Aic is one of the leading manufacturers and suppliers of high quality and competitively priced, state of the art technology gas and water analysis systems. We bring to you the best and latest in analysis systems, collaborating with fuji electric japan, ic controls canada & bieler + lang germany. Simple works the best is fully exemplified by popularity of fuji zrjzre microflow sensor based ndir analysers. We are an nsic registered iso 9001 accredited unit manufacturing gas analyser systems in technical collaboration with fuji, electric japan. The analyser sample handling systems are designed based on more than three decades of experience in the manufacture of analyser systems and our experience of installations in diverse areas.we keep the design of the system as simple as possible at the same time ensuring that the pre-conditioning of the sample to remove dust and moisture is adequately taken care of. This ensures easy and reliable operation and maintenance of our analysis systems. Aic has more than 500 analyser installations in last 12 years of operation with more than 300 fuji analyser installations in last 6 years in cement, steel, power, fertiliser and petrochemical companies. our co analyser systems were exported last year to kazakhastan for a cement process application and previously to countries like korea, congo, nigeria through indian companies for incinerator, chemicals and steel process applications.

Analyzing air pollution is the first step towards preserving a clean atmospheric environment. Fuji developed the first infrared gas analyzer in japan to use mass-flow sensors. Since then, we have supplied customers with various types of gas analyzers to support environmental preservation and control efforts. These efforts include measurements of atmospheric pollution and detection of low density of sox and nox, generated by incinerating facilities and boilers. Fuji's gas analyzers are commonly used to monitor the atmosphere to help maintain a cleaner natural environment.

OPAL 100 Series transmissometer systems are non-compliance monitoring systems that can provide continuous insitu measurement of both visible (opacity %) and quantitative (mgm3) emissions. They are ideal for use as opacity monitors in package boiler, incinerator, and combustion process applications where EPA emission limits are applicable and precise combustion control is desired. They are also an invaluable tool for measurement of quantitative emissions, especially in applications where other technologies have limitations from electrostatic precipitators, variable air velocities andor large duct spans.

OPAL 200 series dual channel opacity and dust monitoring systems are designed, tested and certified to the USEPA Performance Specification #1 (opacity) and are also compliant for use in USEPA PS-11 (quantitative dust) monitoring applications. They can be supplied as either standard application systems or EXp certified systems for use in hazardous areas. 200 Series system outputs and control features are extremely versatile and offer many unique features not available in competitor systems. This allows the OPAL 200 to be the ideal replacement system in the event of urgent site breakdowns.

We have partnered with FUJI ELECTRIC SYSTEMS, one of the leading manufacturers and suppliers of Gas and Water Analysis systems to bring you the best in terms of Flow Metering Systems. Please follow the links below to browse through the wide range of Flow meters that we offer in harmony with FUJI SYSTEMS. Non-intrusive flow measurement from the outside of piping. Our ultrasonic flowmeters can be easily mounted even on previously existed piping and measure flow rate without contact to liquid directly. The series employ unique measurement systems that minimize the elect of bubbles in the fluid and feature wide measurement ranges. Duosonics is a new concept ultrasonic flowmeter utilizing pulse Doppler method and transit time method as the worldwide first. Both portable and fixed mount types are available.

Bieler + Lang Bieler + Lang gas monitoring and warning systems - your reliable partner for security and safety systems. In many sectors there is a danger of hazardous or explosive gases or vapours escaping into the atmosphere. Over 30 years of experience in this field enable us to provide optimum protection for people, the environment, technical equipment and facilities from damage, with all its consequences, by speedily and reliably raising the alarm, before a major gas leak or explosion has a chance to occur. Bieler + Lang gas monitoring and warning systems have been specially developed for these applications. Many well-known companies rely on the quality of our products.Bieler + Lang products are constantly being improved by our development engineers and they are produced and calibrated in our own factory to the highest standards. Our equipment is characterised by its ease of operation and its robust reliability. Irrespective of whether a small or large system is required, our sales staff will assess your requirements on site and advise you on the regulations relevant to your application. Our specialist staff will then work out a security concept tailored to your needs, so that the system can be manufactured in our production facilities. But that's not the end of our service. Naturally our service technicians will install your new security system and get it running. And our comprehensive service network will continue to support you from then on, because only a regularly maintained system will continue to function to your complete satisfaction for many years.

Air quality monitoring involves the measurement of pollution in ambient conditions. Monitoring the air quality is important in protecting the health of populations and is performed by Ambient Air Quality Monitoring Stations (AAQMS) that are totally integrated with gas analyzers, particulate monitors, calibration equipment, data loggers and data reporting software. Ecotech provide a totally integrated air quality monitoring system or network of systems for all its world wide clients.

StateoftheArt microprocessor based and easy to use. Users say It just seems to do what you expect. Automatically recognizes pH buffers for easy accurate calibration and identifies pH Electrode Status. Two unique 420 mA outputs, independently programmable zero, span anddirection, for acid and caustic feed (or pH and Temperature). Similarly, two programmable alarms and diagnostics are included. Optional PID control functions, even TWO pH electrode inputs are available on the Model 656! Housed in a moisture and corrosion resistant case. Reliable loop powered 2wire 4 to 20 mA pH transmitters are also available in similar or explosionproof housings.

Large industrial design with built-in ruggedness and long life needed by industry. Heavy duty body protects cushion mounted electrodes for impact resistance, with sealed encapsulated leads to keep moisture out. Protected pH glass tip, large reference junctions surface to resist pluggingand contamination-resistant reference construction ensures accuracy and long electrode life in tough applications such as effluent streams, pulp stock, mining slurries, high temperature or strong chemicals.

Conductivity Analysershave all of the microprocessor benefits of the pHORP analysers listed above. Along with the two 420 mA programmable outputs, full alarm and diagnostic capabilities is an autoranging scale from 1 to 200, 000 microseimenscm and simple Auto calibration that recognizes yourstandards. Direct reading % NAOH, % H2SO4, %HCl, % NaCl, TDS, Resistivity, and PID control options are available. The 2wire versions are reliable, accessible loop powered transmitters.

Conductivity SensorsTo service a wide range of applications from high purity water to high conductivity, to high temperature, to condensate, to chemical waste. There is an impressive range of sensor styles, cell constants and sensor construction materialsfor virtually all applications. Configurations areavailable on insertion, twistlock, or submersible.

Part Per Billion Dissolved Oxygen Systemsare designed to give fast response and ease of use. Measures trace Dissolved Oxygen to sub ppb level within 0.1 ppb Galvanic technology provides accurate, scientific zero. Display shows barometric pressure, current output and program messages. Two assignable 420 mA outputsand two assignable relays. Quick onebutton calibration with pretensioned membrane for easy annual replacement. Panel mounted with stainless steel flowcell, double shielded sensor cable, online calibration, magnetitegrit bypass and siphondrain system for enhanced accuracy at low ppm levels.

Galvanic Drinking Water Chlorine Systemsare designed and manufactured to give you fast response, reliability and ease of use. All system are mounted on a sample panel which includes chlorine sensor, flow cell, pressurereducing valve, flow setting valve, atmospheric break, constant head, grab sample point & atmosphericdrain. IC Controls unique galvanic sensor technology provides better accuracy because of the absolute zero, excellent stability and directs measurement of HOC!. Galvanic technology has also eliminated the need forreagents which reduced maintenance time and cost. The total package is designed to save money and time while improving the reliability of the online measurement.

Portable Part Per Billion Dissolved Oxygen Systemsare designed to give you fast response, flexibility, reliability and ease of use in a portable analyser. Automatic ranging reads directly in part per billion without any need for set up : from 0 ppb to 20 ppm dissolved oxygen with values available onan RS232 output. Quality construction includes a stainless steel portable panel doubleshielded ppb dissolve oxygen sensor and bulkhead quickdisconnects to produce stable low ppb reading when the sample is delivered via stainless steel tubing. By, design, the cell chemistry regenerates and does not deplete the electrolyte, which produces long, stable runs between electrode recharge. When recharge is necessary, the membrane replacement is an easy factory pretensioned module.