Other Products / Services #2371223

We offer Horizontal Deep Freezer .Also used for preservation of red blood plasma, white blood cell, skin, bone, bacteria, semen, biomedical product in small medium and large blood centres.Suitable for hospitals, drugstore, pharmaceuticals factories, sanitation and anti-epidemic stations and clinics.SALIENT FEATURES & CONSTRUCTIONRobust construction Outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.Inner chamber made of STAINLESS STEEL SHEET (304 Grade).Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.Door operated illumination lamp is fitted inside the chamber for easy visibility.A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.Direct cooling system for stable temperature control by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant.Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.Caster wheel mounted for easy portability.Supplied with cord and plug.Operating Voltage: 220 Volts AC (50 Hz).

We offer Freezer Dryer.Housed in a super structure steel frame it is mounted on swivel casters.Complete with Perspex see through lid, gasket and control instruments i.e. Microprocessor Based Digital Temperature Controller for measurement of Temp. & Electronic digital Vacuum Indicator. The unit made out of hermetically sealed compressor and can be optionally fitted with 100 litters min direct motor drive rotary vane type vacuum pump of double stage with Air ballast having ultimate vacuum of 1x10-3 torr on pump head.High grade PUF INSULATED between outer and inner chamber for minimal thermal losses.Condenser Trap: All non-magnetic stainless steel fabricated, argon welded, dished-bottom for complete effluent removal. Refrigeration coils made of copper bonded to outside of condenser heavily insulated. Temp. up to (-)400 C at ambient temperature of 200 C is maintained through a MICROPROCESSOR BASED DIGITAL TEMPERATURE INDICATOR - CUM - CONTROLLER.Vacuum Drum has 6 or 12 port manifold (Main drying chamber) made of stainless steel non-magnetic grade with Perspex top cover. (CFC FREE AND PUFF INSULATED).

We offer Blood Bank.Robust construction Outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.Fitted with Durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.Door operated illumination lamp is fitted inside the chamber for easy visibility.A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant.Temperature is controlled by Electronic Digital Temperature Indicator Cum Controller fitted With Audio Visual Alarm incorporated with battery back which triggers in the event of fluctuation exceeding permitted tolerance. Unit is also fitted with Door Operated Alarm and Power Supply Failure Alarm, as a safety device. to prevent the spoilage of stored blood bags.Drawers are provided for accommodating blood bottles or Blood bags.Caster wheel mounted for easy portability.Supplied with cord and plug.Operating Voltage: 220 Volts AC (50 Hz).

We offer Incubator .Specially designed for incubation of Biochemical Oxygen demand on water and sewage; can be used as environmental study and growth chamber by incorporating lighting and humidification system.Used in various applications for microbiology, cell cultivation of animals, plants & food studies- where experiments requiring low temperature conditions. Used for microorganism or activation, good storage and desalting process of enzyme extracts and for preservation of vaccines, insulin, level extracts, a* 15C for serological and complement fixation tests for enzymatic digestion process.SALIENT FEATURES & CONSTRUCTIONRobust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish.Inner chamber made of STAINLESS STEEL SHEET (304 Grade).Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber.Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement.Door operated illumination lamp is fitted inside the chamber for easy visibility.A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature.High grade PUF INSULATION between outer and inner chamber for minimal thermal losses.Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked CompressorCondensing Units CFC free & R-134 a eco friendly refrigerant.Heating elements are placed in the path of moving air duly insulated from the body.Inner chamber has ribs for placing the shelves at convenient levels. Supplied with 2 or 3 removable shelves.

We offer Fermenter Vessel.APPLICATIONSFermenter Vessel made of stainless steel is ideal for doing fermentation in large volume.Fermenter Vessel is low cost options for general Fermentation- ideal for R&D labs etc, Agriculture, Pharmaceutical, and Food & Beverage Industries.SALIENT FEATURES & CONSTRUCTIONComplete Assembly constructed from S. S. 304 Grade.Heated through steam heating system by immersion type (ISI Marked) Heating Element.Fitted with pressure gaugeFitted with Pressure release valve disable at 17 psi pressure.Provided with Inlet & Outlet for cold water.Having opening lid on the top of vessel for easy cleaning.Provided with in line filter for sterile in coming & out going air.Inoculation pot & sampling pots are fitted with one pot fitted with Temperature Gauge.Whole assembly is covered with steam jacket.Steam jacket if fitted with safety valve.Operating Voltage: 220 Volts AC (50 Hz)

We offer Medical Waste Sterilizer.1. for gravity flow autoclaveThe temperature of not less than 121C and pressure of not less than 1.02 K.G.CM2 and autoclave residence time not less than 60 minutes.The temperature of not less 135C and pressure of not less than 2.1 K.G.CM2 and autoclave residence time not less than 45 minute.The temperature of not less than 149C and pressure of not less than 3.5 K.G.CM2 and autoclave residence time not less than 30 minute.2. for vacuum autoclaving with pre vac & purge system.The temperature of not less than 121C and pressure of not less than 1.02 K.G.CM2 and autoclave residence time not less than 45 minutes with one or more pre vacuum pulse.The temperature of not less than 135C and pressure of not less than 2.1 K.G.CM2 and autoclave residence time not less than 30 minutes with one or more pre vacuum pulse.Construction:Shape: Either cylindricalrectangular. Chamber is made of boiler grade sheetAISI 304AISI 316 thick sheet having one or two nos. pivoted door mounted on a sturdy structural stand dully insulated & covered either by S.S. or M.S. Sheet. Pit mounted design is also available as per the customer requirement for easy loading & unloading. The door will be provided with automatic safety door looking unlocking mechanism. Valves are provided for operation safety steam inlet, drainage etc.Control and Monitoring System: Microprocessor based computer system and printer is provided for controlling and monitoring the sterilizing cycle with the following featureFully programmable microprocessor based unit with no volatile memory and with different program combinations.Automatic operation of the sterilizer.Self diagnostic system gives fault massage to the operator.

We offer Tissue Culture Rack.APPLICATIONS"REW" Tissue culture racks are very useful for various types of tissue culture plants and other tissue culture work in tissue culture room.Used in areas of tissue culturing of plants as well as in other tissue culture work.It is Ideal for Agricultural Research Labs.SALIENT FEATURES & CONSTRUCTIONLow Cost.Minimum heating effectheat dissipation.No Flickering effect.Tissue Culture Racks are made of tubular mild steel pipes flawlessly constructed duly paintedpowder coated for longer life so as to provide the structure due protection from issues like corrosion for durability.Each rack of size 48"x12" (depth) is covered with thick unbreakable plexi glasshylem sheet.Distance between shelves to shelves is 16".Platform surface is of 3mm thick hylem Sheet.Four 40-watt fluorescent light (With Electronic Ballast).4x25 Watt incandescent lamps in each shelf with switching arrangement.UV Germicidal Light are fitted inside the rack work area.All fluorescent tubes chocks and ultra violet germicidal tube chocks are fitted outside of rack. If desired to avoid heat dissipation inside the rack.Fitted with 0-24 Hours Digital Timers.All control panels are fitted on the sides of tissue culture racks comprising of OnOff switch of fluorescent tubes and UV tubes & Timers.The whole rack is provided with four nos. castor wheels at the bottom for easy mobility to any place.

We offer Mortuary Chamber.Robust construction Corrosion free exterior is powder coatedpainted for lasting finish & interior chamber is made of Stainless Steel (304 grade).]The outer panels of all our mortuary chambers are made of galvanized sheets having a superior bacteria resistance film coating for greater hygiene (Optional).The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade or G.I. (as per the customer's requirements). Thus making it easier to clean and ensure greater stability and life.Fitted with durable coaxial blower for forced air circulation to maintain temperature uniformity in the chamber.Outer front double walled door is insulated and are connected by very sturdy chrome plate hinges and fitted with hard chrome plated lubricated latches for opening the door and are fitted with high quality neoprene rubber gaskets for air tight fittingsThe floor of mortuary chambers is constructed out of hardened and reinforced steel sheets for easy cleaning and hygiene.Door operated illumination lamp is fitted inside the chamber for easy visibility.Supplied with adjustable trays used for storing cadaverous placed on rollers.High grade PUF INSULA TION between outer and inner chamber for minimal thermal losses. Designed for long storage of cadaverous.Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked CompressorCondensing Units CFC free & R-134 an eco friendly refrigerant.Control panel having all controls and circuitry are housed at the top fitted with T temperature controller cum Indicator fitted with audio visual alarm for high & low temperature with LED display to select any desired temperature provided with Volt meter on the panel to read the incoming voltage.Caster wheel mounted for easy portability.Supplied with cord and plug.Operating Voltage: 220 Volts AC (50 Hz).