Our Products
Foot operated Impact Press model AMI-10 equipped with handchrome pillar, T slotted base for work holding. The precise control of striking load, the adjustable arm and wide throat permit using the press in various industries having maximum adjustable pressure upto 1000Kgs. working surface of table 150 x 100 mm, throat centre distance 130 mm
Indigenous make treadle operated shearing and corner cutting machine suitable for cutting corners of tin containers, and cutting sheets upto 6" width in 24 swg, sheets complete with four edge cutting blades, spring and corner cutting attachment. |
are manufactured from suitable case hardening steel, carburised, hardened and tempered and ground to close tolerance as per international standards. Collets are made out of suitable spring steel property heat treated and finished to desired accuracy. They are available in MT and ISO series. Collets are availableinmetric 3 to 25 mm rising by 1 mm andinenglish 1/8" to 1" rising by 1/16".
fulfills the deficiency of special type of machines by converting your milling machine. Radial drill or lathe machine. Available in different types of shanks i.e.morse and international standards. Boring capacity with standard boring bars from 15 to 320 mm. |
Automatic wire straightening and cutting machine having an exclusive and elite combination of speed and accuracy backed by intensive research of experts. These machines are used where wire is further processed in rods, coiled wire accurate straightening, close length tolerances and high output are of importance, widely used by electric welding rods manufactures, electric fan guards, refrigerator racks, cloth hangers, automobile parts, electric parts industry, gives you both financial and inner core satisfaction as it is very easy to use requires no special skill.
Indefinite length of wire can be cut out without automatic attachment. The machine operates by drawing the wire from the coil through the fast rotating spinner, passes through a cutting of tool into the scaling bar where it strikes at the adjusted length and this stroke makes the cutting mechanism complete. This straightening function is performed by 5 straightening blocks which are adjustable and contains a simple to use straightening bush lets the user to make replacement to his own work
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Hydraulic puller - Remote controlled comprising of hollow ram cylinder hand operated high pressure, single acting, single piston, Hydraulic pump with pressure gauge adoptor, 2 meter long high pressure rubber hose but without any attachmnets. |
|
||||||||||||||||||||
Indigenous make hand operated conical bending roller suitable to form the cones from bucket body blanks with standard uniform taper as required in buckets, capacity to handle up to 20 swg. thick steel sheets and admits maximum width of sheets up to 18' Die of three conical rolls 3.7/8" at one end 2" at other end; top roll adjustable for various thickness end rear roll adjustable varying dia. of different sizes so buckets, complete mounted on heavy bench stand. |
|
||||||||||||||||||||||||||||||
BENDING ROLLERS (Heavy Duty) Hand operated heavy duty GEARED BENDING ROLLERS (Slipout type) | ||||||||||||||||||||||||||||||
|
UNIVERSAL INDEXING FIXTURES is having swivelling and tilting arrangement suitable for working at desired or compound angle on any machine. Indirect indexing by work and work wheel. Direct indexing by easy disengagement from worm and wormwheel. Work dial hard chrome plated for wear and corrosion resistance. Available in 110 mm dia of true chuck and chucks swivelling 0 to 360 degrees and chucks tilting 0 to 90 degrees. |
|
SPECIFICATIONS | |||||||||||||||||||||
|
Air and drain cock, Safety valve, Non-return valve, Suitable electric motor ( 3 phase / single phase), Pressure gauge, Motor pulley, Motor slide rail, Belt guard, V-belt |
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
STANDARD EQUIPMENTS :
Electric Motors Complete with Panel Board & Pendant Control for all operations. One Steel Telescopic Cover, One Boring Bar, Working Spindle Support Guide for Vibration Control, Co-ordinate reading arrangement with Scales & Verniers for X. Y.Z.-Axis and Handles. Facing head, 2No. Lubricating Pumps, 5 No. limit Switches & Automatic Rapid Travel, fitted with the Machine. Revolving Centre with 6"True Chuck Three Nos. Dial Indicators duly fitted in dust proof housings with attachment & Electric Coolant Pump.
EXTRA EQUIPMENTS :
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
SPECIAL FEATURES :
SPECIFICATIONS | ||||||||
|
POLISHING DRUM
is made from steel fabricated angles & thick sheets. It required 2 HP. electric motor. It revoles at 40 to 45 R.P.M. & having a 200 Kg. capacity.
HAND - OPERATED BENDERS :
Benders are available in five rugged hand operated models. Bending capacity covers a material range from 1/16" wire to 1.1/4" inch round steel bar or its equivalent. Benders from a wide range of stock shapes including round, square, hexagonal, flat, and channel (all bar stock) and tubing. They come equipped with bend locating gauge for part duplication, Angle stop to determine degree of bend and locking pin to securely damp material. Radius forming possibilities from 0 to 12 inches. Torrington rollers installed in main bearing reduce friction, facilitate easy bending, and help bend large stock easily. Ratchet power assist for large stock is standard on Hand Model No. 4 and No. 5.
STANDARD EQUIPMENT :
EXTRA ACCESSORIES :
SPECIFICATIONS | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
STANDARD ACCESSORIES :
OPTIONAL ACCESSORIES:
|
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
This Machine is used for faster operation of Line Boring of the Main Bearings and Cam Shaft Bearings of Automobile & Tractor Engines. The bar supplied with the machine is made from special alloy steel and grounded to accurate size. The machine is supplied with all equipments required for full Operation.
Hand operated portable hydraulic busbar bending machine ideally suitable for bending flat iron m.s. copper flat bars, round and square bars with hydraulic pressure and reverse pressure control complete with one set of M.S. former for bending bus bars having following specifications. |
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||
|
Automats are extremely versatile machines that give big returns on small investments. Upto 80% of all turning jobs can be profitable handled by these automats with accuracy and precision. These Automats have proved economical for mass production of simple and complex turned parts for Automobiles, Bicycles, Tractors, Diesel Engines, Pumps, Radios and electronics, Sewing Machines, Aircraft and so on. The simple design of these Automats greatly reduces the time for change-over of tooling set-up from one components to another.
STANDARD EQUIPMENTS :
Front & Rear Main Slides, Tailstock Barstop, One Collet With Drill Holder, Electric Drive Motor, Electric Coolant Pump, One Set of Cam Blanks, One Silent Gravity Bar Feed Chest, Trans-parent Splash Guard, Change Gears.
ADDITIONAL ACCESSORIES : (AT EXTRA COST) :
Single Vertical Slide, Double Vertical Slide, Long Turning Attachment (Front & Rear), Various Types of Tool Holders, Finished Cams, Collets Chamfering Attachment, Tooling and Setting.
SPECIFICATIONS | |||||||||||||||||||||||||||||||||||||||||||||
|
STANDARD EQUIPMENTS :
Capacity - 10/7 CFT (300/200 Ltr) 5m3/hr. (1 Bag capacity mixer) without loading Hopper and wheels C.I. Mixing drum and yoke assembly, strong steel chassis.
Mixer is powered by 3 HP, 3 Phase motor. or 5 HP Diesel Engine.
Drive :
Belt Drive
Variable Power : Regulation of pressure by padal varies the power of the working stroke. Selection of just the right power for each job is easy. Easy to Set Up :Rivet sets, dies or special performing tools are easily and quickly installed by fixing them into the M. T. Shank of ram or yoke. Adjustment up or down is at the rate of about 1/16" for each turn of the set. Fast, Quiet, Operation : |
Hand operated Jenny or Burrying machines are designed for edging flanging or burying the edges of all classes of tin plate work of any shape, generally used for edging and flanging bottom and bodies to various angels previous to panning or setting down, double seaming etc. provided with an adjustable guage, a set of rolls and mounting bench.
These machines are useful for curling and wiring of cylindrical bodies and plane sheets, for flanging bodies, blanks and bottoms and for seaming of elbows, bottoms and the like. Cutting operations can be performed, if the machine is provided with cutters. Due to its manifold application this machine has become indispensable for plumbing shops.
Working examples
Using the flanging rolls B supplied with the machine there can be provided rounded with flanges without folds only up to 3 mm height providing curls at bodies for wiring is performed as illustrated beneath.
For closing the curl for wiring closing rolls Z are used, refer to illustrations 5 and 6, after a corresponding ring of wire has been inserted in the curl and attached at several points.
For wiring plane sheets or strips the mode of operation is similar to that illustrated by Fig. 3 to 6. If it should be necessary to close the curl perfectly around the wire special closing rolls S are required, the normal closing rolls Z not being suitable for this propose.
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||
|
Pipe Threading Machines are designed to give maximum efficiency and reliable performance under the most severe conditions of service with minimum maintenance cost. All the necessary requirements are combined in this model to form the basic fundamentals of correct threadings. All the gears are made of case hardened steel with extra large face width and tooth thickness and cut onhobbingmachine for noiseless operation even at high speeds. Naturally they are built with high standards of workmanship, material and quality.
Headstock :
The Headstock is of top quality casting proving support to the spindle bearings. The spindle swing or taper roller bearings are of best steel with a grounded finish to give accurate results. Gears of Head Stock are running in Oil Bath with Oil level window.
The Bed :
The Bed is pillar type having two pillars made of best steel, nicely grounded and also aligned accurately to the headstock alignment.
The Saddle:
The Saddle is fitted on two pillars very precisely. It runs on pillars very smoothly and accurately to the head stockalignmernt.
The Apron :
The Apron gives movement to the Saddle with head transfer along with pillars through steel rack and pi8nion arrangements. Its all gears are made of best steel.
Vice Jaws :
The Vice Jaws are fitted on the saddle with V-ways accurately. The jaws are made of best steel and are well hardened. The movements of jaws are controlled by a screw on the saddle.
Lead Screw :
The lead screw attachment is an extra device which has been arranged to supportthethreadcuttingchassersin big threading machines, only having eleven TPI range.
SPECIFICATIONS | ||||||||||||||||
|
Mechanical roller bearings fittedmotorisedrapid bending machinedesingedto provide a simple, trouble free multitudeofbendingsjobs which might arise in an industry, simple compound and reverse bends can all be formed with the power bender in tubing, angle, channel, extrusions, mouldings, stripstock, bus bars, round or squarerods and all other solid ductile materials. The material is locked between the radius collar and locking pin and, as the mounting plate rotates the material is drawn past the forming nose or a forming roller which can of used for many operation. This arrangement is ideal for a wide suitable; of forming requirements in most solid materials and is especially variable for bending eye bolts as it will form both centered and off center eyes in one operating cycle. The radius capacity of this unit isunusallylarge and any radius desired can be obtained by merely placing acoller
of the required size in the mounting plate. Since the mounting plate allowsbendingsfull 360, it is necessary to use this set-up when forming tubing.angle, channelmouldingsand extrusions in excess of the 280 angle range of the toggle clamp set up. This can be easily accomplished through the use of the proper accessories, eqippedwith 5.H.P.A.C. 440/3/50 electric motor, reduction gear unit, starter, bend locking gauge, angle stop.Locking, pin; radius and forming collar and radius block having bending speed approx 8 R.P.M Capacity standard iron pipe M.S.10swg. I.P.S.1.1/2" centered eye-round mild steel bar (one operation 3/4" centered eyerapindmild steel (two operations) 1", square mild steel bar 3/ 4", flat steel bar bent flat 3/8" x 4", angle 3/16" x 1" x 1", channel 3/16" x 2" x 1" (Prices for various accessories attachment can be quoted against specific enquiry/drawingor sample)
Power Flanging Machines are principally used for forming a right angled flange on curved, straights and irregular shapes. The machine has a tilting head for forming complete circles. Specifications Max. Sheet Thickness : 1.5 mm (16g) in Mild Steel Min. Corner Radius : 100 mm (4 in) Forming Speed : 3m / min. Overall Dimensions Width : 610mm Height : 1000 mm Depth : 610mm Weight : Approx. 100 Kg |
Model AMI 28 : Heavy duty box section, M.S. Body, Double leverage type for quick cutting of light rods, lever retaining spring to hold handle failing off accidently. Model AMI / 16, 20 and 24 are single leverage type.
SPECIFICATIONS | ||||||||||||||||||||||||||||||
|
SPECIFICATIONS | ||||||||||||||||||||||||
|
One head as per the Power flanging machine and the otherhead is fitted with punches to produce the louvers in the rightangle flange to suit button punch snap lock. 1.00 mm maximum.
When used in conjunction with the double headed flanging machine, this makes possible the forming of round bends.
Salient Features : STANDARD EQUIPMENTS :
| |
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
motorised Hydraulic Pipe Bending Machine ideally suitable for bending water (G.I. Pipes), gas or steam pipes without filling or heating etc., with hydraulic pressure and reverse pressure control, hydraulic motorised pump is suitable for operation on AC 440/3/50 electric supply continuously rated with push button starter gives uniform hydraulic output and faster cylinder operation.
The machine is equipped with "EJECT-O-Mactic" device (except Model AMI-6 & AMI-8 which is segmental type) which takes out pipe from the bending former hydraulically. Complete with standard centre former for G.I. Pipes ("C" class), outer formers and head plates etc. Suitable electricals with 3 phase 440 volts with starter, hydraulic trolley
SPECIFICATIONS | ||||||||||||||||||||||||
|
Universal Ironworker so far as the shearing, punching, notching / coping and cropping of flats, plates, squares, rounds and structural sections of any shape are concerned. The coping head is of vary study design and construction and can be easily and quickly turned into a notcher or alternatively into a punching head. Agin it can be fitted with special tool holder and tools for notching T section in both flanges simultaneously. Back stops and gauges can be supplied for production job at extra cost and they will in no way interfere with the shearing of plates or other operations. The standard machine is equipped with clutch : Mechanical hand lever operated
Gears : Made of steel
Motor : AC, 440/3/50 totally enclosed fan cooled with V belts, pulley, Starter and sturdy guards.
Blades : To cut sheets, flats, angles, T, Round, Square bar cutting, V notching or punching attachment (specify while ordering)
OPTIONAL ATTACHMENTS :
|
SPECIFICATIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Head Saving Machines Type BIC are fully automatic and simple in adjustment. The head shaved on these machines are accurate and perfect. |
SPECIFICATIONS | |||||||||||||||||||||||||
|
Standard cube mould to test concrete strength with base plate & locking arrangement.
Size : 150 X 150 X 150
The performance of a Diesel Engine depends upon its injection pump. Diesel fuel pump test benches records and sets the performance of the fuel injection pump to the maximum accuracy. |
APPLICATION:
For testing injection nozzle opening pressure, leakage Spray pattern, atomisation & chatter characteristic tests.
SALIENT FEATURES :
The Nozzle Tester consists of :
STANDARD ACCESSORIES :
Indegenous make hand operated jenny or burrying machine model JNI designed for edging, flanging or burrying the edges of all classes of tin plate work of any shapes, generally used for edging and flanging bottom and bodies to vrious angles previous to planning or setting down, double seaming etc. provided with an adjustable guage, one pair jenny rolls and mounting bench, dia. of rolls 1.1/2" max. depth of gap to guage 5" and handles work of thickness upto 20 swg. complete with handle. (b) do-but model JN 2 having depth of gap to guage 6" with swage rolls instead of jenny rolls. |
Flat S Cleat is used in light commercial and industrial applications and predominantly in residential heating and ventilating installations. It is quick and easy to install and gives a rigid box - frame construction, when used with Drive Cleat on the narrow sides. The Flat S is a shape roll formed on the Rollforming Machine using sheet of 22 gauge and lighter. This design results in a reinforced hem with ample pocket for joining
ducts together top and bottom.
Hand operated slipout type bending rollers are specially designed for bending sheet into complete cylinders or curving them to suit different type of panel work equipped with a set of 3 mild steel properly machined, rollers, two rolls having grooves for permitting sheets previously wired, the front bottom roll has adjustment to suit various thickness of materials being admitted where as the back roll has adjustment for various dia. of cylinders to be formed, slipout type ideal for taking out rapidly formed small dia. cylinders without distortion, mounted on, stand: |
Conduit Pipe Bending Machine for 14 to 24 Gauge Aluminium Copper & Steel Pipes complete with formers of 5/8", 3/4" & 1" or any three formers up to 1". (We can arrange to supply formers in sizes of your requirement up to 1.1/4") |
Floor model Jig Saw/Fret machine having throat depth 24" and table size 14" x 14" and the table can be fitted to 450 on right side and 30 on the left side all other specifications catalogue enclosed herewith electric motor 0.5 HP, 440 volts, motor pulley, v belt starter, light arrangements. |
Formtools, small (20-30 mm dia) : | |
1. 15 x 45 x 75-1 mm seal width 2.0 x 30 x 60-1 mm seat width 3.Counter boring tool | 1 No |
Formtools, -large (30-62 mm dia) : | |
1. 15 x 45 x 75-1 mm seat width 2. 0 x 30 x 60-1 mm seat width 3.Counter boring tool | 1 No 1 No |
STANDARD KIT:
The Standard Kit consists of the basic machine, power control unit, operating tools, carrying case, formtools and pilots as detailed.
WALL MOUNTING BRACKET:
Suitable for fixing all types of cylinderheads. The wall mounting bracket increases the efficiency of the seat cutting operation and reduces operator fatigue. This unit is essential for working on aluminium cylinder heads. (The bracket is supplied along With counter bore special mounting bolts.)
COUNTER BORINGTOOL SETTINGMICROMETFR:
With the use of the optional Counter Boring Tool Setting Micrometer, the counter borecutting tools can be set to any specified diameter.
Chain and Chisel mortising machine provided the most rapid method of producing a perfectly clean and true mortise at one stroke by means of the endless chain cutter of chisel. The head stock is suitable counter balanced for smooth and easy working. The table is compound slide for lateral movement by screw adjustment and longitudinal traverse by hand wheel provided with quick action screw clamp for holding the timber adjustable stops are provided to control the length and depth of motorised and having the following specifications.
|
Are manufactured from suitable case hardening steel, carburised, hardened and tempered and ground to close tolerance as per international standards. Collets are made out of suitable spring steel property heat treated and finished to desired accuracy. They are available in MT and ISO series. Collets are available in metric 3 to 25 mm rising by 1 mm and inenglish 1/8" to 1" rising by 1/16" |