Belts #121721

Details :

• Rubber Timing Belts Range - MXL, XL, L, H, XH, XXH, DXL, DL, DH,
• HTD - 3M, 5M, 8M, 14M, 20M, TP5M, TP8M, TP14M.
• STD - S3M, S4.5M, S5M, S8M, S14M, DS5M, DS8M, DS14M.
• RPP - RPP 5M, RPP8M, RPP14M, RPPD5M, RPPD8M, RPPD14M.
• Mega Torque - MTS8M, MTS14M.
• PG GT/GT2: 2MGT2, 3MGT2, 5MGT2, 8MGT2, 14MGT2.
• PG GT3 - 2MGT3, 3MGT3, 5MGT3, 8MGT3, 14MGT3.
• Poly V Belts - J, K, L, M
• Poly Flex V Belts: 3M, 5M, 7M, 11M.
• Poly Urethane Timing Belts - T2.5, T5, T10, T20, DT5, DT10, DT20, AT5, AT10, DAT5, DAT10, MXL, XL, L, H, XH, PU Steel Cord or Kevlor Cord Timing Belts, PU 84 Buttons Belts, 166 Teeth Belts.
• Poly Chain GT - 5MGT, 8MGT, 14MGT & CARBON GT3

Mitsuboshi Japan V-Belts & Raw Edges Cogged Belts. A, B, C, D, AX, BX, CX, SPA, SPB, SPC, XPZ, XPA, XPB, XPC, M, Z, 3V, 5V, 8V, 3VX, 5VX, AA, BB, Banded V-Belts.

We always remain concerned about delivering a flawless range of products and thus we store the entire lot under secured environment till the final dispatch of the orders. We have adopted different payment procedures for the attainment of complete client satisfaction. In online payment procedure, the procedure depends on the processor model or gateway; both of them ensure complete security.

Details :

• Manufacturers & Suppliers of "AIB" Brand Special Quality Nylon Sandwitch Flat Belts in Paper & Board mills for all Drives
• “MITSUBOSHI” Japan V-Belts & Raw Edge Cogged V-Belts, A, B, C, D, AX, BX, CX, SPZ, SPA, SPB, SPC, XPZ, XPA, XPB, XPC
• PVC Conveyor Beltsfor Paper Sheet Cutters
• Rubber & PU Timing Belts for Paper Finishing & Sheet Cutters
• Rubber Conveyor Plain & Rough Top Belts for Carrying Coal, Wood Chips, Paper Scrap etc.,

Details :

• The following products using in seed processing industry.
• PVC Conveyor Belts, PVC Conveyor Belts with cleats & side walls for inclined Conveyors.
• Plastic Mesh Conveyor Belts with side plates for dryers.
• Teflon Tapes, Teflon Belts, Endless flat belts & PVC Belts, Rubber coated timing belts for Pouch sealing machines.
• Bucket Elevator Belts V-Belts.
• We are doing PVC, PU Conveyor belts jointing on machines in sites with imported HOT Vulcanizing machines and equipments.

Details :

• Belts for Tobacco Industry - Derco has developed special Polyolefin coated conveyor & process belts for tobacco industries applications. These belts are extremely safe in use as no toxic elements or compounds are created during burning at temperature above 8000C (Pyrolyse).
• PVC, PU Coated Conveyor Belts " Derco Holland" PVC, PU coated conveyor belts are today using in most light duty conveying application. Our product range offers a wide variety of belts types, which facilitate the choice of the right belts for any application.
• Non Food Grade, Food Grade (FDA & USDA approved) PVC/PU conveyor belts fitted with cleats, side walls, profiles, tracking guides etc., to meet the most demanding conveying needs.

NYLON SAND-WITCH BELTS : This is essentially a flat belt with tensile polymide reinforcement, laminated on both sides with friction covers of synthetic rubber, chrome leather, nylon fabric or its combinations. We can also supply Grooved type in synthetic rubber in Endless, Open Skived & Open Rolls.

wrapped v-belts concave sidewalls ensure uniform pulley contact. Arched top provides uniform load distribution on the cords. Flex weave cover increases flexibility z, a, b, c, d, c.

Raw edge cogged. Excellent performance / cost ratio. Suitable for drives requiring smaller pulleys Durable and maintenance free. AX, BX, CX

Raw edge, moulded-notch, narrow section V-belt. Most powerful V-belt available in the market. Increased transmission efficiency saving cost and space. Double Flex-Weave backing protects from wear especially when back side idlers are used. XPZ, XPA, XPB, XPC.

Gates belts Super HC Plus Raw edge, moulded notch, narrow section V-belt. 33% longer life. Dual Printing helps in lowering your inventory cost. Resistant to oil, heat, ozone end sunlight. XPZ, XPA, XPB, XPC.

Gates belts Multi-Speed Variable speed drives. Maximum range of speed changes. Engineered notching increases flexiblility and ensures maximum heat dispersion, considerably decreasing running temperatures. Exceptionally long belt life. Both metric and imperial.

Polyurethane V-belts. Long belt life on small pulleys and compact drives High performance an smooth running for precision applications Greater shaft speeds, in excess of 10000 rpm. 3M, 5M, 7M, 11M and Joint Bands.

The worlds best belt drive system. Out performs roller chain drive. Higher power rating - 4 times HTD Optimal choice for high-torque applications. Extremely quiet and clean, no lubrication required. 5MGT, 8MGT, 14MGT.

Higher loads and positioning accuracy. Higher capacity: twice HTD power rating. Long trouble free service. Smaller, more compact design Runs on HTD Pulleys. 2MGT, 3MGT, 5MGT, 8MGT, 14MGT.

Gates belts Twin Power Double and directly opposite teeth. Transmits 100% load from either side. High tooth jump resistance. Extremely quiet, free from lubrication and maintenance. Available in all synchronous belt types.

Polyurethane belts. Steel or Kevlar Tensile member. Wide range of load capacities and speed ratios. Minimum elongation and longer service life. T2, T5, T10, AT5, AT10, DL-T5, DL-T10.

This is very simple and efficient handy tool for use with all small V-Belt and synchronous drives, including PowerBand and Poly Chain GT belt drives.

Details :

• Wrapped V-Belts
• Concave Sidewalls ensure uniform pulley contact.
• Arched top provides uniform load distribution on the cords.
• Flex Weave cover increases flexibility Z, A, B, C, D, C.

Details :

• Raw edge, moulded-notch, narrow section V-belt.
• Most powerful V-belt available in the market.
• Increased transmission efficiency saving cost and space.
• Double Flex-Weave® backing protects from wear especially when back side idlers are used.
• XPZ, XPA, XPB, XPC

Details :

• Raw edge, moulded notch, narrow section V-belt.
• 33% longer life.
• Dual Printing helps in lowering your inventory cost.
• Resistant to oil, heat, ozone end sunlight.
• XPZ, XPA, XPB, XPC.

Details :

• PowerBand® offers a solution for drives where single belts vibrate, turn over or jump off pulleys.
• PowerBand® available in multiple strands.
• PREDATOR™ - with Aramid fibre tensile cord provides extraordinary strength and durability.
• PowerBand® - SPB, SPC, 8V/25J, 9J, 15J, 3VX, 5VX, A, B, C, D.
• PREDATOR™ - 3VP, 5VP AND 8VP

Details :

• Multi ribbed V-belt
• Extremely smooth, flexible and coll running.
• Woven fabric rib surface ensures wear resistance, quiet running and provides clutching surface
• Smaller drive package.
• J/PJ, L/PL, M/PM

Details :

• Variable speed drives.
• Maximum range of speed changes.
• Engineered notching increases flexiblility and ensures maximum heat dispersion, considerably decreasing running temperatures.
• Exceptionally long belt life.
• Both metric and imperial.

Details :

• Polyurethane V-belts.
• Long belt life on small pulleys and compact drives
• High performance an smooth running for precision applications.
• Greater shaft speeds, in excess of 10000 rpm.
• 3M, 5M, 7M, 11M and Joint Bands.

Details :

• The worlds best belt drive system.
• Out performs roller chain drive.
• Higher power rating - 4 times HTD
• Optimal choice for high-torque applications.
• Extremely quiet and clean, no lubrication required.
• 5MGT, 8MGT, 14MGT.

Details :

• Higher loads and positioning accuracy.
• Higher capacity - twice HTD power rating.
• Long trouble free service.
• Smaller, more compact design
• Runs on HTD Pulleys.
• 2MGT, 3MGT, 5MGT, 8MGT, 14MGT.

Details :

• Precision drives.
• Reduced noise levels.
• 50% more power than HTD.
• Improved tooth jump resistance & positioning accuracy.
• 2MR, 3MR, 5MR, 8MR, 14MR.

Details :

• High Torque Drives.
• 25% improved tooth jump resistance.
• Wide range of load capacitires and speed ratios.
• High mechanical efficiency with minimised heat buildup.
• 3M, 5M, 8M, 14M, 20M.

Details :

• Conventional drives.
• Positive slip proof engagement.
• Fibre glass tensile cord to provide strength and to eliminate elongation.
• Economical and maintenance free operation.
• MXL, XL, L, H, XH, XXH.

Details :

• Double and directly opposite teeth.
• Transmits 100% load from either side.
• High tooth jump resistance.
• Extremely quiet, free from lubrication and maintenance.
• Available in all synchronous belt types.

Details :

• Polyurethane belts.
• Steel or Kevlar Tensile member.
• Wide range of load capacities and speed ratios.
• Minimum elongation and longer service life.
• T2, T5, T10, AT5, AT10, DL-T5, DL-T10.

Details :

• Linear movements and reversal drives.
• Fibreglass or steel cord for rubber constructions. Steel cord for polyurethane belts and aramid cord for PolyChain® GT®2 belts.
• High positioning accuracy, suitable for applications with repetitive movements.
• Available in all types