Other Products / Services #4790936

• Tops in quality and long service life.
• Aluminum casing
• The high quality standard is guaranteed by sophisticated production methods and stringent checks, with tight tolerance specifications to ensure ideal functioning and freedom fromleaks.
• Optimized cylinder surfaces minimize cup abrasion and help to maintain the long-term reliability of master brake cylinders

Master Cylinder converts the pressure on the brake pedal to hydraulic pressure by feeding brake fluid into the brake circuit and controlling this pressure according to the mechanical force.

1. Install master cylinder in vehicle in defined position with help of mounting holes provided in casing.
2. Tighten the brake lines properly in master cylinder with help of benzo bolt (Will be provided with the package) in their respective position.
3. Following step is to connect brake lever on master cylinder's piston end, provided with 8 mm hole, the joint is capable of rotating in any direction.
4. At last pour brake fluid DOT3 / DOT4 (both are compatible) up to maximum marked point then tighten the cap properly and install brake fluid reservoir in exactly vertical position so that required pressure of fluid is maintained on piston of master cylinder.

Product features:

• 12 volt LED tail light
• Long lasting and durable material
• Easy to use
• Dual functions tail and stop light

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Briggs & Stratton 691909
• Genuine Briggs & Stratton Spark Plug Boot
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Individually packaged part
• Briggs & Stratton796970
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Briggs & Stratton 491055s
• Spark EMS Plug
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Chopped Glass fiber molded bucket seats designed for racing karts.
• Light weight glass fiber bucket type body.
• All corners with collar for extra strength.
• Flexible side support different driver size adjustment.
• 100 degree back support inclination.
• Designed to fit nearly all heights.

Bucket seat are useful when it comes to perfectly position the driver with respect to the vehicle controls, so that driver reaches the controls as well as feel comfortable while driving during endurance race.

1. Use mounting holes to mount bucket seat on proper position
2. Check proper fitment otherwise it may loose or fall of while riding causing inconvenience to driver or lead to an accident or damage to vehicle.

• Smooth riding hard finish
• Drop-buster configuration over-sized chain plated for landing and grinding
• Nickel plated for rust resistance
• Heavy duty construction for strength

• Normal duty
• Re-lube
• Setscrew locking collar
• Narrow inner race
• Cast iron housing

1. Inner race (ID) of bearing bracket is 25 mm, pass an axle of 24.8 or 24.9 mm outer diameter through inner race of bearing bracket then align axle in center or according to design parameters of vehicle.
2. There are 4 mounting holes provided on bearing bracket which should be in proper sync with mounting holes on vehicle as per design parameters. (Bolt size: M12, i.e. Outer diameter to be 12 mm)
3. Tight bearing bracket with the help of bolts and lock nuts, these will pass through mounting holes.
4. After completing assembly, lock axle with Allen bolts tighten using Allen key, they are provided with bearing bracket and mounted on bearing shell of bearing bracket.

• Self increasing clutch
• Installed with 3 clutch shoes
• Needle bearing with brass support
• Extreme narrow design
• Low maintenance, Lightweight
• Copper bushing
• No modification required

1. Apply some grease on output shaft of the engine, then put key of 5 mm x 2.5 mm on engine's output shaft key-way.
2. Apply some grease on the inner side of centrifugal clutch, Now orient it as such to properly sync both key-ways i.e. of engine & of clutch. (A 5 mm x 2.5 mm key-way is provided in centrifugal clutch housing which perfectly matches with engine shaft key-way)
3. Gently punch centrifugal clutch on engine shaft, after punching it to extreme end of key-way, stop. (Advice: Use mallet hammer to punch centrifugal clutch)
4. Tight centrifugal clutch with provided washer, bolt must be fine thread and of 1 inch in length.(Bolt type: M8, i.e. with outer diameter of 8 mm)

• Steel hub single component machined
• Rigorously tested for machining defects and assuring performance parameters

How to put it in a vehicle?

1. Inner race (ID) of rear wheel hub is 25 mm, so it requires 20.8 or 20.9 outer diameter of axle, this will pass through inner race of hub.Rear wheel hub needs to be assembled on one end of drive axle.
2. Put key of 5 mm x 2.5 mm on axle's key-way.
3. Align hub's key-way with respect to key on axle.
4. Start punching gently on rear wheel hub till it reaches to the extreme of key-way, then fasten lock nut of 20 mm to lock rear wheel hub onto drive axle.
5. Check for proper fitment, there must not be loose.

• Steel knuckle with 6000 DDU bearing
• With tie-rod mounting plate

1. Punch front knuckle bearing which is suitable for as per the knuckle stub outer diameter.
2. Punch front knuckle in the wheel, first check for the outer side of wheel then install front knuckle, afterwards punch other bearing from outer side of rim (Use proper punching equipment to punch bearing otherwise it may get damage)
3. After assembling front knuckle into wheel fasten it properly, use a seat washer before tightening lock nut.
4. Assemble front knuckle into C - clamp of vehicle or as per designed position of knuckle.
5. Make sure steering rod end plates remains facing towards rear wheel.
6. Stub hinge point must be punched with provided bearings upside down.
7. Put washer before installing in between C-clamp of vehicle then pass 10 mm bolt through it and tight it properly with lock nut.

• 2 tie rod hole locations
• Laser cut for perfect uniformity

1. There are three holes provided on pit-man arm with two of them having same bore of 10 mm each and other one having bore size 20 mm.
2. Pass steering column through 20 mm hole on pit-man arm.
3. Get it into a desired position according to design parametersand weld it.
4. Now position POS10 (rod end) with the help of 10 mm bolts which will pass through other two holes of 10 mm provided on pit-man arm.

• Set of four
• Chloroprene rubber dust cover improves boot durability preventing premature failure
• ED coating process conforms to the end of life directive
• High specification grease and ball pin angular movement matches OE specifications for durability even in extreme road conditions
• Coated nylon ball pin seat provides smooth movement of the joint with a rotational torque to OE specifications for long lasting service
• Anti - corrosive protection applied to all products

1. Insert rod end in a 10 mm nut. (This nut is used to lock POS10 with tie rod so that it doesn't loose due to any kind of vibrations or otherwise)
2. Now tighten POS10 on one end of tie rod and pass it through 10 mm bolt using washer, Letting it through eye ball of POS10 tight it with lock nut. (Use washers on both side of eye ball of rod end)

• Length available according to your suitability
• Connect the center link to the steering knuckle on cars with ordinary suspension systems and recirculating ball steering gears

• Light weight aluminium steering with excellent grip and padding
• Sophisticated design
• Easy to install
• No modifications required.
• Offers optimal feel and comfort to driver
• Rigorously tested before shipping

1. Use 6 mm bolts to fasten steering wheel on steering hub (Steering hub to be assembled on steering column), pass these bolts through their respective mounting holes provided on steering wheel.
2. Make sure these bolts are properly fastened.

• A complete single unit aluminium alloy construction
• Light in Weight
• No Modification required

1. Assemble tire on rim.
2. Make sure no hammering or forced action on rim through the process, it may cause damage to rim and may result in tire deflation or crack in rim while riding.

• Ribbed and smooth tires make optimum contact with various work surfaces for easy-flowing traction and a smooth roll.

1. Assemble tire on rim.
2. Make sure air pressure remains between 13 -23 PSI
3. Check for any air leakage

• A complete single unit aluminium alloy construction
• Light in Weight
• No Modification required

1. Assemble tire on rim.
2. Make sure no hammering or forced action on rim through the process, it may cause damage to rim and may result in tire deflation or crack in rim while riding.

• W 207 is BKT's all-terrain tire suitable for ATVs
• Its design provides best traction in all condition
• This tire features an excellent puncture resistance over challenging terrains

• Genuine Briggs Stratton Part Number 19598
• Digital Tachometer/Hour Meter disc
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Helps keep fuel system clean by straining out foreign particles before they reach the carburetor.
• Fuel filter for selected engines with fuel pumps, 75 micron.

• Briggs & Stratton 799719
• Genuine Briggs & Stratton Fuel Tank Cap
• Fits Most 120000 Model Briggs & Stratton Engines
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines.

• Heat treated, and chromed for improved strength
• EN material of knuckle
• Light in weight
• E-Coated for Long Lasting Protection
• Tapered stub axle for extra strength
• Perfectly machined for good quality

• Completely machined column with two bearing support at ends.
• Universal joint provides smooth motion.
• Easy to install and easy to use.
• Light in weight and durable in all conditions.
• Sealed bearings used for complete protection from dust.
• Coated with thin layer of zinc to protect it from corrosion.
• Offers adjustment according to drivers position

Intended primarily for connecting steering wheel to the mechanism or transferring drivers input torque through steering wheel to the steering mechanism.

• Aluminium casing and harden steel rake having threaded ends for rod ends mounting
• Exceed durability levels of OEM steering systems
• Boasts the quickest steering ratio in our market with a responsive
• Offers superior road feel over OEM steering systems due to its simple and efficient design

• Design and materials directly define the longevity of suspension spring.
• AMK's Springs are designed to be as light as possible with intended deflection and at the same time endure the stresses of the extreme conditions witnessed on a BAJA track.

Used to store energy and subsequently release it, to absorb shock, or to maintain a force between contacting surfaces

• Cable has one side MTB and Rod End
• SLR cuttable housing
• Comes with ferrules end caps and wire tightener
• This is a universal component and does not have any standard or OEM model application

1. Use MTB end side on one of the sides of clutch pedal and another end goes into gearbox clutch lever
2. Adjust clutch wire setting with adjusting screw provided on wire make sure clutch wire must be properly tightened and properly lubricated for smoother action

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Excellent resistance to petroleum-based oils and fuels, water and alcohol
• Good resistance to acids and bases, except those with a strong oxidizing effect
• Temperature Range: -40F to 225F; -40C to 107C

• Rugged compact 4 speed manual transmission
• Comes with wet multi-plate clutch
• Including liquid gasket maker, gasket & open end spanner
• Easy to install, no modification required

• Mount the gearbox strictly according to competition rules and design attributes of vehicle with provided mounting holes.
• Put clutch wire into clutch lever (copper colored ) and gear wires into shifter which is onto right side of gearbox (round shape part which consists of slots in which gear-wires are put).

• Lightweight, rugged gearbox that allows operator the selection of three positions: forward, neutral and reverse.
• Easy to install.
• No modification required.
• Long durable gears.
• Short gear shifting due to synchromesh gear type.
• Gearshift through wires.
• This FNR gearbox comes with differential with all aluminum casing, small and compact gearbox works excellent with CvTech CVT or Briggs and Stratton engines.

• Save labor with easy installation methods.
• Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking.
• Instant and quick, Boots are installed without special tools.

CV refers to constant velocity joints, which are used to transfer a constant force to the wheels as well as supporting the movement of the suspension system. CV boots attach to the ends of a drive shaft, protecting it from water getting in and grease getting out.

• High clamp pressure plate
• Assurance of smoother engagement with longer life
• Excellent drivability with high torque capacity
• No modifications needed, ready to assemble product

A clutch is a mechanical device that engages and disengages the power, transmission, from driving shaft to driven shaft.

• Align clutch's internal splines with clutch housing shaft's splines (Use clutch washer for proper alignment, if in case clutch fits properly then no need of washer).

• 01 Unit: Multi-plate type clutch
• 02 Unit: Washer

• Set of 4
• Both sides are of flat strong steel and in between rubber to absorb all the vibrations.
• One end has two mounting 8 mm holes on the other end 8 mm fixed bolt provided for perfect installation.
• It is designed to provide maximum control of all engine harmonic vibrations, regardless of the rpm at which they occur and regardless of the crankshaft's natural frequency. This translates to maximum protection of the crank, main bearings, related engine components and more consistent power output.
• It is maintenance and repair free.

• 8.8 Grade Bolts with Nylon lock nut
• Contains all Nut and Bolts used in Steering assembly

• 8.8 Grade Wheel Stud & Nut
• High quality Stud & Nut
• High Strength
• Price for unit Stud & Nut

• Aluminium alloy rim
• 12 inch diameter
• 8 inch Width
• 4 Bolt mounting holes PCD 100 mm
• Suitable for tubeless tyres

• Contains one unit of front bumper, two units of side bumpers, One front nose and one rear spoiler
• Light weight impa
• ct absorbing glass fiber bumpers with aerodynamic design
• Easy to install

1. Check for alignment of mounting points on vehicle and bumper.
2. Mount it carefully, do not damage it in process.

1. Check for the particular sides of mount from the two side bumpers
2. Use mounting points to mount side bumper
3. Mount them carefully, do not damage it in process.

• Dual pistons, Floating caliper unit
• Light weight
• Cost effective yet powerful alloy and steel brake components for maximum durability
• Efficient design reduces moving parts for longer lasting performance
• High quality brake caliper guarantees desired stopping distance.
• Allows better clearance to the wheel as compared to fixed type caliper.
• Tested with 100 percent pressure to ensure proper braking function.

Brake caliper assembly accommodates brake pots (pads) and pistons. When pressure is applied on the brake pedal, brake fluid through the brake lines reaches the caliper assembly, where the pads get in contact with the disc rotors to apply the braking force and in turn helps in retarding or stopping the vehicle.

1. Install caliper with help of provided mounting holes over the mounting on knuckle.
2. First put caliper on disc with gap between brake pad then sync mounting holes of caliper plate with knuckle mounting holes. (Bore of caliper mounting plate hole: 8 mm).

• Direct fitment ready to install
• Provides with better braking in dry as well as wet weather conditions.
• A better and responsive system ensures you always brake with confidence.
• Silver zinc plated for rust protection on non friction areas
• Slots increases stopping power by 15-20 % also increased cooling effect
• Heat treated hence better protection against thermal cracking, juddering, and distortion

• Disc plate comes with 3 point mounting holes with 10 mm bore.
• These 3 holes must be put properly sync with the holes on hub and then assemble disc plate with the help of given 3 bolts ( these bolts will be provided with disc plate) make sure these bolts are properly fitted and hence product is ready to use.