, 50 cm X 50 cm, 54 cm X 54 cm, 56 cm X 56 cm |
|
|
||
Thread |
Made from 100% AZO free thread |
|
Stitching |
Well hemmed with cotton thread. Machine made. No run or broken stiches |
|
|
||
Tolerance |
The tolerance allowed in measurements is (+/-5%) |
|
General Quality |
Soft fabric, no bad smell, no skin irritation |
UNHCR/UNICEF/ICRC/IFRC standards
Resistant to fire, thermal and air flow
Minimum 2.5 TOG for outdoor use and indoor use without artificial heat
1.5m x 2m medium synthetic blankets made of virgin fibers from polyester, knitted and dry raised both sides, ISO C1833 on dry weight,
100% virgin polyester
Recommended in mildly cold temperatures
All our materials are UV-proof, waterproof, rotproof and fire resistance
Marking and logo customised to your requirements
|
Materials |
Blankets |
100% virgin fibers from polyester, knitted and dry raised on both sides, ISO C1833 on dry weight, grey |
Thickness |
ISO 5084, 3mm minimum (1KPa on 2000 mm2) |
Tensile strength |
ISO 13934-1: 250N warp and weft minimum |
After washing |
ISO 13934-1 and ISO 6330: Max 5% warp and weft after 3 consecutive machine washes at 30°C and one flat drying |
Shrinkage |
ISO 6330: Max 5% warp and weft after 3 consecutive machine washes at 30°C and one flat drying |
Weight loss after washing |
Max 5% after 3 consecutive machine washes at 30°C and one flat drying |
Thermal resistance |
ISO 5085-1: TOG 2.5 (or 0.25m² K/W) minimum, rounded to the nearest 0.1, passed on samples picked from compressed bales |
|
after 3 consecutive machine washes at 30°C and one flat drying |
Air flow resistance |
ISO 9237 under 100Pa pressure drop: Max 1000L/m²/s |
Fire resistance |
ISO 12952 - 1 and 2: Resistance to cigarette. No ignition |
|
ISO 12952 - 3 and 4: Resistance to flame. No ignition |
|
Specification under normal textile test conditioning ISO 139, 65% moisture, 20°C for 24 hours |
Organoleptic test |
No bad smell, no skin irritation, no dust. 4 |
Finish |
Whipped seam at 10mm from the edge with 10-13 stitches/ 100mm or stitched ribbon or hemmed on 4 sides |
GI Riser Pipes, 32mm NB Pipe, mild steel, Medium series, longitudinally welded, to be used as rising main for India Mark II hand pumps, hot dipped galvanized and passivated, manufactured as per IS:1239 (part 1) 2004, socketed one end with a seamless socket, duly galvanized and chamfered, and the other end protected with a HDPE thread protector, covering entire thread of pipe, length 3 meters +0/-25 mm, .
With Pallet |
Without Pallet |
||
20’ GP container: 22 Pallets (616 Pieces) |
20’ GP container: 784 Pieces |
||
40’ GP container: 50 Pallets (1,400 Pieces) |
40’ GP container: 1,680 Pieces |
||
40’ HC container: 50 Pallets (1,400 Pieces) |
40’ HC container: 1,890 Pieces |
Exercise books, A5, (various pages)
. Pencil with eraser
. Blackboard duster
. Chalk
. Biro pens (blue, red, black)
. Erasers
. Pencil Sharpeners
. Manilla sheets
. Felt pens (assorted colors)
. Plastic rulers
Material | 1st Layer - 100% cotton fabric (Anti-microbial), |
2nd Layer - Foam or 3 Layers of Cloth | |
3rd Layer – Polyester cloth (Kids design printed) | |
4th layer – Waterproof Layer | |
Snap button and Velcro option available. | |
Anti-Microbial (USP) | It will inhibit the growth of Staphhylococus aureus by |
99.9% even after 30 washes. | |
Tested by | Thomson Research Associates Inc. |
(Canadian laboratory) |
Material | 1st Layer - 100% cotton fabric (Anti-microbial), |
2nd Layer - Foam or 3 Layers of Cloth | |
3rd Layer – Polyester cloth (Kids design printed) | |
4th layer – Waterproof Layer | |
Snap button and Velcro option available. | |
Anti-Microbial (USP) | It will inhibit the growth of Staphhylococus aureus by |
99.9% even after 30 washes. | |
Tested by | Thomson Research Associates Inc. |
(Canadian laboratory) |
Say Goodbye to darkness in the evening and costly electricity bills. Our Solar Powered LED Lightining solutions harness the sun's energy to provide high - quality illumination for indorr and outdoor applications. This breakthrough technology delivers a convenient, sustainable way to light your space with minimal investment and maintenance.
We have various types of solar light like all in one lights, Garden solar light, Integrated solar light with (Inbuilt Batteries) and IV) commercial solar street light range is form 60 watt to 250 watt.
Solar Pump DC Pump hybrid pumping from 05kV to 1.4 kV Grundfos and Lorentz and in the hybrid system, ATX Pumps with a hybrid which can work with solar and hybrid power.
ICRC/IFRC/MSF/Oxfam standards
Fire retardant (optional)*, waterproof, rotproof and UV-resistant
Band reinforced tarpaulin in sheet of 4m x 6m developed by international research project and designed for long outdoor use in all climates
Woven high density polyethylene (HDPE) black fibers fabric laminated on both sides with low density polyethylene (LDPE) coating
Highly recommended for family shelter protection.
Weight | |
Specific sheet |
190 ± 20g under ISO 3801 (equivalent to min 170 to 210 gsm max) |
without bands weight |
|
Complete sheet with |
Plain sheet specific weight plus 10% additional weight for |
bands weight |
reinforcement bands under ISO 3801 |
Total weight |
From min 187 to 231 gsm. Specific weight of bands from min 150 to |
|
200 gsm max. |
Materials | |
Sheet |
Woven HDPE black fibers fabric, double-side lamination with LDPE coating, reinforced with 6 bands of 75 mm width woven black HDPE fibers fabric |
|
and coated outside. |
|
Pre-punched 8mm holes on the 2 side bands at 0.1m +/-10% intervals, positioned in the Centre of the bands (only the reinforcement bands are pre- |
|
punched, not the tarpaulin itself). |
Tensile strength |
Min 500N, 15-25% elongation in warp and weft in plain sheet under ISO 1421-1 |
UV resistance |
After 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475N |
Reinforcement |
Min 700N as per ISO 1421-1, pulling lengthwise in a pre-punched 8mm hole with a hook of 8 mm wire diameter, at 200mm from the end of the band. UV |
bands |
resistance 80% of original value and not less than 665N. |
Welding |
Only 1 is allowed, lengthwise. The tarpaulin tensile strength crossways at the place of welding under ISO 1421-1 minimum 50% of original value and not |
|
less than 400N |
Compact and durable cooking utensils providing complete solution for daily usage
Stainless steel 200 series, ISO type 1.4016 (American grade 430)
One set in a carton
29 x 29 x 19 cm box / 7.0 Kgs approx.
Suitable for family of 5 people.
01 x 7L stainless steel cooking pot
01 x 2.5L stainless steel frying pan (used as lid for 7L cooking pot
01 x 5 litres, stainless steel cooking pot with lid
05 x 1 litre, stainless steel bowl
05 x stainless steel plates
05 x stainless steel cups
05 x stainless steel table spoons
05 x stainless steel table forks
05 x stainless steel table knives
01 x kitchen knife with stainless steel blade
01 x wooden serving spoon
01 x serving spoon
01 x serving ladle
01 x stainless steel scouring pad
Materials | |
Stainless steel tableware |
Plates, cups, bowls, forks, spoons and knives: 200 series stainless steel of appropriate grades for tableware items, or (i) ISO |
|
type 1.4016 (American grade 430), or (ii) ISO type 1.4301 (American grade 304) |
Stainless steel cookware |
Cooking pots and pans: 200 series stainless steel of appropriate grades for cookware items, or (i) ISO type 1.4016 (American |
|
grade 430), or (ii) ISO type 1.4301 (American grade 304) |
Chromium |
Minimum chromium content: 13.0 p 100 |
|
|
Possible added elements |
Ta, Nb, Zr, Mo, Ti, Al, Cu with these maximum contents: |
|
• 1 p 100 for Ta, Nb, Zr |
|
• 4 p 100 for Mo, Ti, Al, Cu |
KIT, WATERTANK, flexible onion, 5 m3, storage
KIT, WATERTANK, flexible onion, 10 m3, storage
KIT, WATERTANK, flexible onion, 20 m3, storage
Flexible water tank, open top, fast set-up, light-weight and small volume for transport.
Specifications
Heavy-duty, drinking-water quality, PVC-coated polyester
2 x 2 BSP threaded outlet (ICRC standard)
2 x 3 BSP threaded outlet (Federation ERU standard)
Anti-chafe patches and flaps
PVC cover with attachment hasps and ropes
Packaging as per IATA regulation UN 1133 (for the glue) and UN 1263 (for the thinner)
KIT, REPAIR, for flexible tank PVC reinforced material
Repair kit for flexible water tanks of PVC-coated polyester material (standard PVC tank material).
The glue is neoprene-specific for PVC sheets, and is not the same as PVC pipe glue.
The thinner is usually acetone, but thricloethylene, a highly flammable item, can also be used.
Thinner must be packed in a safe unbreakable container, and is subject to transport regulation.
Specifications
Refer to specifications for individual items.
Packing as per IATA regulation for UN codes:
1. - Glue: UN 1133
2. - Thinner: UN 1263
General information 6-tap stand for individual water distribution to large numbers. The stand should be installed in a safe area, where people can queue for water collection. Waste-water drainage is essential to keep the area clean.
One stand can serve 1000 people with 20 litres each in 12 hours. The water pressure at the tap is determined by the head difference between the surface on which the water tank's base is resting and the tap, it may be necessary to create an elevated surface on which to install the tank.
ICRC standard: tap stand with six -turn taps and a 2 Storz coupling.
1. - -turn taps are cheaper than automatic valves, and close efficiently even with very low pressure
2. - One wooden box contains all the necessary items to assemble a complete stand, and to terminate with a Storz 2 coupling.
International Federation ERU standard: tap stand with self-closing taps (also standard for Oxfam, MSF, etc.)
1. - Self-closing valves (Talflo, etc?) close "automatically", saving water. Sometimes leakage may occur with very low pressure (less than 1 bar). More expensive than -turn valves.
2. - One box contains all the necessary items to assemble a complete stand, and to terminate with a 1.1/4 BSP coupling. See adaptation couplings in option list.
Do local manufacturing as soon as possible.
In emergency situations the construction of latrines is the most important step towards sanitation and that needs to be done within a day using usually unskilled labour and minimal instructions. Keeping the easy installation in mind, we have designed our squatting slabs.
Good strength
Self-supporting
Low maintenance required
Easy transportation
Light weight
Hygienic sanitation
Dimension:Length: 1200mm Width: 800mm Thickness: 54mm
Weight:8.70 Kg
Material:High Density Polyethylene (HDPE) having good strength and less permeability to moisture and chemicals.
Lid:The latrine slab comes with a key hole shape kick lid. For better promotion of sanitation, it comes with a Wash your hands symbol in a standard neutral grey colour.
Ground anchors and Drilling points:Four galvanized ground anchors are stored within bespoke recesses on the plate underside. These pins are designed to fit within the holes positioned around the perimeter of the squatting slab to be fixed to a supporting superstructure or the ground.
Underside of the latrine slab:The squatting slab has hand shaped recesses underside, which allows the slab to be moved easily and hygienically to new locations. It also has D nut arrangement allowing for adding pour flush latrine pan and water seal trap if required.
We manufacture and supply highly acclaimed Treadle Irrigation Pumps in the international market. These types of Irrigation Water Pumps have discharge capacity of approximately 2000 to 2400 Ltrs per hour. They are suitable for irrigation up to the area of 2 Acers of land. Manufactured from the best quality raw materials like steel, our Irrigation Water Pumps are highly endurable and long lasting in nature. In addition to this, we are considered as an eminent Irrigation Water Pumps Manufacturer and one of the ace Exporters of the same.
Steel Treadle Irrigation Pump (Pulley & Steel Rope Arrangement)
Ajay Riser Main pipes are made of special uPVC compound for using Handpump and submersible pump installations. The ends are fitted with specially designed heavy duty moulded PVC male/female threaded fittings.With our continuous R&D efforts we have developed uPVC Riser Main pipes with Stainless Steel Coupling. The stainless steel coupling with male thread insert is fitted and crimped at both end of the pipes. This stainless steel coupling is coupled with the help of a female threaded socket.
Ajay certified high quality Adopters (both top & bottom) Made of Cast Iron (CI) / Mild Steel (MS) / Stainless Steel (SS) used with Ajay Column Pipes give true & corrosion proof system. |
Pump Guard can be used between bottom pipe & bottom adaptor (connector). Pump guard is recommended for the areas where excessive pump viberations are observed.
These are flexible co-extruded hoses for domestic applications. They can be manufactured in any size and colour. Typical Sizes: inch, 5/8 inch, inch, 1 inch, 1 inch. Washing Machine Hoses: Ajay Industrial is a supplier of special purpose washing machine hoses to major washing machine manufacturers in the country. These are flexible co-extruded nylon reinforced hoses.
Ajay Hose is all-purpose suction and discharge flexible hoses with rigid PVC spiral. It is a lightweight suction and delivery hose, which has a specially compounded PVC reinforcement, which is helically wound and inseparably fused to the soft inner walls. The structural composition of the walls so formed is ideal for withstanding multi-axial stress under load.
Internal Diameter Inches | Weight in Grams per meter | Bending Radius mm | Bursting Pressure kgf/cm2 | Wall Thickness mm | Spiral Pitch mm |
11/2” | 650 | 70 | 15 | 3.7 | 7.5 |
2” | 800 | 110 | 13 | 3.5 | 7.5 |
21/2” | 1100 | 150 | 13 | 4.3 | 8 |
3” | 1500 | 200 | 11 | 4.3 | 8.5 |
4” | 3000 | 230 | 11 | 6.5 | 9.5 |
5” | 3600 | 320 | 10 | 7 | 11.4 |
6” | 4500 | 800 | 8 | 8.5 | 12 |
Ajayflat is a multipurpose industrial hose, manufactured under technical know-how from Industries Plastiche Lombarde, Italy. It is made by an advanced continuous manufacturing technique using a special formulation of PVC and high tensile polyester yarn. The process ensures total penetration of PVC onto the interstices of the polyester reinforcement and inseparable fusion of the inner and outer walls of PVC. This method of production allows maximum strength to be obtained while maintaining minimum wall thickness.
The hose thus produced has an exceptionally high hoop strength, at the same time allowing minimum longitudinal movement. It is a lightweight, water- proof flexible hose. It is resistant to weather, abrasion, process fluids and is rugged enough to take repeated daily rough handling. It does not corrode and is available in long lengths. It assumes a conventional round appearance under pressure and returns to its flat shape after use, for easy handling and storage. It does not need drying and can be rolled immediately after use. Ajayflat is tough and will give many years of useful service.
Acetic Acid 60%, Alcohol Ethyl, Alcohol Isopropyl, Alcohol Methyl 6%, Aluminium Salts, Ammonia (Dry Gas), Salts-Ammonium Sulfide, Barium Salts, Brine, Butane, Butanol, Calcium Salts, Carbon Dioxide, Carbon Monoxide, Citric Acid, Detergents, Ethylene Glycol, Glucose, Glycerin, Hydrochloric Acid 22%, Hydrofluoric Acid 60%, Hydrogen Peroxide, Lead Salts, Magnesium Salts, Molasses, Nickel Salts, Nitric Acid 50%, Nitrogen Fertilizers, Oleic Acid, Oxygen, Phosphoric Acid 30%, Potassium Hydroxide 10%, Potassium Salts, Sea Water, Soap Solution, Sodium Salts, Urea, Vegetable Oil, Vinegar, Water.
The above table is to be used as a guide only and is based on tests, believed to be reliable. However we do not owe responsibility for processes beyond our control.
Type | Nominal Internal Diameter | Pressure (Kg/ Cm2) | Length/ Roll (Meters) | ||
Inches | MM | Working | Bursting | ||
Light Duty Colour: GREEN |
2 2.5 3 4 |
50 63 76 100 |
4 3.5 3 3 |
12 10 9 9 |
50 50 50 50 |
Medium Duty Color: YELLOW |
2 2.5 3 4 6 |
50 63 76 100 150 |
6 5 5 4 3 |
18 15 15 12 9 |
50 50 50 50 50 |
Heavy Duty Color: BLUE |
2 2.5 3 4 6 |
50 63 76 100 150 |
8 8 7 7 4 |
24 24 21 21 12 |
50 50 50 50 50 |
Tolerance for Diameter + -1% Other Data + - 5% | |||||
Technical Data at 20 C Working Temperature -10 C to + 60 C | |||||
Other type and sizes available on request subject to a minimum quantity. |
Pump Type: India Mark III Deep Well pump as per Bureau of Indian Standard Specifications with 63.5mm dia cast iron brass sleeved open top cylinder assembly. Recommended for water level setting depth (meters): 20-45
Minimum ID of bore (millimeter): 125
Approximate Discharge (Liters/Hour): 900
GI Riser Pipe: 65 mm NB x 3 meter length
MS/SS Connecting Rod Diameter: 12mm x 3 meter length