Post Buy Requirement
AS
Mumbai, Maharashtra, India
Add Review

Our Products

  1. Roll Forming & Bending Machines 7 Products available
  2. Machines And Equipments 5 Products available
  3. Industrial Machinery 4 Products available
  4. Welding Machinery 3 Products available
  5. Crusher, Shredder & Presses 4 Products available
  6. Air Compressor 4 Products available
  7. Others 87 Products available

Other Products / Services

Drip Irrigation Lines

Symetric And Nano Flat Drip Irrigation Pipe Production Line


The creation of highest level technology and experience Damla Plast Flat Drip Irrigation Pipe Line can produce flat irrigation pipes which is the new shining star af irrigation systems in a safe and fast way while all operations are under control. There are special systems in the machine that allows you to make production of different diameter and net thickness and this system will provide the best diffusion between pipes and drippers, will check the accuracy of drilled holes and will detect errors on the product such as rupture.


Damla Plast, as usual, did not compromise the quality for this machine, established the principles such as high efficiency, easy to use, fast service, spare parts supply from stock and has offered these to our esteemed customer.



Throughout the project, for our esteemed customers working with us, solutions are created for preliminary examination, installation and commissioning, training, staff support, mold and other necessary equipments.

 
DFX - 1000F
Premium
DFX - 1000F
Premium Plus
DFX - 1500FC
Nano
DFX - 500F
ECO
DFX - 500FC
ECO Nano
Pipe Diameters mm 16 - 22 - 25 16 - 22 - 25 16 - 22 - 25 16 - 22 - 25 16 - 22 - 25
Pipe Wall Thicknesses mm 0,15 - 0,60 0,15 - 0,60 0,15 - 0,60 0,15 - 0,40 0,15 - 0,40
Maximum Working Speed m/min 200 250 250 150 150
Optimum Production Speed m/min 160 - 180 200 - 220 200 - 220 120 - 125 120 - 125
Inserter Type - Servo Servo Servo Servo Servo
Dripper Type - Flat / Symmetric Flat / Symmetric Flat / Asymmetric
(Nano)
Flat / Symmetric Flat / Asymmetric
(Nano)
Inserting Speed pcs/min 1000 1000 1500 1000 600
Minimum Dripper Distance cm 10 10 10 20 20
Perforator Type - Servo Servo Servo Servo Servo
Perforating Speed pcs/min 1000 1500 1500 500 500
Extruder Capacity Kg/h Servo Servo 
200 - 250
Servo Servo 
200 - 250
Servo Servo 
200 - 250
140 - 150 140 - 150
Winder Type - Automatic Automatic Automatic Automatic Automatic










View Complete Details

Round Drip Irrigation Pipe

Round Drip Irrigation Pipe Production Line


It is possible to produce Round Drip Irrigation Pipes in a fast, safe and controlled manner with Round Drip Irrigation Pipe Machine that is the work of advanced technology and experience.


Damla Plast, as usual, did not compromise the quality for this machine, established the principles such as high efficiency, easy to use, fast service, spare parts supply from stock and has offered these to our esteemed customer.



Throughout the project, for our esteemed customers working with us, solutions are created for preliminary examination, installation and commissioning, training, staff support, mold and other necessary equipments.

 
DRD - 100R DRD - 400R DRD - 500R DRD - 600R
Pipe Diameters mm 16 - 20 - 25 16 - 20 - 25 16 - 20 - 25 16 - 20 - 25
Pipe Wall Thicknesses mm 0,6 - 1,1 0,6 - 1,1 0,6 - 1,1 0,6 - 1,1
Maximum Working Speed m/min 37 70 80 125
Optimum Production Speed m/min 20 - 35 40 - 60 60 - 80 80 - 100
Inserter Type - Pneumatic Servo Servo Servo
Dripper Type - Round Round Round Round
Dripper Diameters mm 16 - 20 16 - 20 16 - 20 16 - 20
Inserting Speed pcs/min 100 225 600 800
Minimum Dripper Distance cm 15 15 15 10
Perforator Type - Mechanical Servo Servo Servo
Perforating Speed pcs/min 100 400 400 600
Extruder Capacity Kg/h 65 - 82 140 - 160 200 - 230 Servo - 230 - 280
Winder Type - Semi-Automatic Semi-Automatic Semi-Auto or Full-Auto 
(Optional)
Semi-Auto or Full-Auto 
(Optional)
Multilayers - Double Layers 
(A-B) (Optional)
Double Layers 
(A-B) (Optional)
Triple Layers 
(A-B-A) (Optional)
Triple Layers 
(A-B-A) (Optional)
 







View Complete Details

Hot Runner Systems

GNTHER Heisskanaltechnik GmbHis a well-known name and has their own niche in the market place with ground- breaking technical innovations with the highest standards of quality & precision.


GNTHER is often called as"Gunther is my supplier of choice"by the customers.


Gunther GmbH is the only company who satisfies demanding customized solutions. As a specialist, Gunther holds a number of patents to meet all the requirements.


The major benefits of Gunther Hot Runner Technology are:



  • Optimal temperature control

  • Uniform pressure distribution

  • Good gate quality

  • Side gating without "cold slug"

  • Cost effective manufacturing

  • High production reliability

View Complete Details

Filling Device High Pressure Compressor Accessories

Filling device
4 point panel - 2 x 200 bar, 2 x 300 bar with hose and DIN anti-whip connections


The wide range of L&W filling panels has established itself as an industry benchmark for optimum design with an extensive list of features. The modular design guarantees that filling stations can be extended to adapt to your future requirements. The panels are available with either 200, 232 or 300 bar filling pressure (3000/4500 psi) or as dual pressure filling panels for simultaneous filling without the need to select the pressure. The self venting lever operated filling valves are available with either filling hoses and connections or direct filling connections for BA cylinders. We have a wide range of filling connections available.

A unique feature of the L&W panels is the facility to swing open the housing for maintenance work, without any disconnections, a leak check can be carried out while the panel is open.

View Complete Details

Storage Tanks Compressor Accessories

Storage tanks are frequently used to provide extra filling capacity during peak periods. The storage cylinders can either be opened all at once" in a single stage, or cascaded" into the cylinders to be filled, usually in 3 stages. Ideally the storage pressure should be higher than the filling pressure, 300 bar storage systems are the most common. The storage systems can be used with most compressors and are best suited for automatic operation (e.g. ECC or auto start option). L&W has a full range of storage modules each of which can be combined with other modules for individual configuration.

View Complete Details

Filling Connections Compressors


Filling Connections


Filling connections for SCBA and diving cylinders in accordance with national/international standards.



View Complete Details

Safety Valves Compressors


Safety Valves


Safety valves are available for various pressures, either securing the final pressure on HP compressors and installations or preventing damage to inter stage or low/medium pressure components.



View Complete Details

Pressure Switches And Sensors


Pressure switches and sensors


A wide range of analogue pressure switches and electronic pressure sensors is available suitable for pressures between 0 and 600 bar.



View Complete Details

Inlet Filters


Inlet filters


Various inlet filters are available for the different sizes of compressors, the inlet filter cartridge is a low cost component that plays a significant role in protecting the compressors, a clean cartridge also ensures the efficient operation of the compressor.



View Complete Details

Trimix Gas Blending Panels

Using the partial pressure method, Nitrox and/or Trimix can be mixed and filled safely, easily and accurately using our Pro or Classic filling panels. The panels are tested and certified for 100% oxygen and/or helium mixing for all your breathing gas requirements. Practical valve and gauge layout makes operation easy to learn and use.


For pure oxygen compatible air (OCA), we recommend using the Puracon air controller and/or an extra filter mounted on the panel.


Wall mounted panels for safe and easy partial pressure gas blending. All gas inlets are fitted with isolation valves, non return valves and flow restrictors. The oxygen/helium gas pressure can be read on individual pressure gauges without the need to open the valves which makes efficient gas cascading quick and simple. The design of the panels has been approved by the stringent German TV authorities as suitable for use in Nitrox, Trimix and Heliox applications.


The Panels have a removable rear cover which makes wall mounting very simple and are powder coated in RAL 6026. All the pipework and the connections are stainless steel providing years of trouble free service and safe gas flow. The valves are industrial quality.

View Complete Details

Air & Gas Purification

Filter capacity and filter life, an important theme with financial implications for professional filling stations where cost control is vital. The life of a filter is strongly influenced by the running temperature of the compressor and ambient temperature.


Example: LW 450 E at +20C outlet temperature has a filter life of approx.33 hrs, at +35C this time is reduced to just 10 hours!. If the air is cooled down to +3C after the final compression stage before it enters the final separator, the life of the filter cartridge can be extended up to 6 times, in extreme tropical conditions 10 times!


The L&W refrigeration dryers, named Air Coolers, can pay for themselves within 1 season in saved filter cartridge costs. To monitor the exact state of the filter and register when the cartridge needs changing, we recommend the L&W Puracon moisture controller.


For some industrial applications, the air cooler can provide suitable drying without the need for filters. The coolers are available as independent units with water separators, automatic condensation drain with timer and silencer, or as the economical. LW Air Cooler BASIC for connection to a compressor with final stage oil/water separator and drain.

View Complete Details

Lab Extrusion Machines

HARDEN INDUSTRIES LTDis an industrial group specializes in the design and manufacturing of plastic processing equipments.


POTOP is one of their brands which focus on design and manufacturing laboratory extrusion machines. They are capable of providing various customized solution for rubber-plastic processing and property test. With more than 10 years experience, they have successively developed a lot of patent product such as "fish-eye tester, master batch dispersion tester, lab precision cast film extrusion line, lab precision blow film extrusion line, polymer MDO/BO film stretching machine, triple screw compounding extruder, and 1.5 screw compounding extruder, etc.


The products are advanced designed, high precision and high stable with reliable and instant after-sales service. The customers range from international companies such as 3M, LABTECH, ZTE, European Plastic, Green Field, Heat Trap, Dongfang Steam Turbine, Yanshan Petrochemical, China Weapon Industry Group, etc. to lots of universities such as Sun Yat-sen University, South China University of Technology, Guangdong University of Technology, Shanxi University of Science and Technology, Xian Polytechnic University, East China University of Science and Technology, Changzhou University, etc.


Torque Rheometer
Product specifications



  • Measuring condition is close to actual production

  • High precision measurement can recognize subtle changes in structure and ingredients

  • Integrated frame saves much space

  • Easy to operate, disassemble and clean

  • Mechanical-electro double overload protection device

View Complete Details

Extrusion Capillary Rheometer

Product specifications



  • High precision temperature and pressure transducers

  • Mechanical and electro double overload protection device

  • High precision electronic balance

  • Swift screen changer saves much time

  • Space saving integrated frame


View Complete Details

Lab Banburying Module

Product specifications



  • Measuring condition is close to actual production

  • High precision measurement can recognize subtle changes in structure and ingredients

  • Modula design makes the unit easy to operate, load and clean

  • Mechanical and electro double overload protection device

View Complete Details

Lab Single / Twin / Triple Screw Extruder

Product specifications



  • The structure of the gear transmission box is optimized by CAE software

  • By rearranging block barrel and screw combinations according to the processing characteristic of specific material, it is available to process various materials

  • Swift screen changer makes cleaning much easier

  • Import core parts are adopted in the vacuum exhaust and cooling device and guarantees the stable

View Complete Details

Lab Precise Single Screw Extruder

Product specifications



  • Screws of high machining accuracy are made by the domestic famous professional screw manufacture Huaye

  • Nord variable frequency motor ensures accurate rotate speed of the screw

  • High strength aluminum alloy transmission gear box and cone small roll thrust bearing brings a stable operation

  • Independent temperature control funs

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • Removable stainless steel made hopper

View Complete Details

Lab Precise Cast Film Unit

Product specifications



  • Nord variable frequency driving motor ensures accurate rotate speed of the screw

  • Chrome coated and mirror polished roll surface produce a much fine sheet

  • The anticathode oxidation treated aluminum alloy flatten roll

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Lab Precise Three Roller Calendar

Product specifications



  • Three independent diving rolls enhance the adjustment flexibility

  • Nord variable frequency driving motor ensures accurate rotate speed of the screw

  • Chrome coated and mirror polished roll surface can produce a much fine sheet

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop


View Complete Details

Lab Precise Film Stretching Machine

Product specifications



  • Preheat roll, drawing roll, annealing roll, chill roll are all controlled by independent servo motor

  • The space between drawing roll is adjustable, weakening the necking effect

  • The die machine and conduction oil are chosen for temperature control

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Lab Precise Multi-function Film Processing Machine

Product specifications



  • Integrating casting, drawing, traction, unwinder into one

  • Equipped with casting roll lifting mechanism and adjustable die lips

  • The die machine and conduction oil are chosen for temperature control

  • All rolls are driven independently by International brand servo motor

  • The space between stretch rolls is adjustable

View Complete Details

Lab 1.5 Screw Compounder

Product specifications



  • The auxiliary screw exists along the feeding port only and the tablets on auxiliary screw pressure materials into the main screw channel

  • Nord variable frequency driving motor and reduction box ensure accurate rotate speed of the screw

  • High strength aluminum alloy transmission gear box and cone small roll thrust bearing brings a stable operation

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Lab Twin / Triple Screw Compounder

Product specifications



  • Parallel two/three axis type high speed and high sexual transmission box is adopted and the integrated main transmission and torque distribution makes a compact structure

  • Nord variable frequency motor and reduction box ensure accurate rotate speed of the screw

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Compounding Extrusion Lines

With more than 10 years experience in plastic machinery industry, Harden Technologies Ltd. is specialized in developing, manufacturing and marketing a range of plastic extruding for compounding, recycling and pelletizing, and relevant auxiliary equipments. SAN-U is one of brands under the Harden umbrella.


Working together with some world best suppliers, SIEMENS, MITSUBISHI, B&R, SCHNEIDER, RKC, ABB, etc., they provide the customers with high quality extrusion equipment with affordable price.


Equipped with several advanced processing and inspecting machinery imported from Japan and UK, they can supply reliable spare parts and components which guarantee their service and support.


HARDEN production program includes:
Plastic Extruder



  • High Speed Single Screw Extruder

  • Co-Rotating Twin Screw Extruder

  • Counter-Rotating Twin Screw Extruder

  • Two Stages Extruder

View Complete Details

Extrusion Lines For Foils

Extrusion lines for foils, sheets and multicellular panels
AMUT applies more than 50 years experience in plastic sheet extrusion to offer its Customers complete and technologically advanced lines to produce foils and sheets from a wide range of thermoplastic materials, to be used for a large number of different applications.
The AMUT production range includes extrusion lines with nominal width from 400 to 3300 mm and thickness from 150 microns for foils up to some centimeters for sheets or multicellular panels.
The number of co-extruders is defined depending on the specific needs of the customer and the characteristics of the finished product. Using the AMUT extrusion lines, sheet configuration up to 9 layers and output capacity over 4000 kgs per hour can be obtained.


Food Packaging
Sheet for thermoformed food packaging, with and without barrier layer. Layers can be co-extruded or laminated for airtight seal. They can be treated for printing or metalizing. Specialty execution for form fill-seal automatic lines.
Materials: PET, PS, PE, PP, EVA, EVOH.


Multipurpose and Pharmaceutical Blister Packaging
Sheet for thermoformed packaging for consumer goods display, for medicine tablets or capsules blister, treated for the hermetic seal welding or bonding.
Materials: PET, PVC.


Paper & Cardboard Industry
Sheet and foils for stationery items (binders, folders, catalogues, files) or gift, cosmetic and perfume boxes packaging. Single or multilayer foils, with surface embossing and treatment for printing, cut and stacked in reams for further process.
Materials: PET, PP, PVC.


Waterproofing
Waterproofing membranes for building industry and civil infrastructure (protective covering, flat roofing, tunnels and subways, train track and roadway beds, bridges). Single or multilayer membranes, with inner reinforcement and fleece bonding for support, surface embossing and aesthetic finishing. Specialty execution for dimple or deep-drawing membranes to insulate the concrete foundations from soil.
Materials: F/PVC, TPO, HDPE.


Furniture Industry
Single or co-extruded sheets for panels covering of domestic furniture, mostly kitchens. Also for edge bands production, with wood grain surface embossing, primer coating, printing with UV drying system.
Materials: ABS, PMMA, PVC, PP.


Refrigerator Industry and Bathroom Furnishing
Single or co-extruded sheets to be thermoformed for refrigerator doors or bathroom furnishing such as shower pans, basins, bath tubs, corner shower fittings. Surface treatment for foam application, bright and glossy finishing. Automatic cutting and stacking.
Materials: PS (HiPS and GPPS), ABS, PMMA.


Medical Bags
Non-toxic foils for medical bags to be used for transfusion, dialysis or phleboclysis. Glazing or embossing surface finishing, to prevent foils from adhering during the sterilization cycle in autoclave.
Materials: PVC, PP.


Multicellular Panels
Polypropylene Cartonplast for stationery items.
Single or multi-chamber Polycarbonate panels for the building industry.
Materials: PP, PC.


Photovoltaics
Foils for the encapsulation of silicone modules used in solar panels production. Embossing finishing and in-line cross-linking treatment, partial or total.
Materials: EVA.


Automotive
Foils and sheets for large application in this field.
Sound deadening sheet for engine compartment, sheets bi-laminated with nonwoven layers for interiors (passenger and trunk compartments), co-extruded sheets to be thermoformed for car door covering.
Materials: PP, TPO, PVC.


Speciality Execution
Many different special applications, among which:



  • Corrugated sheet, co-extruded from LDPE foam, for the industrial packaging of bulky products (coils, plates, stainless steel pipes, etc.)

  • Transparent sheet for hobby works and bricolage, extruded from PS crystal (GPPS)

  • Flexible sheet for gaskets or sealing units, extruded from fluoropolymers (PFA, PVDF, Teflon)

  • Foil for artificial leather, table cloths, industrial curtains and room partitioning, extruded from Flexible PVC

View Complete Details

CPP & Stretch Film Lines

  • Gravimetric groups, continuous or batch type, up to 6 hoppers for each extruder Specific design for PP resins: 55 – 65 – 75 – 90 – 105 – 120 – 150 – 160 – 180 DEKC
  • 30 - 32 - 35 Variable or fix geometry feed block Automatic extrusion die with internal deckling system
  • Dual-type Automatic control system with following choice of sensors: -Infrared -X-ray
  • Automatic turret winder Automatic turret winder with independent arm In-line reprocessing systems
  • Operator friendly line supervisor model logicontrol 2.0 In-line multislit system Annealing section

AMUT DOLCI BIELLONI offers a wide range of cast line for the production of Polipropilene film (CPP), equipped with:



  • New barrier low shear design to improve melt quality and reduce energy consumption, specifically designed for Polipropilene resins

  • Optimal L/D ratio for perfect melt quality production

  • Heaters bands for quicker heating and lower energy consumption

  • Vector motors, lower power consumption

  • Reduced length of connection necks between extruders and feed block

  • Cast extrusion die with "positive inclination on the chill-roll

  • Trims reprocessing unit with compactor and forced feeder


The result of the abovementioned features is low power consumption per kg of film produced.

NET WIDTH NUMBER OF LAYERS OUTPUT
1200 mm 3 Up to 350 kg/h
1600 mm – 1800 mm – 2100 mm 3 Up to 500 kg/h
2400 mm 3/5 Up to 1000 kg/h
2800 mm 5 Up to 1200 kg/h
3000 mm 5 Up to 1000 kg/h
View Complete Details

Single Stage Extrusion Coating Lines

Single stage extrusion coating lines for the production of coated paper, coated non-woven/woven webs for food packaging, industrial application and disposable items.


Single stage extrusion coating / laminating lines for the production of paper / PE / alufoil webs or BO films / PE / Metallized BO films for pharmaceutical, cosmetic, industrial or general applications.


Double stage extrusion coating / laminating lines for the production of complex-multicoated webs for pharmaceutical, cosmetic, food pack, industrial, sanitary and insulation industry.


Tripe stage extrusion coating / laminating lines for the production of multilaminated paper board for UHT aseptic (liquid) packaging.


Production Range:
Line width: from 800 to 2500 mm
Line speed: up to 200 or up to 500 m/min
Rolls diameter: from 800 to 1600 mm
Extrusion dies: Non-automatic or automatic with external or internal deckling system
Extruders size: from 55 to 180 mm
Range of up-stream / downstream accessories: Corona or flame treater, ozonizing bars, reversing bars, primer stations, single or differential gauge controls, in-line flexo printing stations, in line creasing stations, video camera and web inspection instruments.
Type of unwinders: semi-automatic or automatic turret type (flying spice), butt-splicers shafted or shaftless


Type of rewinders: contact type or automatic turret type with in-line multi-slit station, shaftless or shafted

View Complete Details

Helical Wound HDPE Pipe

PE Pressure & Non Pressure Structured Wall Pipes up to 4000mm
Krah AG, the German machine manufacturer, has developed a complete production line to produce pressure pipes in diameters ranging from DN/ID 300mm to DN/ID 4000mm made of a compound of polythelene reinforced with fibres to unite the well-known properties of thermoplastics with the significant characteristics of fibers.


The machine is designed similar to the well established KR Series production machines, applying the winding process to produce pressure pipes up to 10 bar working pressure. Moreover it can be upgraded to the characteristics of the conventional KR Machine, so that now one single machine, the so called KDR machine, is able to produce structured wall Non-Pressure Pipe Systems as well as solid wall PE-GFR Pressure Pipe Systems.


However, the equipment is not only designed to manufacture the pipes themselves, but it is able to produce an integrated electro fusion joint and the complete range of fittings for pressure as well as non-pressure applications.


High production output, enormous flexibility, short setup and change over times, simple operation, a perfect joint and more application facilities for the products are the main characteristics of all Krah machines.


Moreover, the customer decides which pipe diameters are needed to satisfy the market requirements and he purchases only the necessary production tools for these pipe diameters. This allows the customer the optimum choice of equipment with the possibility to upgrade the equipment later by purchasing production tools in other diameters. Such an upgrade does not require any modifications to the machine. Furthermore every pressure class can be produced without the necessity to invest in further dies or special tools.


Various formulations of high density polyethylene (PE 63, PE 80, PE 100) can be used to produce the requested end product, thus providing all positive characteristics compared to other stiff pipe materials like concrete, steel, etc.


The DR Series is designed to produce, in the most economical and ecofriendly way pipes, fittings and manholes in diameters ranging from DN/ID 300mm to DN/ID 4000mm and in lengths from 1m up to 6m and on special request even longer, 6m pipe length has become a standard length because of their easy to transport and handling.

View Complete Details

Re-conditioned Extrusion Lines

Next GmbH is a sister concern of Graewe GmbH, Germany. Pipe ExtrudersFor over 25 years they have provided some of the best Preowned reconditioned machines for extrusion from well renowned brands like Battenfield, Weber, Cincinnati, Kraussmaffei etc. With over 4000 sold used extrusion equipment, they are among the leading suppliers for extrusion machines.


Machines from next stand for quality, reliability and expertise



  • Quick availability Moderately Priced

  • Completely over hauled


Product range



  • Complete Line for Pipe and Profile Extrusion

  • Single and Twin Screw Extruders

View Complete Details

PET Bottles Recycling Lines

The quality of the PET flakes manufactured by the AMUT recycling technology is almost comparable to the virgin PET:



  • The glue residuals are almost absent

  • PVC and floating material are reduced to the minimum

  • The organic residuals are traced between 0 and 70 ppm

  • Residual of soda is insignificant, as confirmed by the measurement of pH rise



The above performances enable AMUT to obtain a material free of black specks, with Colour b and delta Colour b that make it suitable not only for fibers, but also for more complex applications, such as:



  • Bottle-to-Bottle

  • Bottle-to-Packaging

  • Strapping where the final product requires a subsequent degradation treatment



Standard plant sizes (output): 500, 1250, 2000, 2500, 3000, 4000 kg/h
Flexibility
The plants are supplied on a turnkey basis or according to the customerBottle-To-Bottle requirements. Thanks to the modular construction, the plant can be installed both into existing buildings and new projects. Therefore it is also possible to integrate the modular units for bottles pre-washing and flakes washing into the existing plants.

View Complete Details

Industrial Tire Recycling Shredders

  • Country of Origin India
  • Type Tyre Recycling Machine

A complete ZERMA tire recycling system consists of 5 main components



  • The ZXS Pre-shredder shreds the complete tires down to a size of around 150 mm

  • The ZTTS Intermediate shredder cuts the tires down to a size of

View Complete Details

Vertical Injection Moulding Machine

V-S Series


Clamping Force:35-250Ton




  1. Vertical clamping, vertical injection, easy to insert

  2. S-single slide table (1 upper mold, 1 bottom mold)

  3. In-Out table design, more convenient.

View Complete Details

Blown Film Lines

  • Gravimetric groups, continuous or batch type, up to 6 hoppers for extruder 45 - 55 - 65 - 75 - 90 - 105 - 120 - 150 - 160 - 180 DEKC; L/D 30 - L/D 32
  • Multisplit type  Pancake multilayers Dual lip type ring, automatic rings, stationary or rising-type IBC (internal bubble cooling)
  • With ultrasonic sensors for IBC, with no scratch contact guiding sleeves 3600C oscillating on air cushion rolls Net width up to 3500 mm Gusseting systems and water cooling systems
  • Single station, back-to-back or front-to-front configuration Contact, axial, gap or reverse winding Reels diameter: 800 - 1000 - 1200 mm (up to 2000 for heavy duty sacks) Operator friendly line supervisor, model "Logicontrol 2.0"

With AMUT DOLCI BIELLONI extrusion lines synergically conceived with the clients, several products of daily use are obtained: carrier bags, refusal sacks, thermoshrinkable film, stretch hoods, stretch films, bags for vacuum/ controlled atmosphere food packaging, film for diapers, coextruded film for the most diversified packaging applications and for agrifilm.


Co-extrusion lines from 3 to 9 layers structures with different level of automation, including:



  • Gravimetrics for resins and recipes

  • Automatic cooling rings for accurate film thickness control

  • Automatic manipulators for shaft, rolls and cores handling

APPLICATIONS WIDTH (Layflat) NUMBER OF LAYERS THICKNESS RANGE
Film for heavy duty bags 800 -1000 mm 1/3 40 - 180 µ
Quality technical films for food packaging and general applications 1200 - 1400 - 1600 - 1800 - 2000 -2200 mm 3/5 20 - 250 µ
Barrier films (for gas barrier and non-gas barrier film for food vacuum packaging and technical applications) 1300 - 1600 mm 5/7/9 25-200 µ
Blown stretch wrap film and Agristretch film 1800 - 2250 mm 3/5 15 - 35 µ
View Complete Details

Laminating Machines


Julia Super Star


Outstanding features:



  • Being the laminating station located on the opposite side of the glueing section it results very close to the unwinder of the material to be laminated. This particular configuration facilitates and optimizes the lamination of delicate webs such as thin alu-foil at very high speed;

  • The maximum machine speed is up to 450 m/min (1300 fpm);

  • All electrical and electronic components are confined inside of a cabinet which is part of the machine body for easier wiring and maintenance;

  • Very precise tension controls due to selected electronic components;

  • Easy and quick change of the transfer roll because of pneumatic sleeve and cantilevered mandrel;

  • Optional shaftless unwinders and rewinder lifting and/or releasing the rolls directly on the floor;

  • Thick and ribbed cast frame (80 mm) for the highest machine stability at top speed;

  • Very precise two components glue mixing and metering of brand new design.


Technical data:



  • Coating width: mm 1200 (47") - 1400 (55") - 1600 (63")

  • Production speed: up to 450 m/min

  • Frame thickness: 80 mm (3, 1")

  • Transfer cylinder: on cantilevered mandrel

  • Max. Diameter of unwinding reels: up to 1.300 mm (51")

  • Max. Diameter of rewinding reel: up to 1300 mm (51")



View Complete Details

Solar Line Extrusion

  • Width 1.050 - 2.100 mm
  • Materials EVA, TPU
  • Thickness range 0, 3 - 0, 8 mm

EVA, Ethylene-Vinyl-Acetate, is the type of material produced with AMUTs extrusion foil line and it is especially reserved for the production of solar-photovoltaic panels.
EVA foil protects the photovoltaic cell, encapsulating and wrapping the silicon cells, and enables a perfect sealing and a high adherence with the outer glass sheet and with the back-sheet (lower layer).


The EVA foil delivered with AMUT lines assures:



  • The maximum light transmission;

  • The absence of deformations or shrinkages;

  • A great capacity to achieve a good cross-linking level (necessary to end the panel lamination very quickly);

  • The satisfaction of TV or CEI EN 50086 certificates requirements.


All units of the line are purposely designed for this application and to not compromise the foil dimensional stability.


There is not cross-linking during the extrusion process.


The innovative winding system can wind-up, directly in-line, the foil in reels or permit to laminate in-line a separating film sheet (mask film) or a silicone paper foil to protect EVA foil completely.

View Complete Details

Medical Tubing Extrusion

Materials:PVC, PP


The output satisfies the medical industry requirements: dimensional precision, reduced tolerance in production, clear or mat surface and absolutely no contamination allowed.


According to diameters, thickness, geometry and production that customer requires, the extrusion lines for medical tubing count on different models of extruders and heads.


A perfect calibration is ensured inside the vacuum tank, where a modulating control interacts with diameter measuring system, adjusting the vacuum if necessary.


Water immersion cooling tunnels are sized in length depending on the throughput required and are closed type to prevent any possible contamination. Process water is filtered using a special filter to ensure its purity.


Finished product is rolled up on cantilever reels, to avoid contact with floor while the reel is automatically changed by the system. Winding system is controlled by a non-contact sonar device, to prevent tension on tubing while the reel is forming.

View Complete Details

Washing Lines

Output:from 500 up to 6000 kg/hContinuous process, not based on batches, with a substantial saving of water.



The flakes produced are suitable for the following applications:


Bottle to Bottle


Bottle to Packaging


Bottle to Fibres


Bottle to Sheet


Bottle to Strapping

View Complete Details

Second Hand Extrusion Machines

Next Machines offer over 400 extrusion machines and downstream machines made by GRAEWE and other manufacturers.


Tested quality from the market leader:


Ensure Tender, advice and quality check in all respects when purchasing extrusion machines. Assured that the wear parts of every machine have been renewed and the most important aggregates have been overhauled or replaced, this means tested quality from the market leader.



Large choice and fast availability:


The extrusion machines form an important part of process cycle. An unexpected failure can have grave consequences for production. To prevent this, one of the mainstays of our range of services is fast availability. From a range of more than 400 extruders and extruder downstream equipment, select the type that is exactly tailored to your purpose at a reasonable second-hand price.This will make decision-finding process easier for projected purchases. For us it is important not to deliver the extrusion machine before the machine has been submitted to an all-inclusive professional inspection, to a thorough servicing, and not before any repairs that were required have been completed.



Our Service Comprises, Among Other Points:


Overhaul, respectively replacement of screw and cylinder


Replacement of melt pressure and temperature sensors


Replacement of the sealing packages and gas removal pumps


Replacement of heaters


Overhaul of the motor


Checking of the gears


Gear oil change


Oil filter change


Replacement of the V-belts



Our Special Next Service Comprises:


Finishing customized to clients colours


Trial run


Recording of the output capacity.



Universal experience for individual solutions:


Over the past 20 years Next Machines sold well over 4000 second-hand extrusion machines and have become an established market leader in this market segment.


Every single installed system differs a little from the next - and all the experience and know-how gathered over the past two decades will flow into an individual solution for your special requirements. And, because the special details often become so very important, it shall be our pleasure to invest some more time in consultation and advice.


To get notification and updates on New Second Hand Machines simply fill in the form given below. You will receive appropriate details in your inbox shortly.

View Complete Details

Compounding Extruder

Compounding extruder is a counter-rotating parallel twin screw extruder, which is different from those popular conical twin screw extruder used in PVC compounding and extruding industry.The technology of this PVC compounding extruder is advanced and solves the quality problem due to the narrow anti-temperature range of the stabilizer.



This high performance PVC compounding extruder could achieve good mixing and blending effect. With the same diameter of the screw, the counter-rotating parallel twin screw PVC compounding extruder has higher output than that of traditional two screws PVC compounding extruder. Configured with processed gearbox, this PVC compounding extruder is durable and easy to maintain.

View Complete Details

3D Filament Extrusion Line

Harden is well established in design and building extrusion lines for polymer processing since 2006. The company has always been leading the industry in developing precision small extrusion lines and laboratory extrusion equipment. As FDM technologies is being becoming popular, Harden set up a subsidiary specialized in supplying 3D printing filament production lines.



Product Application-3D Printer Filament Extrusion Line


3D printing filament production lines are available in three functionality options and a desk-top version is also available for small lab scale production and testing.


HARDEN is dedicated to provide the best small extrusion lines and service for you from China. Our extruders are famous for its melt quality, pressure stability, zero down time, easy operation, and short start-up time. With these features, customers get an advantage of high production rate, high product precision, and very low rate in material waste.



Main Features of 3D Printer Filament Extrusion Line:



  • Using SIEMENS touch operation, real-time display of the running state, alarm information and system parameters

  • PID temperature control, the accuracy up to 1

  • Pressure closed loop control is used to improve the stability of the extrusion pressure and the uniformity of the 3D printer filament

  • The traction unit using imported servo motor drive and is composed of the closed-loop control system with diameter measuring instrument, which can quickly respond to the change of the speed of the extruder, so as to achieve the requirement of the accuracy

  • The use of special winding tension transducer, to ensure the tension balance, rolling smooth and tidy, to avoid the phenomenon of knot

  • Remote monitoring can be achieved for you to build an intelligent automatic to provide convenient conditions

Description  Unit  TSI-35  TSI45
 Screw Diameter   mm  Φ 35  Φ 45
 Length Diameter Ratio  L/D  28 28 
 Speed rpm   0-107  0-107 
 Pulling Speed  m/min  0-150  0-150
 Max. Output  Kg/h  20  30
 Diameter   mm  Φ 1.75/Φ 3.00  Φ 1.75/Φ 3.00
 Accuracy  mm  ±0.01  ±0.01
 Power of Motor  kW  7.5  15
 Total Power  kW  38  45
 Storage Capacity  m 100   100
 Dimensions  mm  9579*1513*2393  9579*1513*2393
View Complete Details

Pipe Saws Machine

315mm (weight 1, 000 kg); 380 volt 3 phase 50 Hz (2.25 kW)
630mm (weight 1, 900 kg); 380 volt 3 phase 50 Hz (3.7 kW)
800mm (weight 2, 300 kg); 380 volt 3 phase 50 Hz (3.7 kW)
1200mm (weight 6, 000 kg); 380 volt 3 phase 50 Hz (6.25 kW)
1600mm (weight 7, 000 kg); 380 volt 3 phase 50 Hz (9 kW)
67 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees
Angular cutting error equal to or less than 1 degree
Speed of saw blade 250 m/min

View Complete Details

Saddle Fusion Machines

Features:



  • Suitable for fabricating PE reducing tee in a workshop. Integrated function of welding and taping enables to complete the whole fabricating process

  • Removable PTFE coated heating plate

  • Separate two-channel timer records times in soaking and cooling phases

  • Digital high-accurate pressure meter indicates clearer readings

  • Linear guide ways are equipped with heating plate and dragging plate



Specifications:



  • Working Ranges: Reducing tee

  • Main Pipe Max. Diameter: 630mm/800mm/1000mm/1200mm

  • Branch Pipe Max. Diameter: 315mm/400mm/500mm/560mm

  • Heating Plant Max. Temp: 270

  • System Pressure Ranges: 0-16Mpa

  • Working Voltage: 380V, 50HZ

  • Heating Plate power: 812KW

  • Hydraulic Unit Power: 1.5KW

  • Drill Motor Power: 1.53KW

  • Total Power: 1116.5KW

  • Weight: 1900KG


View Complete Details

Downstream Equipments For Extrusion

Graewe products stand for high productivity, low operational, maintenance and service costs and shorter delivery time.


Vacuum, calibration and cooling tanks



  • Belt and caterpillar haul-off

  • Adjustable pressure for delicate hoses and profiles

  • High Precision driven via AC servo drive

  • Cutting units

  • Cutting Saw and Planetary Saw

  • Cutting and Chamfering machines, servo cutters


Automatic Winders



  • Driven by maintenance free AC servomotor

  • Precise traversing

  • Automatic feeding

  • Automatic change-over

View Complete Details

Saba 6 SLV (Gear Presses)

Features:



  • C.I. Dum 1410 Mm - Chrome Plated

  • Horizontal-Sequential Throw-Off

  • Automatic In-Register Pre-Setting

  • Frame And Decks Thickness 100 Mm

  • Pneumatic Locking

  • In And Out Motorised Decks

  • Automatic Turret Rewinder

  • Extended Drying

  • Three Automatic Tension Controls


Technical Data:



  • Number of decks 6

  • Type of inks : solvent based

  • Useful printing width (max) : mm 800 (31, 5") - 1000 (39") - 1200 (47 3/4 ") - 1400 (55")

  • Web widht (max) : mm 920 (36") - 1120 (44") - 1320 (52") - 1520 (60")

  • Minimum print repeat : 340 mm (13")

  • Maximum print repeat : 1050 mm (41")

  • Maximum mechanical speed : 280 m/min

  • Central Drum Diameter : 1410 mm (55, 5")

  • Print Structure thickness : 100 mm

  • Anilox Cylinder diameter : 127 mm (5") - 150 mm (6")

  • Rack in out of each printing station : motorized

  • Longitudinal register : motorized

  • Horizontal register : motorized

  • Sequential Trough off : Yes

View Complete Details

Telia FSC (Gearless Presses)

Telia 8 FSC is the latest development of the FSC (Fast Sleeve Change) system applied to our gearless technology.


Main features:



  • Totally interchangeable printing decks with identical mechanical components for each deck to simplify maintenance;

  • Dual high precision linear guides;

  • Step-by-step motors to repeat every position previously recorded;

  • New self-cleaning pneumatic doctor blade chamber;

  • "FSC" system for sleeve change and rapid deck opening with horizontal movement;

  • Integrated automatic deck wash-up system;

  • Air Recirculation Bridge to increase drying efficiency;

  • Motorised bridge threading and passage;

  • Pressure and register remote control;

  • Electrical equipment in climate controlled container.


Technical Data:



  • Number of decks : 6/8/10 with or without in line roto or flexo units

  • Useful printing width : up to 2.200 mm (87")

  • Anilox and plate cylinder : sleeve type

  • Minimum print repeat : 300 mm

  • Maximum print repeat : 900 mm

  • Mechanical speed : 500 m/min

View Complete Details

Telia Maxi (Gearless Presses)

Telia Maxi is the latest development of the FSC (Fast Sleeve Change) system applied to our gearless technology.


Main features:



  • Totally interchangeable printing decks with identical mechanical components for each deck to simplify maintenance;

  • Dual high precision linear guides;

  • Step-by-step motors to repeat every position previously recorded;

  • New self-cleaning pneumatic doctor blade chamber;

  • "FSC" system for sleeve change and rapid deck opening with horizontal movement;

  • Integrated automatic deck wash-up system;

  • Air Recirculation Bridge to increase drying efficiency;

  • Motorised bridge threading and passage;

  • Automatic Pressure and register control system;

  • Electrical equipment in climate controlled container.


Technical Data:



  • Number of decks : 6/8/10

  • Useful printing width : up to 2.800 mm (87")

  • Anilox and plate mandrels : carbon fibered

  • Minimum print repeat : 350 mm

  • Maximum print repeat : 1.100 mm (43") - 1.250 mm (49") - 1.400 mm (55")

  • Mechanical speed : up to 450 m/min

View Complete Details

High Speed Mixers

With more than 10 years experience in plastic machinery industry, Harden Technologies Ltd. is specialized in developing, manufacturing and marketing a range of plastic extruding for compounding, recycling and pelletizing, and relevant auxiliary equipments. SAN-U is one of brands under the Harden umbrella. Working together with some world best suppliers, SIEMENS, MITSUBISHI, B&R, SCHNEIDER, RKC, ABB, etc., they provide the customers with high quality extrusion equipment with affordable price.


Equipped with several advanced processing and inspecting machinery imported from Japan and UK, they can supply reliable spare parts and components which guarantee their service and support.


HARDEN production program includes:
Plastic Auxiliary Machinery



  • Vertical High Speed Heat Mixer

  • Vertical Cooling Mixer

  • Vibrating Sieve

  • Centrifugal Dryer

  • Two Roller Mill

View Complete Details

Vertical Cooling Mixer

Our vertical cooling mixer has good function in storage, drying, cooling and even Vertical Cooling Mixerspreading. Double layer cooling cover is available upon customers requirements.


Main Features of Vertical Cooling Mixer



  • Direct driven decreases the rate of maintenance

  • Boiler with interlayer is good for heat conduction

  • Stainless steel cover is convenient to open and close

  • Polished interior wall of boiler is easy to clean

  • Unique cooling function of the cooling cover can enhance the processing capacity

View Complete Details

Vibrating Sieve

Our vibrating sieve can be used to separate materials into various sizes for further processing.


Main Features of Vibrating Sieve



  • High efficiency

  • Compact and durable design

  • Easy to change screen, operate and to clean

  • Automatically discharge impurities

  • No mechanical operation, easy to maintain

  • Can be used as single or multi-layer

  • Stainless steel for whole unit

View Complete Details

Centrifugal Dryer

This vertical centrifugal dryer is made of stainless steel. It is suitable for washing and dewatering Centrifugal Dryerof plastic films, scraps and granular material.


Main Features of Centrifugal Dryer



  • High degree of dehydration

  • Saving energy

  • High efficiency

  • High degree of automation

  • Easy to clean-up

  • Low noise

  • Safe

View Complete Details

Pulverizer Machine

PM
One of the main fields of use for the ZERMA PM Pulverizers is the pulverization of PVC regrind in pipe and profile recycling. Working in line with a shredder and granulator to have a balanced and efficient system to handle in house production waste. Another application is the grinding of PE for Rotomolding applications, here the PM Pulverizer is used in the production process to create the powder needed in the process.


Advantages of the PM Pulverizers



  • Simple adjustment of cutting gap

  • Choice of discs or segments

  • Low drive power

  • High throughput

  • Innovative efficient design

  • Wide range of accessories

  • Easy temperature control

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ramesh Parasuraman (Allied Solutions (I) Pvt. Ltd.)
  • 313/314, Raikar Chambers, Govandi [East], Mumbai, Maharashtra - 400088, India
  • Share us via
Drip Irrigation Lines Filling device High Pressure Compressor Accessories from Mumbai, Maharashtra
Post Buy Requirement
AS
Mumbai, Maharashtra, India
Add Review

Our Products

  1. Machines And Equipments 5 Products available
  2. Industrial Machinery 4 Products available
  3. Welding Machinery 3 Products available
  4. Crusher, Shredder & Presses 4 Products available
  5. Air Compressor 4 Products available
  6. Roll Forming & Bending Machines 7 Products available
  7. Others 87 Products available

Other Products / Services

Drip Irrigation Lines

Symetric And Nano Flat Drip Irrigation Pipe Production Line


The creation of highest level technology and experience Damla Plast Flat Drip Irrigation Pipe Line can produce flat irrigation pipes which is the new shining star af irrigation systems in a safe and fast way while all operations are under control. There are special systems in the machine that allows you to make production of different diameter and net thickness and this system will provide the best diffusion between pipes and drippers, will check the accuracy of drilled holes and will detect errors on the product such as rupture.


Damla Plast, as usual, did not compromise the quality for this machine, established the principles such as high efficiency, easy to use, fast service, spare parts supply from stock and has offered these to our esteemed customer.



Throughout the project, for our esteemed customers working with us, solutions are created for preliminary examination, installation and commissioning, training, staff support, mold and other necessary equipments.

 
DFX - 1000F
Premium
DFX - 1000F
Premium Plus
DFX - 1500FC
Nano
DFX - 500F
ECO
DFX - 500FC
ECO Nano
Pipe Diameters mm 16 - 22 - 25 16 - 22 - 25 16 - 22 - 25 16 - 22 - 25 16 - 22 - 25
Pipe Wall Thicknesses mm 0,15 - 0,60 0,15 - 0,60 0,15 - 0,60 0,15 - 0,40 0,15 - 0,40
Maximum Working Speed m/min 200 250 250 150 150
Optimum Production Speed m/min 160 - 180 200 - 220 200 - 220 120 - 125 120 - 125
Inserter Type - Servo Servo Servo Servo Servo
Dripper Type - Flat / Symmetric Flat / Symmetric Flat / Asymmetric
(Nano)
Flat / Symmetric Flat / Asymmetric
(Nano)
Inserting Speed pcs/min 1000 1000 1500 1000 600
Minimum Dripper Distance cm 10 10 10 20 20
Perforator Type - Servo Servo Servo Servo Servo
Perforating Speed pcs/min 1000 1500 1500 500 500
Extruder Capacity Kg/h Servo Servo 
200 - 250
Servo Servo 
200 - 250
Servo Servo 
200 - 250
140 - 150 140 - 150
Winder Type - Automatic Automatic Automatic Automatic Automatic










View Complete Details

Round Drip Irrigation Pipe

Round Drip Irrigation Pipe Production Line


It is possible to produce Round Drip Irrigation Pipes in a fast, safe and controlled manner with Round Drip Irrigation Pipe Machine that is the work of advanced technology and experience.


Damla Plast, as usual, did not compromise the quality for this machine, established the principles such as high efficiency, easy to use, fast service, spare parts supply from stock and has offered these to our esteemed customer.



Throughout the project, for our esteemed customers working with us, solutions are created for preliminary examination, installation and commissioning, training, staff support, mold and other necessary equipments.

 
DRD - 100R DRD - 400R DRD - 500R DRD - 600R
Pipe Diameters mm 16 - 20 - 25 16 - 20 - 25 16 - 20 - 25 16 - 20 - 25
Pipe Wall Thicknesses mm 0,6 - 1,1 0,6 - 1,1 0,6 - 1,1 0,6 - 1,1
Maximum Working Speed m/min 37 70 80 125
Optimum Production Speed m/min 20 - 35 40 - 60 60 - 80 80 - 100
Inserter Type - Pneumatic Servo Servo Servo
Dripper Type - Round Round Round Round
Dripper Diameters mm 16 - 20 16 - 20 16 - 20 16 - 20
Inserting Speed pcs/min 100 225 600 800
Minimum Dripper Distance cm 15 15 15 10
Perforator Type - Mechanical Servo Servo Servo
Perforating Speed pcs/min 100 400 400 600
Extruder Capacity Kg/h 65 - 82 140 - 160 200 - 230 Servo - 230 - 280
Winder Type - Semi-Automatic Semi-Automatic Semi-Auto or Full-Auto 
(Optional)
Semi-Auto or Full-Auto 
(Optional)
Multilayers - Double Layers 
(A-B) (Optional)
Double Layers 
(A-B) (Optional)
Triple Layers 
(A-B-A) (Optional)
Triple Layers 
(A-B-A) (Optional)
 







View Complete Details

Hot Runner Systems

GNTHER Heisskanaltechnik GmbHis a well-known name and has their own niche in the market place with ground- breaking technical innovations with the highest standards of quality & precision.


GNTHER is often called as"Gunther is my supplier of choice"by the customers.


Gunther GmbH is the only company who satisfies demanding customized solutions. As a specialist, Gunther holds a number of patents to meet all the requirements.


The major benefits of Gunther Hot Runner Technology are:



  • Optimal temperature control

  • Uniform pressure distribution

  • Good gate quality

  • Side gating without "cold slug"

  • Cost effective manufacturing

  • High production reliability

View Complete Details

Filling Device High Pressure Compressor Accessories

Filling device
4 point panel - 2 x 200 bar, 2 x 300 bar with hose and DIN anti-whip connections


The wide range of L&W filling panels has established itself as an industry benchmark for optimum design with an extensive list of features. The modular design guarantees that filling stations can be extended to adapt to your future requirements. The panels are available with either 200, 232 or 300 bar filling pressure (3000/4500 psi) or as dual pressure filling panels for simultaneous filling without the need to select the pressure. The self venting lever operated filling valves are available with either filling hoses and connections or direct filling connections for BA cylinders. We have a wide range of filling connections available.

A unique feature of the L&W panels is the facility to swing open the housing for maintenance work, without any disconnections, a leak check can be carried out while the panel is open.

View Complete Details

Storage Tanks Compressor Accessories

Storage tanks are frequently used to provide extra filling capacity during peak periods. The storage cylinders can either be opened all at once" in a single stage, or cascaded" into the cylinders to be filled, usually in 3 stages. Ideally the storage pressure should be higher than the filling pressure, 300 bar storage systems are the most common. The storage systems can be used with most compressors and are best suited for automatic operation (e.g. ECC or auto start option). L&W has a full range of storage modules each of which can be combined with other modules for individual configuration.

View Complete Details

Filling Connections Compressors


Filling Connections


Filling connections for SCBA and diving cylinders in accordance with national/international standards.



View Complete Details

Safety Valves Compressors


Safety Valves


Safety valves are available for various pressures, either securing the final pressure on HP compressors and installations or preventing damage to inter stage or low/medium pressure components.



View Complete Details

Pressure Switches And Sensors


Pressure switches and sensors


A wide range of analogue pressure switches and electronic pressure sensors is available suitable for pressures between 0 and 600 bar.



View Complete Details

Inlet Filters


Inlet filters


Various inlet filters are available for the different sizes of compressors, the inlet filter cartridge is a low cost component that plays a significant role in protecting the compressors, a clean cartridge also ensures the efficient operation of the compressor.



View Complete Details

Trimix Gas Blending Panels

Using the partial pressure method, Nitrox and/or Trimix can be mixed and filled safely, easily and accurately using our Pro or Classic filling panels. The panels are tested and certified for 100% oxygen and/or helium mixing for all your breathing gas requirements. Practical valve and gauge layout makes operation easy to learn and use.


For pure oxygen compatible air (OCA), we recommend using the Puracon air controller and/or an extra filter mounted on the panel.


Wall mounted panels for safe and easy partial pressure gas blending. All gas inlets are fitted with isolation valves, non return valves and flow restrictors. The oxygen/helium gas pressure can be read on individual pressure gauges without the need to open the valves which makes efficient gas cascading quick and simple. The design of the panels has been approved by the stringent German TV authorities as suitable for use in Nitrox, Trimix and Heliox applications.


The Panels have a removable rear cover which makes wall mounting very simple and are powder coated in RAL 6026. All the pipework and the connections are stainless steel providing years of trouble free service and safe gas flow. The valves are industrial quality.

View Complete Details

Air & Gas Purification

Filter capacity and filter life, an important theme with financial implications for professional filling stations where cost control is vital. The life of a filter is strongly influenced by the running temperature of the compressor and ambient temperature.


Example: LW 450 E at +20C outlet temperature has a filter life of approx.33 hrs, at +35C this time is reduced to just 10 hours!. If the air is cooled down to +3C after the final compression stage before it enters the final separator, the life of the filter cartridge can be extended up to 6 times, in extreme tropical conditions 10 times!


The L&W refrigeration dryers, named Air Coolers, can pay for themselves within 1 season in saved filter cartridge costs. To monitor the exact state of the filter and register when the cartridge needs changing, we recommend the L&W Puracon moisture controller.


For some industrial applications, the air cooler can provide suitable drying without the need for filters. The coolers are available as independent units with water separators, automatic condensation drain with timer and silencer, or as the economical. LW Air Cooler BASIC for connection to a compressor with final stage oil/water separator and drain.

View Complete Details

Lab Extrusion Machines

HARDEN INDUSTRIES LTDis an industrial group specializes in the design and manufacturing of plastic processing equipments.


POTOP is one of their brands which focus on design and manufacturing laboratory extrusion machines. They are capable of providing various customized solution for rubber-plastic processing and property test. With more than 10 years experience, they have successively developed a lot of patent product such as "fish-eye tester, master batch dispersion tester, lab precision cast film extrusion line, lab precision blow film extrusion line, polymer MDO/BO film stretching machine, triple screw compounding extruder, and 1.5 screw compounding extruder, etc.


The products are advanced designed, high precision and high stable with reliable and instant after-sales service. The customers range from international companies such as 3M, LABTECH, ZTE, European Plastic, Green Field, Heat Trap, Dongfang Steam Turbine, Yanshan Petrochemical, China Weapon Industry Group, etc. to lots of universities such as Sun Yat-sen University, South China University of Technology, Guangdong University of Technology, Shanxi University of Science and Technology, Xian Polytechnic University, East China University of Science and Technology, Changzhou University, etc.


Torque Rheometer
Product specifications



  • Measuring condition is close to actual production

  • High precision measurement can recognize subtle changes in structure and ingredients

  • Integrated frame saves much space

  • Easy to operate, disassemble and clean

  • Mechanical-electro double overload protection device

View Complete Details

Extrusion Capillary Rheometer

Product specifications



  • High precision temperature and pressure transducers

  • Mechanical and electro double overload protection device

  • High precision electronic balance

  • Swift screen changer saves much time

  • Space saving integrated frame


View Complete Details

Lab Banburying Module

Product specifications



  • Measuring condition is close to actual production

  • High precision measurement can recognize subtle changes in structure and ingredients

  • Modula design makes the unit easy to operate, load and clean

  • Mechanical and electro double overload protection device

View Complete Details

Lab Single / Twin / Triple Screw Extruder

Product specifications



  • The structure of the gear transmission box is optimized by CAE software

  • By rearranging block barrel and screw combinations according to the processing characteristic of specific material, it is available to process various materials

  • Swift screen changer makes cleaning much easier

  • Import core parts are adopted in the vacuum exhaust and cooling device and guarantees the stable

View Complete Details

Lab Precise Single Screw Extruder

Product specifications



  • Screws of high machining accuracy are made by the domestic famous professional screw manufacture Huaye

  • Nord variable frequency motor ensures accurate rotate speed of the screw

  • High strength aluminum alloy transmission gear box and cone small roll thrust bearing brings a stable operation

  • Independent temperature control funs

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • Removable stainless steel made hopper

View Complete Details

Lab Precise Cast Film Unit

Product specifications



  • Nord variable frequency driving motor ensures accurate rotate speed of the screw

  • Chrome coated and mirror polished roll surface produce a much fine sheet

  • The anticathode oxidation treated aluminum alloy flatten roll

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Lab Precise Three Roller Calendar

Product specifications



  • Three independent diving rolls enhance the adjustment flexibility

  • Nord variable frequency driving motor ensures accurate rotate speed of the screw

  • Chrome coated and mirror polished roll surface can produce a much fine sheet

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop


View Complete Details

Lab Precise Film Stretching Machine

Product specifications



  • Preheat roll, drawing roll, annealing roll, chill roll are all controlled by independent servo motor

  • The space between drawing roll is adjustable, weakening the necking effect

  • The die machine and conduction oil are chosen for temperature control

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Lab Precise Multi-function Film Processing Machine

Product specifications



  • Integrating casting, drawing, traction, unwinder into one

  • Equipped with casting roll lifting mechanism and adjustable die lips

  • The die machine and conduction oil are chosen for temperature control

  • All rolls are driven independently by International brand servo motor

  • The space between stretch rolls is adjustable

View Complete Details

Lab 1.5 Screw Compounder

Product specifications



  • The auxiliary screw exists along the feeding port only and the tablets on auxiliary screw pressure materials into the main screw channel

  • Nord variable frequency driving motor and reduction box ensure accurate rotate speed of the screw

  • High strength aluminum alloy transmission gear box and cone small roll thrust bearing brings a stable operation

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Lab Twin / Triple Screw Compounder

Product specifications



  • Parallel two/three axis type high speed and high sexual transmission box is adopted and the integrated main transmission and torque distribution makes a compact structure

  • Nord variable frequency motor and reduction box ensure accurate rotate speed of the screw

  • The euro aluminum alloy frame obtains light weight, high strength, excellent corrosion resistance and long service life

  • 304 stainless steel made desktop

View Complete Details

Compounding Extrusion Lines

With more than 10 years experience in plastic machinery industry, Harden Technologies Ltd. is specialized in developing, manufacturing and marketing a range of plastic extruding for compounding, recycling and pelletizing, and relevant auxiliary equipments. SAN-U is one of brands under the Harden umbrella.


Working together with some world best suppliers, SIEMENS, MITSUBISHI, B&R, SCHNEIDER, RKC, ABB, etc., they provide the customers with high quality extrusion equipment with affordable price.


Equipped with several advanced processing and inspecting machinery imported from Japan and UK, they can supply reliable spare parts and components which guarantee their service and support.


HARDEN production program includes:
Plastic Extruder



  • High Speed Single Screw Extruder

  • Co-Rotating Twin Screw Extruder

  • Counter-Rotating Twin Screw Extruder

  • Two Stages Extruder

View Complete Details

Extrusion Lines For Foils

Extrusion lines for foils, sheets and multicellular panels
AMUT applies more than 50 years experience in plastic sheet extrusion to offer its Customers complete and technologically advanced lines to produce foils and sheets from a wide range of thermoplastic materials, to be used for a large number of different applications.
The AMUT production range includes extrusion lines with nominal width from 400 to 3300 mm and thickness from 150 microns for foils up to some centimeters for sheets or multicellular panels.
The number of co-extruders is defined depending on the specific needs of the customer and the characteristics of the finished product. Using the AMUT extrusion lines, sheet configuration up to 9 layers and output capacity over 4000 kgs per hour can be obtained.


Food Packaging
Sheet for thermoformed food packaging, with and without barrier layer. Layers can be co-extruded or laminated for airtight seal. They can be treated for printing or metalizing. Specialty execution for form fill-seal automatic lines.
Materials: PET, PS, PE, PP, EVA, EVOH.


Multipurpose and Pharmaceutical Blister Packaging
Sheet for thermoformed packaging for consumer goods display, for medicine tablets or capsules blister, treated for the hermetic seal welding or bonding.
Materials: PET, PVC.


Paper & Cardboard Industry
Sheet and foils for stationery items (binders, folders, catalogues, files) or gift, cosmetic and perfume boxes packaging. Single or multilayer foils, with surface embossing and treatment for printing, cut and stacked in reams for further process.
Materials: PET, PP, PVC.


Waterproofing
Waterproofing membranes for building industry and civil infrastructure (protective covering, flat roofing, tunnels and subways, train track and roadway beds, bridges). Single or multilayer membranes, with inner reinforcement and fleece bonding for support, surface embossing and aesthetic finishing. Specialty execution for dimple or deep-drawing membranes to insulate the concrete foundations from soil.
Materials: F/PVC, TPO, HDPE.


Furniture Industry
Single or co-extruded sheets for panels covering of domestic furniture, mostly kitchens. Also for edge bands production, with wood grain surface embossing, primer coating, printing with UV drying system.
Materials: ABS, PMMA, PVC, PP.


Refrigerator Industry and Bathroom Furnishing
Single or co-extruded sheets to be thermoformed for refrigerator doors or bathroom furnishing such as shower pans, basins, bath tubs, corner shower fittings. Surface treatment for foam application, bright and glossy finishing. Automatic cutting and stacking.
Materials: PS (HiPS and GPPS), ABS, PMMA.


Medical Bags
Non-toxic foils for medical bags to be used for transfusion, dialysis or phleboclysis. Glazing or embossing surface finishing, to prevent foils from adhering during the sterilization cycle in autoclave.
Materials: PVC, PP.


Multicellular Panels
Polypropylene Cartonplast for stationery items.
Single or multi-chamber Polycarbonate panels for the building industry.
Materials: PP, PC.


Photovoltaics
Foils for the encapsulation of silicone modules used in solar panels production. Embossing finishing and in-line cross-linking treatment, partial or total.
Materials: EVA.


Automotive
Foils and sheets for large application in this field.
Sound deadening sheet for engine compartment, sheets bi-laminated with nonwoven layers for interiors (passenger and trunk compartments), co-extruded sheets to be thermoformed for car door covering.
Materials: PP, TPO, PVC.


Speciality Execution
Many different special applications, among which:



  • Corrugated sheet, co-extruded from LDPE foam, for the industrial packaging of bulky products (coils, plates, stainless steel pipes, etc.)

  • Transparent sheet for hobby works and bricolage, extruded from PS crystal (GPPS)

  • Flexible sheet for gaskets or sealing units, extruded from fluoropolymers (PFA, PVDF, Teflon)

  • Foil for artificial leather, table cloths, industrial curtains and room partitioning, extruded from Flexible PVC

View Complete Details

CPP & Stretch Film Lines

  • Gravimetric groups, continuous or batch type, up to 6 hoppers for each extruder Specific design for PP resins: 55 – 65 – 75 – 90 – 105 – 120 – 150 – 160 – 180 DEKC
  • 30 - 32 - 35 Variable or fix geometry feed block Automatic extrusion die with internal deckling system
  • Dual-type Automatic control system with following choice of sensors: -Infrared -X-ray
  • Automatic turret winder Automatic turret winder with independent arm In-line reprocessing systems
  • Operator friendly line supervisor model logicontrol 2.0 In-line multislit system Annealing section

AMUT DOLCI BIELLONI offers a wide range of cast line for the production of Polipropilene film (CPP), equipped with:



  • New barrier low shear design to improve melt quality and reduce energy consumption, specifically designed for Polipropilene resins

  • Optimal L/D ratio for perfect melt quality production

  • Heaters bands for quicker heating and lower energy consumption

  • Vector motors, lower power consumption

  • Reduced length of connection necks between extruders and feed block

  • Cast extrusion die with "positive inclination on the chill-roll

  • Trims reprocessing unit with compactor and forced feeder


The result of the abovementioned features is low power consumption per kg of film produced.

NET WIDTH NUMBER OF LAYERS OUTPUT
1200 mm 3 Up to 350 kg/h
1600 mm – 1800 mm – 2100 mm 3 Up to 500 kg/h
2400 mm 3/5 Up to 1000 kg/h
2800 mm 5 Up to 1200 kg/h
3000 mm 5 Up to 1000 kg/h
View Complete Details

Single Stage Extrusion Coating Lines

Single stage extrusion coating lines for the production of coated paper, coated non-woven/woven webs for food packaging, industrial application and disposable items.


Single stage extrusion coating / laminating lines for the production of paper / PE / alufoil webs or BO films / PE / Metallized BO films for pharmaceutical, cosmetic, industrial or general applications.


Double stage extrusion coating / laminating lines for the production of complex-multicoated webs for pharmaceutical, cosmetic, food pack, industrial, sanitary and insulation industry.


Tripe stage extrusion coating / laminating lines for the production of multilaminated paper board for UHT aseptic (liquid) packaging.


Production Range:
Line width: from 800 to 2500 mm
Line speed: up to 200 or up to 500 m/min
Rolls diameter: from 800 to 1600 mm
Extrusion dies: Non-automatic or automatic with external or internal deckling system
Extruders size: from 55 to 180 mm
Range of up-stream / downstream accessories: Corona or flame treater, ozonizing bars, reversing bars, primer stations, single or differential gauge controls, in-line flexo printing stations, in line creasing stations, video camera and web inspection instruments.
Type of unwinders: semi-automatic or automatic turret type (flying spice), butt-splicers shafted or shaftless


Type of rewinders: contact type or automatic turret type with in-line multi-slit station, shaftless or shafted

View Complete Details

Helical Wound HDPE Pipe

PE Pressure & Non Pressure Structured Wall Pipes up to 4000mm
Krah AG, the German machine manufacturer, has developed a complete production line to produce pressure pipes in diameters ranging from DN/ID 300mm to DN/ID 4000mm made of a compound of polythelene reinforced with fibres to unite the well-known properties of thermoplastics with the significant characteristics of fibers.


The machine is designed similar to the well established KR Series production machines, applying the winding process to produce pressure pipes up to 10 bar working pressure. Moreover it can be upgraded to the characteristics of the conventional KR Machine, so that now one single machine, the so called KDR machine, is able to produce structured wall Non-Pressure Pipe Systems as well as solid wall PE-GFR Pressure Pipe Systems.


However, the equipment is not only designed to manufacture the pipes themselves, but it is able to produce an integrated electro fusion joint and the complete range of fittings for pressure as well as non-pressure applications.


High production output, enormous flexibility, short setup and change over times, simple operation, a perfect joint and more application facilities for the products are the main characteristics of all Krah machines.


Moreover, the customer decides which pipe diameters are needed to satisfy the market requirements and he purchases only the necessary production tools for these pipe diameters. This allows the customer the optimum choice of equipment with the possibility to upgrade the equipment later by purchasing production tools in other diameters. Such an upgrade does not require any modifications to the machine. Furthermore every pressure class can be produced without the necessity to invest in further dies or special tools.


Various formulations of high density polyethylene (PE 63, PE 80, PE 100) can be used to produce the requested end product, thus providing all positive characteristics compared to other stiff pipe materials like concrete, steel, etc.


The DR Series is designed to produce, in the most economical and ecofriendly way pipes, fittings and manholes in diameters ranging from DN/ID 300mm to DN/ID 4000mm and in lengths from 1m up to 6m and on special request even longer, 6m pipe length has become a standard length because of their easy to transport and handling.

View Complete Details

Re-conditioned Extrusion Lines

Next GmbH is a sister concern of Graewe GmbH, Germany. Pipe ExtrudersFor over 25 years they have provided some of the best Preowned reconditioned machines for extrusion from well renowned brands like Battenfield, Weber, Cincinnati, Kraussmaffei etc. With over 4000 sold used extrusion equipment, they are among the leading suppliers for extrusion machines.


Machines from next stand for quality, reliability and expertise



  • Quick availability Moderately Priced

  • Completely over hauled


Product range



  • Complete Line for Pipe and Profile Extrusion

  • Single and Twin Screw Extruders

View Complete Details

PET Bottles Recycling Lines

The quality of the PET flakes manufactured by the AMUT recycling technology is almost comparable to the virgin PET:



  • The glue residuals are almost absent

  • PVC and floating material are reduced to the minimum

  • The organic residuals are traced between 0 and 70 ppm

  • Residual of soda is insignificant, as confirmed by the measurement of pH rise



The above performances enable AMUT to obtain a material free of black specks, with Colour b and delta Colour b that make it suitable not only for fibers, but also for more complex applications, such as:



  • Bottle-to-Bottle

  • Bottle-to-Packaging

  • Strapping where the final product requires a subsequent degradation treatment



Standard plant sizes (output): 500, 1250, 2000, 2500, 3000, 4000 kg/h
Flexibility
The plants are supplied on a turnkey basis or according to the customerBottle-To-Bottle requirements. Thanks to the modular construction, the plant can be installed both into existing buildings and new projects. Therefore it is also possible to integrate the modular units for bottles pre-washing and flakes washing into the existing plants.

View Complete Details

Industrial Tire Recycling Shredders

  • Country of Origin India
  • Type Tyre Recycling Machine

A complete ZERMA tire recycling system consists of 5 main components



  • The ZXS Pre-shredder shreds the complete tires down to a size of around 150 mm

  • The ZTTS Intermediate shredder cuts the tires down to a size of

View Complete Details

Vertical Injection Moulding Machine

V-S Series


Clamping Force:35-250Ton




  1. Vertical clamping, vertical injection, easy to insert

  2. S-single slide table (1 upper mold, 1 bottom mold)

  3. In-Out table design, more convenient.

View Complete Details

Blown Film Lines

  • Gravimetric groups, continuous or batch type, up to 6 hoppers for extruder 45 - 55 - 65 - 75 - 90 - 105 - 120 - 150 - 160 - 180 DEKC; L/D 30 - L/D 32
  • Multisplit type  Pancake multilayers Dual lip type ring, automatic rings, stationary or rising-type IBC (internal bubble cooling)
  • With ultrasonic sensors for IBC, with no scratch contact guiding sleeves 3600C oscillating on air cushion rolls Net width up to 3500 mm Gusseting systems and water cooling systems
  • Single station, back-to-back or front-to-front configuration Contact, axial, gap or reverse winding Reels diameter: 800 - 1000 - 1200 mm (up to 2000 for heavy duty sacks) Operator friendly line supervisor, model "Logicontrol 2.0"

With AMUT DOLCI BIELLONI extrusion lines synergically conceived with the clients, several products of daily use are obtained: carrier bags, refusal sacks, thermoshrinkable film, stretch hoods, stretch films, bags for vacuum/ controlled atmosphere food packaging, film for diapers, coextruded film for the most diversified packaging applications and for agrifilm.


Co-extrusion lines from 3 to 9 layers structures with different level of automation, including:



  • Gravimetrics for resins and recipes

  • Automatic cooling rings for accurate film thickness control

  • Automatic manipulators for shaft, rolls and cores handling

APPLICATIONS WIDTH (Layflat) NUMBER OF LAYERS THICKNESS RANGE
Film for heavy duty bags 800 -1000 mm 1/3 40 - 180 µ
Quality technical films for food packaging and general applications 1200 - 1400 - 1600 - 1800 - 2000 -2200 mm 3/5 20 - 250 µ
Barrier films (for gas barrier and non-gas barrier film for food vacuum packaging and technical applications) 1300 - 1600 mm 5/7/9 25-200 µ
Blown stretch wrap film and Agristretch film 1800 - 2250 mm 3/5 15 - 35 µ
View Complete Details

Laminating Machines


Julia Super Star


Outstanding features:



  • Being the laminating station located on the opposite side of the glueing section it results very close to the unwinder of the material to be laminated. This particular configuration facilitates and optimizes the lamination of delicate webs such as thin alu-foil at very high speed;

  • The maximum machine speed is up to 450 m/min (1300 fpm);

  • All electrical and electronic components are confined inside of a cabinet which is part of the machine body for easier wiring and maintenance;

  • Very precise tension controls due to selected electronic components;

  • Easy and quick change of the transfer roll because of pneumatic sleeve and cantilevered mandrel;

  • Optional shaftless unwinders and rewinder lifting and/or releasing the rolls directly on the floor;

  • Thick and ribbed cast frame (80 mm) for the highest machine stability at top speed;

  • Very precise two components glue mixing and metering of brand new design.


Technical data:



  • Coating width: mm 1200 (47") - 1400 (55") - 1600 (63")

  • Production speed: up to 450 m/min

  • Frame thickness: 80 mm (3, 1")

  • Transfer cylinder: on cantilevered mandrel

  • Max. Diameter of unwinding reels: up to 1.300 mm (51")

  • Max. Diameter of rewinding reel: up to 1300 mm (51")



View Complete Details

Solar Line Extrusion

  • Width 1.050 - 2.100 mm
  • Materials EVA, TPU
  • Thickness range 0, 3 - 0, 8 mm

EVA, Ethylene-Vinyl-Acetate, is the type of material produced with AMUTs extrusion foil line and it is especially reserved for the production of solar-photovoltaic panels.
EVA foil protects the photovoltaic cell, encapsulating and wrapping the silicon cells, and enables a perfect sealing and a high adherence with the outer glass sheet and with the back-sheet (lower layer).


The EVA foil delivered with AMUT lines assures:



  • The maximum light transmission;

  • The absence of deformations or shrinkages;

  • A great capacity to achieve a good cross-linking level (necessary to end the panel lamination very quickly);

  • The satisfaction of TV or CEI EN 50086 certificates requirements.


All units of the line are purposely designed for this application and to not compromise the foil dimensional stability.


There is not cross-linking during the extrusion process.


The innovative winding system can wind-up, directly in-line, the foil in reels or permit to laminate in-line a separating film sheet (mask film) or a silicone paper foil to protect EVA foil completely.

View Complete Details

Medical Tubing Extrusion

Materials:PVC, PP


The output satisfies the medical industry requirements: dimensional precision, reduced tolerance in production, clear or mat surface and absolutely no contamination allowed.


According to diameters, thickness, geometry and production that customer requires, the extrusion lines for medical tubing count on different models of extruders and heads.


A perfect calibration is ensured inside the vacuum tank, where a modulating control interacts with diameter measuring system, adjusting the vacuum if necessary.


Water immersion cooling tunnels are sized in length depending on the throughput required and are closed type to prevent any possible contamination. Process water is filtered using a special filter to ensure its purity.


Finished product is rolled up on cantilever reels, to avoid contact with floor while the reel is automatically changed by the system. Winding system is controlled by a non-contact sonar device, to prevent tension on tubing while the reel is forming.

View Complete Details

Washing Lines

Output:from 500 up to 6000 kg/hContinuous process, not based on batches, with a substantial saving of water.



The flakes produced are suitable for the following applications:


Bottle to Bottle


Bottle to Packaging


Bottle to Fibres


Bottle to Sheet


Bottle to Strapping

View Complete Details

Second Hand Extrusion Machines

Next Machines offer over 400 extrusion machines and downstream machines made by GRAEWE and other manufacturers.


Tested quality from the market leader:


Ensure Tender, advice and quality check in all respects when purchasing extrusion machines. Assured that the wear parts of every machine have been renewed and the most important aggregates have been overhauled or replaced, this means tested quality from the market leader.



Large choice and fast availability:


The extrusion machines form an important part of process cycle. An unexpected failure can have grave consequences for production. To prevent this, one of the mainstays of our range of services is fast availability. From a range of more than 400 extruders and extruder downstream equipment, select the type that is exactly tailored to your purpose at a reasonable second-hand price.This will make decision-finding process easier for projected purchases. For us it is important not to deliver the extrusion machine before the machine has been submitted to an all-inclusive professional inspection, to a thorough servicing, and not before any repairs that were required have been completed.



Our Service Comprises, Among Other Points:


Overhaul, respectively replacement of screw and cylinder


Replacement of melt pressure and temperature sensors


Replacement of the sealing packages and gas removal pumps


Replacement of heaters


Overhaul of the motor


Checking of the gears


Gear oil change


Oil filter change


Replacement of the V-belts



Our Special Next Service Comprises:


Finishing customized to clients colours


Trial run


Recording of the output capacity.



Universal experience for individual solutions:


Over the past 20 years Next Machines sold well over 4000 second-hand extrusion machines and have become an established market leader in this market segment.


Every single installed system differs a little from the next - and all the experience and know-how gathered over the past two decades will flow into an individual solution for your special requirements. And, because the special details often become so very important, it shall be our pleasure to invest some more time in consultation and advice.


To get notification and updates on New Second Hand Machines simply fill in the form given below. You will receive appropriate details in your inbox shortly.

View Complete Details

Compounding Extruder

Compounding extruder is a counter-rotating parallel twin screw extruder, which is different from those popular conical twin screw extruder used in PVC compounding and extruding industry.The technology of this PVC compounding extruder is advanced and solves the quality problem due to the narrow anti-temperature range of the stabilizer.



This high performance PVC compounding extruder could achieve good mixing and blending effect. With the same diameter of the screw, the counter-rotating parallel twin screw PVC compounding extruder has higher output than that of traditional two screws PVC compounding extruder. Configured with processed gearbox, this PVC compounding extruder is durable and easy to maintain.

View Complete Details

3D Filament Extrusion Line

Harden is well established in design and building extrusion lines for polymer processing since 2006. The company has always been leading the industry in developing precision small extrusion lines and laboratory extrusion equipment. As FDM technologies is being becoming popular, Harden set up a subsidiary specialized in supplying 3D printing filament production lines.



Product Application-3D Printer Filament Extrusion Line


3D printing filament production lines are available in three functionality options and a desk-top version is also available for small lab scale production and testing.


HARDEN is dedicated to provide the best small extrusion lines and service for you from China. Our extruders are famous for its melt quality, pressure stability, zero down time, easy operation, and short start-up time. With these features, customers get an advantage of high production rate, high product precision, and very low rate in material waste.



Main Features of 3D Printer Filament Extrusion Line:



  • Using SIEMENS touch operation, real-time display of the running state, alarm information and system parameters

  • PID temperature control, the accuracy up to 1

  • Pressure closed loop control is used to improve the stability of the extrusion pressure and the uniformity of the 3D printer filament

  • The traction unit using imported servo motor drive and is composed of the closed-loop control system with diameter measuring instrument, which can quickly respond to the change of the speed of the extruder, so as to achieve the requirement of the accuracy

  • The use of special winding tension transducer, to ensure the tension balance, rolling smooth and tidy, to avoid the phenomenon of knot

  • Remote monitoring can be achieved for you to build an intelligent automatic to provide convenient conditions

Description  Unit  TSI-35  TSI45
 Screw Diameter   mm  Φ 35  Φ 45
 Length Diameter Ratio  L/D  28 28 
 Speed rpm   0-107  0-107 
 Pulling Speed  m/min  0-150  0-150
 Max. Output  Kg/h  20  30
 Diameter   mm  Φ 1.75/Φ 3.00  Φ 1.75/Φ 3.00
 Accuracy  mm  ±0.01  ±0.01
 Power of Motor  kW  7.5  15
 Total Power  kW  38  45
 Storage Capacity  m 100   100
 Dimensions  mm  9579*1513*2393  9579*1513*2393
View Complete Details

Pipe Saws Machine

315mm (weight 1, 000 kg); 380 volt 3 phase 50 Hz (2.25 kW)
630mm (weight 1, 900 kg); 380 volt 3 phase 50 Hz (3.7 kW)
800mm (weight 2, 300 kg); 380 volt 3 phase 50 Hz (3.7 kW)
1200mm (weight 6, 000 kg); 380 volt 3 phase 50 Hz (6.25 kW)
1600mm (weight 7, 000 kg); 380 volt 3 phase 50 Hz (9 kW)
67 degree maximum cutting angle allows production of segments for bends, tees and Y-branch tees
Angular cutting error equal to or less than 1 degree
Speed of saw blade 250 m/min

View Complete Details

Saddle Fusion Machines

Features:



  • Suitable for fabricating PE reducing tee in a workshop. Integrated function of welding and taping enables to complete the whole fabricating process

  • Removable PTFE coated heating plate

  • Separate two-channel timer records times in soaking and cooling phases

  • Digital high-accurate pressure meter indicates clearer readings

  • Linear guide ways are equipped with heating plate and dragging plate



Specifications:



  • Working Ranges: Reducing tee

  • Main Pipe Max. Diameter: 630mm/800mm/1000mm/1200mm

  • Branch Pipe Max. Diameter: 315mm/400mm/500mm/560mm

  • Heating Plant Max. Temp: 270

  • System Pressure Ranges: 0-16Mpa

  • Working Voltage: 380V, 50HZ

  • Heating Plate power: 812KW

  • Hydraulic Unit Power: 1.5KW

  • Drill Motor Power: 1.53KW

  • Total Power: 1116.5KW

  • Weight: 1900KG


View Complete Details

Downstream Equipments For Extrusion

Graewe products stand for high productivity, low operational, maintenance and service costs and shorter delivery time.


Vacuum, calibration and cooling tanks



  • Belt and caterpillar haul-off

  • Adjustable pressure for delicate hoses and profiles

  • High Precision driven via AC servo drive

  • Cutting units

  • Cutting Saw and Planetary Saw

  • Cutting and Chamfering machines, servo cutters


Automatic Winders



  • Driven by maintenance free AC servomotor

  • Precise traversing

  • Automatic feeding

  • Automatic change-over

View Complete Details

Saba 6 SLV (Gear Presses)

Features:



  • C.I. Dum 1410 Mm - Chrome Plated

  • Horizontal-Sequential Throw-Off

  • Automatic In-Register Pre-Setting

  • Frame And Decks Thickness 100 Mm

  • Pneumatic Locking

  • In And Out Motorised Decks

  • Automatic Turret Rewinder

  • Extended Drying

  • Three Automatic Tension Controls


Technical Data:



  • Number of decks 6

  • Type of inks : solvent based

  • Useful printing width (max) : mm 800 (31, 5") - 1000 (39") - 1200 (47 3/4 ") - 1400 (55")

  • Web widht (max) : mm 920 (36") - 1120 (44") - 1320 (52") - 1520 (60")

  • Minimum print repeat : 340 mm (13")

  • Maximum print repeat : 1050 mm (41")

  • Maximum mechanical speed : 280 m/min

  • Central Drum Diameter : 1410 mm (55, 5")

  • Print Structure thickness : 100 mm

  • Anilox Cylinder diameter : 127 mm (5") - 150 mm (6")

  • Rack in out of each printing station : motorized

  • Longitudinal register : motorized

  • Horizontal register : motorized

  • Sequential Trough off : Yes

View Complete Details

Telia FSC (Gearless Presses)

Telia 8 FSC is the latest development of the FSC (Fast Sleeve Change) system applied to our gearless technology.


Main features:



  • Totally interchangeable printing decks with identical mechanical components for each deck to simplify maintenance;

  • Dual high precision linear guides;

  • Step-by-step motors to repeat every position previously recorded;

  • New self-cleaning pneumatic doctor blade chamber;

  • "FSC" system for sleeve change and rapid deck opening with horizontal movement;

  • Integrated automatic deck wash-up system;

  • Air Recirculation Bridge to increase drying efficiency;

  • Motorised bridge threading and passage;

  • Pressure and register remote control;

  • Electrical equipment in climate controlled container.


Technical Data:



  • Number of decks : 6/8/10 with or without in line roto or flexo units

  • Useful printing width : up to 2.200 mm (87")

  • Anilox and plate cylinder : sleeve type

  • Minimum print repeat : 300 mm

  • Maximum print repeat : 900 mm

  • Mechanical speed : 500 m/min

View Complete Details

Telia Maxi (Gearless Presses)

Telia Maxi is the latest development of the FSC (Fast Sleeve Change) system applied to our gearless technology.


Main features:



  • Totally interchangeable printing decks with identical mechanical components for each deck to simplify maintenance;

  • Dual high precision linear guides;

  • Step-by-step motors to repeat every position previously recorded;

  • New self-cleaning pneumatic doctor blade chamber;

  • "FSC" system for sleeve change and rapid deck opening with horizontal movement;

  • Integrated automatic deck wash-up system;

  • Air Recirculation Bridge to increase drying efficiency;

  • Motorised bridge threading and passage;

  • Automatic Pressure and register control system;

  • Electrical equipment in climate controlled container.


Technical Data:



  • Number of decks : 6/8/10

  • Useful printing width : up to 2.800 mm (87")

  • Anilox and plate mandrels : carbon fibered

  • Minimum print repeat : 350 mm

  • Maximum print repeat : 1.100 mm (43") - 1.250 mm (49") - 1.400 mm (55")

  • Mechanical speed : up to 450 m/min

View Complete Details

High Speed Mixers

With more than 10 years experience in plastic machinery industry, Harden Technologies Ltd. is specialized in developing, manufacturing and marketing a range of plastic extruding for compounding, recycling and pelletizing, and relevant auxiliary equipments. SAN-U is one of brands under the Harden umbrella. Working together with some world best suppliers, SIEMENS, MITSUBISHI, B&R, SCHNEIDER, RKC, ABB, etc., they provide the customers with high quality extrusion equipment with affordable price.


Equipped with several advanced processing and inspecting machinery imported from Japan and UK, they can supply reliable spare parts and components which guarantee their service and support.


HARDEN production program includes:
Plastic Auxiliary Machinery



  • Vertical High Speed Heat Mixer

  • Vertical Cooling Mixer

  • Vibrating Sieve

  • Centrifugal Dryer

  • Two Roller Mill

View Complete Details

Vertical Cooling Mixer

Our vertical cooling mixer has good function in storage, drying, cooling and even Vertical Cooling Mixerspreading. Double layer cooling cover is available upon customers requirements.


Main Features of Vertical Cooling Mixer



  • Direct driven decreases the rate of maintenance

  • Boiler with interlayer is good for heat conduction

  • Stainless steel cover is convenient to open and close

  • Polished interior wall of boiler is easy to clean

  • Unique cooling function of the cooling cover can enhance the processing capacity

View Complete Details

Vibrating Sieve

Our vibrating sieve can be used to separate materials into various sizes for further processing.


Main Features of Vibrating Sieve



  • High efficiency

  • Compact and durable design

  • Easy to change screen, operate and to clean

  • Automatically discharge impurities

  • No mechanical operation, easy to maintain

  • Can be used as single or multi-layer

  • Stainless steel for whole unit

View Complete Details

Centrifugal Dryer

This vertical centrifugal dryer is made of stainless steel. It is suitable for washing and dewatering Centrifugal Dryerof plastic films, scraps and granular material.


Main Features of Centrifugal Dryer



  • High degree of dehydration

  • Saving energy

  • High efficiency

  • High degree of automation

  • Easy to clean-up

  • Low noise

  • Safe

View Complete Details

Pulverizer Machine

PM
One of the main fields of use for the ZERMA PM Pulverizers is the pulverization of PVC regrind in pipe and profile recycling. Working in line with a shredder and granulator to have a balanced and efficient system to handle in house production waste. Another application is the grinding of PE for Rotomolding applications, here the PM Pulverizer is used in the production process to create the powder needed in the process.


Advantages of the PM Pulverizers



  • Simple adjustment of cutting gap

  • Choice of discs or segments

  • Low drive power

  • High throughput

  • Innovative efficient design

  • Wide range of accessories

  • Easy temperature control

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ramesh Parasuraman (Allied Solutions (I) Pvt. Ltd.)
  • 313/314, Raikar Chambers, Govandi [East], Mumbai, Maharashtra - 400088, India
  • Share us via