AMTECH

Ashram Road, Ahmedabad, Gujarat

AMTECH Single piece design Ball valves are the right ball valve for just about every conceivable application. They are available made from bar stocks sand casted , investment casting in various materials, likes SS 304, SS 304L , SS 316 , SS 316L , IC CF8, IC CF8M, IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America , Asia and Gulf Countries .Sizes -1/4" to 4"(6 NB TO 100 NB).We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH Three piece design Ball valves are the very easy mounting and easy maintenance online off line with change of seat and seal in every conceivable application. They are available made from bar stocks sand casted , investment casting in various materials, likes SS 304, SS 304L , SS 316 , SS 316L , IC CF8, IC CF8M, IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America , Asia and Gulf Countries .Sizes -1/4" to 6"(6 NB TO 150 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH Three piece design Ball valves can be operated by the actuator, on off type, with limit switch / with solenoid valves as per customer requirements. Valves are available made from bar stocks sand casted , investment casting in various materials, likes SS 304, SS 304L , SS 316 , SS 316L , IC CF8, IC CF8M, IC CF3, ICCF3M .AMTECH SINGLE PC design are regular exporting valves to Europe, America , Asia and Gulf Countries .Sizes -1/4" to 6"(6 NB TO 150 NB). We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH single piece design Ball Valves are manufacturer as per standard BS 5351 norms in variety of materials like CS body, CI body, SS 304, SS 316 body and Bronze / GM. Ball valves have end connections Flanged with body one piece design, these valves are more suitable for vacuums applications.We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH offers Forged C.S.-A 105 Ball valves 3 PC design.These valves are heavy duty normally called 800# and 600# Rating. We are using the Internals trims of valves Stainless Steel 304 & 316 Grades as per the applications of valves. Our valves used in the major industrial applications.The Forged Body made from A 105 Carbon Steel and Forged SS 304 or Forged SS 316 can be available on the request.The end connections of valves are socket weld, Screw End , butt weld end valves and flanged valves.These valves are designed as per BS 5351 and sizes -1/2 inch to 2 inch. The valves as mfg. as per 300#, 600# & 800 # Pressure Rating . We are providing the PTFE/CFT as Seat and Seal.Our Valves are operating at very high temperatures up to 300-degree celcious. We also design special valves for operating at high-pressure up to 9000 PSI for special applications.We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies

AMTECH JACKETTEDBallvalves offer all the proven design attributes of standard 2-way valves and are available in a wide range of different jacket connections. Typical applications:Am Tech jacketed valves are especially used for media that might crystallize or seize and therefore must be influenced through additional heating or cooling. Design Features and Benefits:The welded jackets consisting of two shells reach from flange to flange and assure consistent valve heating or cooling of the process media to prevent crystallization or seizing of flow media. This applies especially to media like bitumen, liquid sulfur, resins, etc. In addition, the efficient flow of media is ensured through the elimination of pockets. Oil, steam, water, brine can be used as carrier for heating or cooling media. The special valve design allows the hydrostatic and pneumatic examination of the valve body prior to the jacket welding process. Following our quality assurance rules, every valve is tested again after the jackets have been welded to the body. Valve Design:Am Tech jacketed valves can be supplied as 2-way or 3-way versions with flanged ends. Screwed or weld ends are available upon request as well. We manufacture valves from genuine guaranteed raw material with material test certificate , hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH offers Butterfly valves suitable for simple as well as highly complex ones. Our Butterfly valves are rubber lined, PTFE lined, metal to metal sealing and high performance duty. AMTECH Butterfly valves are suitable as either open/closed or rare application in regulating valves. They are available in a wide variety of sizes, materials and models. Butterfly valves can be operated with various controls actions like electric / pneu, atic actuator options. Our Butterfly valves are widely used in water, process industries and marine for chemical and corrosive duties. We offers a range of valves with specially designed for pharmaceuticals, foods & beverages, starch industries, metal and minerals industries.We manufacture valves from genuine guaranteed raw material with material test certificate, hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH MAKE Butterfly valves EPDM/Nitrile/Silicon/Viton/Hypalon rubber lined, PTFE lined, metal sealing High Performance butter fly valves with CI/Sgiron/SS/discs inside with Nylon coated or Epoxy resin painted . Butterfly valves are suitable as either open/closed or regulating in Electric operation as wekk as pneumatic operation valves. They are available in a wide variety of sizes, materials and models. Butterfly valves can be fitted with various controls and actuator options 24 v DC , 230 V AC , 410/430 V three phase /single phase etc. Our Butterfly valves are widely used in water, process industries and marine for chemical and corrosive duties. We offers a range of valves with specially designed for pharmaceuticals, foods & beverages , pulp, paper , cement, chemicals, water treatments , oil, petrochemicals , pipe manufacturers, dams water line , municipal corporations, oil refineries, edible oil plants etc.

Amtech Double Flange Butterfly valves are centre disc design and offset disc design , with Flow control Lever operation Gear operation as well as Pneumatic cylinder/ Pneumatic Actuator operated and Electric operation with single phase or three phase. We manufacture valves from genuine guaranteed raw material with material test certificate, hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

Amtech wafer design lug type Gear operated- butterfly valve with lever operated and soft seated seat in nbr /nitrile/silicon/viton/ptfe or any other type as per customer requirements. We manufacture valves from genuine guaranteed raw material with material test certificate, hydraulic test certificates , Mill TC 3.1.b available with all supply. Also , we can provide valves with third party inspection agencies.

AMTECH Dual plate check valves is most suitable foe water pumps, chemicals pupms and oil gas applications. Body of DPCV are CI, CS, SS304, SS 316 or any specific materials with the Disc of same materials as well as other materials.Dual plate NRV is soft seated with Nitrile, Neoprene, Silicon , Viton is suitable for vaccum application.We have sizes from 50 mm to 900 mm.

AMTECH Dual plate double flange check valves is most suitable foe water pumps, chemicals pupms and oil gas applications. Body of DPCV are CI, CS, SS304, SS 316 or any specific materials with the Disc of same materials as well as other materials.Dual plate NRV is soft seated with Nitrile, Neoprene, Silicon , Viton is suitable for vaccum application.We have sizes from 50 mm to 900 mm.

AMTECH forged Non Return Valve which is suitable for High pressure line of oil, gas, water, refining, steam etc. Non return valves are available in forged body A 105, F 22 , F 11 , F 304 , F 316, and other special alloy steels.We have 800#, 1500#, 2500# design check valves.

AMTECH Lift up Non Return Valve in common with all Non Return Valve, are used to prevent back flow in the line, and operate automatically, according to increases or decreases in line pressures. Flow through a Lift up Non Return Valve is the same as a globe valve. The disc raises up off of the seat as pressure below the disc increases, while a drop in pressure on the inlet side and a build up of pressure on the outlet side causes the valve to close. Back pressure in the line holds the disc in the closed position.

AMTECH Wafer type non return valves are suitable to mount between two flanges of 150#, 300#, Table-D, E or as per customer requests.Theses valves are easy install it.Also cost is very economy compare to other valves. The disc will open in the pipe dia. The back pressure of oil, gas, water, or steam can be withstand with soft seats like Neprene, Ptfe , Silicon or Viton rings.Any materials valves can be manufactures for all applications.The body material is CI, CS, SS 304, SS 316, Bronze, SS 304L, SS316L, Aluminium etc.

AMTECH THREE Way Control Valve is a rigid and comparatively compact type , which is designed to work very accurately various media like control water, oils, steam, and other industrial fluids. Three way valve package is accurately perfect and suited to address the space limitations of the the OEM industry.Three Way control valve is durable , very reliable, and easy to select. The internal valve trims are mfg and designed in SS 304/SS 316 to ensure long service life to avoid maintenance cost. We have three way control valve may be used for both converting and diverting applications. Amtech Three Way always meet the both EN and ASME standards. The valve is operated with pneumatic diaphragm operated , as well as we have design for electric operated. Also , We can provide position controller.

We offer a high-quality Motorised Control Valve, Size 150, with a Flanged connection type and PN16 pressure rating. Operating at 24V DC, this Two Way valve has a temperature rating of up to 120C and power consumption of 20W. Ideal for precise control in various industrial applications, our motorised valve ensures efficient and reliable performance. Trust our expertise as a leading Manufacturer to provide you with a durable and efficient solution for your control valve needs.

AMTECH offers gate valve -150 to 600 class in Flanged end , 800 to 2500 class in Threaded / buttweld/ socket weld end.Gate valves are generally designed to serve as isolation valves. In service, these valves are either fully open or fully closed. When Gate valves fully opened , the media which flows through the valve in a straight line with very little resistance. Gate valves must not be used in the regulation or throttling of flow media because of accurate control is not possible. Also , high-flow velocity of media in partially opened valves may cause erosion of the discs and seating surfaces area. The Vibration of wedge may also result in chattering of the partially opened valve disc. Gate valves are also operated by chain pulley when they mounted at height in plant. The Gate valves are used in thermic fluid with high temprature upto 350 degree.

AMTECH make - DIN standard flanged globe valve, Design of DIN standard Globe valves are limited to DN200 because media high forces exerted by the fluid pressure on the disc surface area which make it very difficult to operate the valve for larger sizes. DIN standard Globe valve has below advantages: DIN standard Globe valves has good regulating capability as well as positive shutoff. DIN standard globe valves has faster operation than gate valve . DIN standard Globe valves are solid build, available in high pressure classes (but limited in size) Description: DIN standard flanged globe valve as below : Size: " to 10" (DN15-200) Pressure: PN 16, PN 40 .Material of construction: WCB, LCB, LCC, WC1, WC6, WC9, C12, C5, CF8, CF3, CF3M, CF8M, CF8C Design & Manufacture Std.: BS 1873, Face to Face Std.: DIN 3202, BS2080 F1, F2 Test Standard: ISO5208, BS 6755 DIN 3230 End Connection Std.: DIN2543-2548 Structure Type: S-Pattern Operated Way: Handwheel, Bevel Gear, Pneumatic, Electric operation

AMTECH has Globe Valves of sizes 1/2"(12 mm) to 14" (400 mm) in 150#, 300#, 600# casted/forged valves in standard body materials, standard seat and seal materials. Globe & gate valves can be available with extended spindle and conventional port, body and bonnet shall be bolted bonnet type and also hermetically sealed with stellited seats. AMTECH manufacturers of bellows seal valves for special applications. AMTECH Globe valves are most suitable for boiler plants services, continuous process plants , cryogenic applications and space research institutes and acid plants, power and utility boilers, co-generation systems , chemical recovery boilers , wood-fired boilers, solid waste fuel-firing systems, circulating fluidized bed (CFB) boilers, Industrial waste recovery and incineration plants.

AMTECH forged steel Globe Valves are made from Forged -A 105, Forged A 015N , F-11, F-22, F-304, F-316, F-304L and F-316L etc. We have 800#, 1500# and 2500# rating valves. We manufacturers above 1500# rating valves sealweld design consider safety factor.

We offer a high-quality Forged Steel Globe Valve designed for Class 800 applications. With threaded end connections, this valve has a pressure rating of 800 Psi and can withstand temperatures up to 1000F. Ideal for industrial use, our manual operation valve ensures reliable performance and durability. Manufactured with precision using forged steel material, this globe valve is a top choice for various applications requiring a reliable flow control solution.

We offer high-quality Forged Steel Globe Valve 150 designed for various applications. Available in standard sizes with options for flanged or threaded end connections. Choose between manual or actuated operation based on your needs. Our forged body ensures durability and reliability, making it ideal for industrial use. As a leading manufacturer, we provide top-notch products that meet industry standards and exceed expectations. Trust our Forged Steel Globe Valve 150 to deliver exceptional performance and longevity in your operations.

AMTECH Needle valves are specially made for general instrumentation services. Our valves are very high quality precision machined, regulating and shut-off valve. The compact, reliable and unique designed features within the valve enable it to be used for the most sevices.Pressure rating 150 psi, 300 psi, 1000 psi, 3000 psi, 6000 psi, 10000 psi.

AMTECH Flanged end Needle valves are specially made for general instrumentation services to be used for process industries. Our needle valves are very high quality precision machined, regulating and shut-off valve. The compact, reliable and unique designed features within the valve enable it to be used for the most services.

AMTECH Flush Bottom tank valves are designed to provide drainage and dead space free shutoff for reactors, vessels and storage tanks. The dead space free shutoff is accomplished by placing the valve seat flush with the bottom of the vessel. This eliminates any buildup of product within the vessel nozzle itself. Advantage of Disc type is short stroke for open/close operation, this valves are also manufacture with jacket for semi solid /thick material need heated before it will flow easily.We also provide gear pneumatic cylinder/ electric motor operation.

AMTECH Flush Bottom tank valves are designed to provide drainage and dead space free shutoff for reactors, vessels and storage tanks. The dead space free shutoff is accomplished by placing the valve seat flush with the bottom of the vessel. This eliminates any buildup of product within the vessel nozzle itself. Advantage of Disc type is short stroke for open/close operation, this valves are also manufacture with jacket for semi solid /thick material need heated before it will flow easily.We also provide gear pneumatic cylinder/ electric motor operation.

AMTECH Pinch valve is suitable for corrosively liquors & slurries. The valves efficiently handles clear liquids or gases. when the valve is open, flow resistant is negligible. there is absolutely no possibility of chocking of pinch valves.

Amtech Air pinch valve require Air or liquid pressure is inserted in the cavity of AIR PINCH VALVE body- so, it control inlet collapses the internal rubber sleeve to provide immediate and positive shut-off. The rubber sleeve closes completely, even on large particulate matter, abrasive and corrosive materials.If we open, the sleeve allows full, unobstructed flow with little turbulence. Air pinch valve sleeves can be easily and economically replaced when they wear out. The sleeve material is specially design for abrasive slurries. The Air pinch valve is fully automated valve, with easy operation and maintenance. We recommad customer to order spare sleeve for any type of pinch valves so , maintenance can be done easily, it will also cost down , because no need to purchase the whole valve.

AMTECH Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body, CI body, SS 304, SS 316 body and Bronze / GM Plug valves have end connections as per customer requirements.Our plug valves have Screw end , Socket Weld End and Flanged End connections.We have two way as well as three way Plug Valves.

Technical details : BODY & BONNET COVER: FORGED C.S- A 105 INTERNAL PLUG: C.S. /SS 304/SS 316 SEAT: PTFE TEFLON THREAD END AS PER YOUR REQUIREMENTS STUD NUT: HIGH TENSILE HANDLE : MS WITH GOLDEN ZINC PLATED WITH PVC GREEP HYDRO TEST: BODY & SEAT: AS PER 300# RATING AMTECH CASTED Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body, CI body, SS 304, SS 316 body and Bronze / GM Plug valves have end connections as per customer requirements.Our plug valves have Screw end , Socket Weld End and Flanged End connections.We have two way as well as three way Plug Valves.

AMTECH OFFERS PLUG VALVE in Design Standard : BS 5158 , Self Lubricated and non lubricating design with Regular Pattern two way , Regular Pattern 3 Way, Regular Pattern 4 Way, Screwed & Flanged Ends and HIGHER CLASS IN -Forged body plug valve.AMTECH Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body, CI body, SS 304, SS 316 body and Bronze / GM Plug valves have end connections as per customer requirements

AMTECH Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body, CI body, SS 304, SS 316 body and Bronze / GM Plug valves have end connections as per customer requirements. We offer plug valves have Screw end , Socket Weld End and Flanged End connections.We have two way as well as three way Plug Valves.Non-lubricated plug valves contain a polymeric body liner or a sleeve, which is installed in the body cavity. The tapered and polished plug acts like a wedge and presses the sleeve against the body. The nonmetallic sleeve reduces the friction between the plug and the body. Like for soft-seated ball valves, non-lubricated plug valves are limited by temperature and chemical compatibility of the non-metallic materials used. Non-lubricated plug valves are used instead of lubricated plug valves, where maintenance needs to be kept to a minimum. They can be used in special services (e.g. sulphur and hydrogen fluoride), since they do not have a body cavity in open communication with the flow when switching, where fouling liquids could be trapped or solidify, potentially jamming the valve. These valves are not torque seated.Technical details : BODY & BONNET COVER: FORGED C.S- A 105 INTERNAL PLUG: C.S. /SS 304/SS 316 SEAT: PTFE TEFLON THREAD END AS PER YOUR REQUIREMENTS STUD NUT: HIGH TENSILE HANDLE : MS WITH GOLDEN ZINC PLATED WITH PVC GREEP HYDRO TEST: BODY & SEAT: AS PER 300# RATING

AMTECH OFFERS SS PLUG VALVE FLANGED END in Design Standard : BS 5158 , n design with Regular Pattern two way - Screwed & Flanged Ends and HIGHER CLASS IN -Forged body plug valve.AMTECH Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body, SS 304, SS 316 , SS 304 L , SS 316L -body valves have end connections as per customer requirements

AMTECH Valves offer PRESSURE REDUCING VALVE with minimum tolerance of results of PRV.We are mfg. the valves in Globe Type Pressure Reducing Valves & Angle Type Pressure Reducing Valves. Size ranges : 1/2" to 12" (15mm to 300mm) Or other Required sizes. Pressure Classes :150 # to 300 # Or Required. Material of constructions :All types of Cast Steels and Alloys steels. End Connections :Flanged End , screwed End BSP-F or NPT F , as per BS, ANSI, DIN & ISS Actuator :Pneumatic Diaphragm type, Spring & Diaphragm type neoprene rubber diaphragm with canvas reinforced , Viton Diaphragm and Silicon Diaphragm. Press Controller for valves : All Pressure Reducing valves Pressure controller are in different range as requirement.

AMTECH offers Investment Casting SS 304(CF 8) and SS 316(Cf8M) strainers for all industrial and domestic filter applications. Body of strainer is one pc design casting, strainer element is SS 304 or SS 316 with suitable mesh strainer element. End connections as per customer requirements like Bsp-F, Npt-F end.

AMTECH offers Cast Steel -Y type Strainer -150# and 300# in CS ASTMA 216 GR WCB/ Forged Carbon Steel A 105/Cast iron Casting- Y type strainers for all industrial and water lines filter applications. Body of strainer is one pc design casting , the strainer jail/element made from SS 304 or SS 316 or any suitable material and mesh size. We also provide double strainer element for fine filtrations. We have other filters like conical strainer and basket strainers etc. We can fabricate any special filter as per Drawing.We have Y strainer Sizes range from 1/2" to 12" in flanged end connections.We can provide additional Drain plug as per customer request.

AMTECH Basket type Strainers widely used in Filter plants.Filters are fabricated as per customer requirements like 20 mesh, 40 mesh, 60 mesh, 80 mesh , single filter element and double filter element. This filter has wide area of filtrations, require near pump in industry. The strainer element is very easy to replace from opening top. The pot strainer can be provided with pressure gauge to measure inlet and outlet of strainer. The life of the basket/bucket strainer is long compare to y strainer. We can manufacture sizes upto 24"

AMTECH Pot type Strainers widely used in Filter plants.Filters are fabricated as per customer requirements like 20 mesh, 40 mesh, 60 mesh, 80 mesh , single filter element and double filter element. This filter has wide area of filtrations, require near pump in industry. The strainer element is very easy to replace from opening top. The pot strainer can be provided with pressure gauge to measure inlet and outlet of strainer. The life of the basket/bucket strainer is long compare to y strainer.

AMTECH Tee/ "T" strainers designed to remove foreign particles from pipeline in process industry. Tee Type Strainers had a economy compare to basket / pot/bucket strainer to large nominal bore diameter has straining area . This strainer can be mounted into vertical or horizontal piping and can be configured for right-angled applications. Tee strainers are supplied with fine to coarse or vice-versa filtrations to ensure that the system is running at the required cleanliness level in full load operation. Tee strainers are features either bolted cover or quick opening covers for application suitability. Tee strainers are used where a compact accessible strainers is needed for protection of pumps, valves and similar equipment.

AMTECH-WEIR-A TYPE DIAPGRAGM VALVE SCREW END has Body material is CI, CS, SS 304, SS 316, SS304L , SS316L , threaded valves are Unlined. The sizes of Valves are 1/2" to 4" , all valves are pressure rating PN 10, PN 16 etc.

AMTECH DIAPGRAGM VALVE TC END is recommended for pharmaceutical, water treatment and other application. The Body material is SS 304, SS 316, SS304L , SS316L.These Tri clover end (TC end) with mirror finish and with diaphragm special grade for pharmaceutical. The sizes of Valves are 1/2" -2" The Diaphragm valve was developed for use in non-hygienic applications, but now a days designed was adapted for use in the bio-pharmaceutical industry by using compliant materials that can withstand sanitizing and sterilizing methods.

AMTECH DIAPGRAGM VALVE TC END with electric and pneumatic actuator is recommended for automation pharmaceutical , water treatment and other application. The Body material is SS 304, SS 316, SS304L , SS316L.These Tri clover end (TC end) with mirror finish and with diaphragm special grade for pharmaceutical. The sizes of Valves are 1/2" -2" The Diaphragm valve was developed for use in non-hygienic applications, but now a days designed was adapted for use in the bio-pharmaceutical industry by using compliant materials that can withstand sanitizing and sterilizing methods.

AMTECH makes high performance Knife Edge Gate Valves features with design suitable for specific media.We have unidirectional knife edge gate valves. The gate of knife edge gate valve is made from SS 304, SS 316, SS 410 and we can do the special treatment for increase the life span. A wide variety of hardened trim options are also available for the Gate, Seat and Wear Rings. Knife-Edge Gate Valves withstand high temperature & abrasive slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.We mfg special valves for the Power plants with quick opening design.We have soft seated valves with Teflon , Nitrile, EPDM, Viton, Silicon etc. Please click on the links below, to know more about each of the knife gate valves.

AMTECH makes high performance Knife Edge Gate Valves features with design suitable for specific media.We have unidirectional knife edge gate valves. The gate of knife edge gate valve is made from SS 304, SS 316, SS 410 and we can do the special treatment for increase the life span. A wide variety of hardened trim options are also available for the Gate, Seat and Wear Rings. Knife-Edge Gate Valves withstand high temperature & abrasive slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.We mfg special valves for the Power plants with quick opening design.We have soft seated valves with Teflon , Nitrile, EPDM, Viton, Silicon etc. Please click on the links below, to know more about each of the knife gate valves

AMTECH offers PTFE lined ball valves in FEP/FPA lining. Ball valves always bidirectional valves. The ball shaft in centre can be optionally connected to a pneumatic/electric actuator over an adapter or equipped with a manually operated lever. Ball is sealed in the PTFE lined body with exchangeable seat rings PTFE . The ball shaft is sealed with a maintenance-free. Fail-safe position Depending on the version of the single-acting rotary actuator, the ball valve has two fail-safe positions which become effective when the actuator is relieved of pressure as well as when the supply air fails: Control valve CLOSED without supply air The ball valve closes when the supply air fails when single acting actuator.But in Double acting actuator valves required air supply to pen and close valve each time. We have variety of materials of construction, two piece design valves, ASA 150#, PN10, PN 16.

AMTECH FEP and PFA lined, Ductile Iron, Cast Carbon Steels- ANSI Class 150 flanged Plug Valve It can be equipped with a manual handle or with pneumatic or electric actuators. A full range of accessory items are available including limit switches, solenoid valves, positioners and manual override devices

AMTECH offers Weir A Type, Bolted Bonnet, Two Way, Manually Wheel as well as pneumatic and electric Operated, Fully FEP/PFA Lined Diaphragm Valve with Position Indicator.MOC of valves in Sg iron /Ductile, Cast Carbon Steel, Stainless Steel Body.Sizes range from 2" to 8"Our PTFE-TEFLON LINED Diaphragm valves has easy installation, easy operation and suitability of replacement. Flow through the valve is streamlined and it is easy to line the valve in order to increase chemical or abrasion resistance. Hand Wheel operation, pneumatically, hydraulically and electrically operated valves are available for automatic control of complex processes.

AMTECH Offers Cast Ductile Iron and Cast Carbon Steels and Stainless Steel- FEP/PFA Lined Butterfly Valve sizes from 2" to 24" which are very high in satisfactory Performance. Tight Shut Off, Bi-directional, Wafer or Lug Style, Slim Seal, Integral Stem & Centric Disc Design, Lever / Gear/Pneumatic/Electric Operated which are suitable for chemical corrosion & temperature resistance. All our valves widely exported to Europe/Asia/gulf/American countries. Butterfly valves upper and lower valve body are assembled together With bolts and seat ring incorporated .Valve Disc and wetted part are PTFE -(PFA/FEP) Lined.

AMTECH Offers ball check valve have PFA /FEP lined as standard lining and uses the cast dovetail recesses and machined grooves to lock the liner to the body casting, to prevent flow opposite side.Amtech offers fully-lined ball check valve is now available in DIN, ASME short and standard pattern designs, and offers a flexible seat for Class A and API-598 Sealing, best-in-class for media backflow protection of processes and equipment.Amtech fully-lined products are a reliable alternative to expensive alloy valves.

AMTECH Offers wafer type check valve -flap is PFA /FEP lined as standard lining and uses the cast dovetail recesses and machined grooves to lock the liner to the body casting, to prevent flow opposite side.Amtech offers fully-lined wafer type check valve is now available in best-in-class for media backflow protection of processes and equipment.Amtech fully-lined products are a reliable alternative to expensive alloy valves.

AMTECH OFFERS PTFE / FEP / PFA lined double window sight glass/sight flow indiactor, Double windows sight glass provides clear visual flow indication on any corrosive service as all internal components other than glass have been fully lined with either PTFE, FEP, PFA depending on application. Both the glasses are bolted with the body. Fluids can be viewed from either top or bottom side. Teflon Lined Double Window Type Sight Glass (Sight Flow Indicator) is available in Casted body & Fabricated design in higher size to inspect the inline process fluid, Sight glass contains two borosilicate toughened glasses mounted opposite to each other.Sizes available 25 nb to 800 nb , End Connections as per ANSI B 16.5/BS 10 Table/DIN/IS 6392 Std.

AMTECH offers all types FEP/PFA lined Fittings available.Lined Elbow, Tee, Reducer & flanges in best quality.Amtech regularly exporting and supplying PTFE Line Pipings. We are offering piping mfg. of a seamless ASTM A106, SCH-40 steel pipe and is confirmed to the requirements of ASTM F1545. We supply these products with fixed or loose flange design and drilling specifications up to 8" NB sizes. Our fittings best suitable for compensating thermal expansion, very safe against vacuum, very resistance to thermal contraction, and protection against permeation. The thermal equilibrium prevents fatigue cracking failure between the tube and flared section of the liner. We also have Jacketed Lined pipes are also available as a solution to customer's typical applications and uses.

AMTECH valves offer the sight glass in single window and Double Window design.The glasses are made from Borosilicate toughend glass.To view the flow online in line.

AMTECH valves offer the Double window sight glass.The glasses are made from Borosilicate toughend glass.To view the flow online in line , with Glass both side in parallel to flow line. Rhese dou

AMTECH specialize in the Safety Valves, Safety Relief Valves and Relief Valves. We offer our safety valves, safety relief valves and relief valves to a number of industries including, but not limited to Chemical, Petrochemical, Refining, Power, Pulp and Paper, Oil and Gas, Sugar, Hospitals and Colleges worldwide. In addition to servicing our local and national markets with our safety valves, we also have a business presence established in Europe, Australia, Mexico, Middle East and Latin America. Regardless where you are located, we can provide a safety valve to suit your needs.

AMTECH specialize in the Safety Relief Valves. We offer our safety valves, safety relief valves and relief valves to a number of industries including, but not limited to Chemical, Petrochemical, Refining, Power, Pulp and Paper, Oil and Gas, Sugar, Hospitals and Colleges worldwide. In addition to servicing our local and national markets with our safety valves, we also have a business presence established in Europe, Australia, Mexico, Middle East and Latin America. Regardless where you are located, we can provide a safety valve to suit your needs. Safety valve is a valve that opens automatically to relieve excessive pressure.Safety valve is giving harmless vent to feelings of tension or stress.

AMTECH manufacture angle type safety valve threaded or flange type in various materials for wafet/ air/ compressure/ vacuum system , and any other specific field for customer requirements. Angle Pattern, Enclosed Discharge, Screwed Male Threads at Inlet and Screwed Female Ends at Outlet to BS 21 OR bsp-MxF , npt-M x F design as well as flanged end design. We are providing soft seated and metal seated valves. The soft seat from rubber- viton /silicon / Teflon seated. We also prove Hard face in seat material like stellited ST6.

AMTECH offeres forged pneumatic fittings made through the closed die and upset forging process and from the rods of SS 304 and SS 316 or any matrials, and in many different conditions starting from forging to sub assemblies. Our products are mostly consumed in Petrochemical Plants, oil refinery, Boiler lines, cooling tower, construction equipments, fire fittings installation and all where there is pressure line It is consumed in many other fields also. We offers ASTM B16.11 Forged Fittings and Bar stock fittings , 90 Forged Elbow, End type : Socket Weld, Threaded (NPT/ BSP) Material : A105, SS 304/316, Pressure : 2000, 3000 and 6000 Lbs, Size : Inch to 4 Inch.Operation : Precision Dimension Control and Radius matching inside bore and superior gauge control by threading with CNC Lathes

AMTECH Forged Tee and Bar stock TEE with End type : Socket Weld, Threaded (NPT/BSP), and Material : A105, SS 304/316 , Pressure : 2000, 3000, and 6000 Lbs, Size : Inch to 4 Inch , Operation : Precision Dimension Control and superior gauge control by threading with CNC Lathes.

AMTECH offers COUPLINGS (FULL AND HALF) FROM BAR STOCK with End type : Socket Weld, Threaded (NPT / BSP) and Material : MS, ASTM A105, SS 304/316 , with Pressure : 2000, 3000, and 6000 Lbs , our Size : Inch to 4 Inch. Operation : Precision Dimension Control and superior gauge control by threading with CNC Lathes

AMTECH OFFERES Hex Nipple, Hex Plug, Cap, Bushing, Unions , with End Type : Threaded (NPT/ BSP), Socket Weld, Material : MS, ASTM A105, SS 304 / 316, Pressure : 150 lbs to 6000 lbs, Size : Inch to 4 Inch.Operation : Precision Dimension Control and superior gauge control by threading with CNC Lathes

AMTECH offeres Forged Flanges in Slip on, Weldneck, Lap Joint, Blind, Plate Flange , with MS, ASTM A105, SS 304 and SS 316 , Pressure : 150 lbs, 300 lbs , Schedule : 20, 40, 80, 160. Size : Inch to 12 Inch. Operation : Precision Dimension Control.

AMTECH Foot Valves prevent the pump column from draining upon pump shutdown. Silent during operating and normally closed, the valve has a center-guided disc with a Buna-N seat to provide a drip tight seal. FOOT VALVE SCREW END BSP-F Valve Features : Resilient seat provides positive shut offFull flow areaRugged construction for long life Standard MaterialsCast iron body Bronze disc and seat ringStainless steel spring and inlet screenBuna-N resilient seat

AMTECH Foot Valves prevent the pump column from draining upon pump shutdown. Silent during operating and normally closed, the valve has a center-guided disc with a Buna-N seat to provide a drip tight seal. FOOT VALVE FLANGED END Valve Features : Resilient seat provides positive shut offFull flow areaRugged construction for long life Standard MaterialsCast iron body Bronze disc and seat ringStainless steel spring and inlet screenBuna-N resilient seat

AMTECH Foot Valves prevent the pump column from draining upon pump shutdown. Silent during operating and normally closed, the valve has a center-guided disc with a Buna-N seat to provide a drip tight seal. FOOT VALVE FLANGED END Valve Features : Resilient seat provides positive shut offFull flow areaRugged construction for long life Standard MaterialsCast iron body Bronze disc and seat ringStainless steel spring and inlet screenBuna-N resilient seat