Our Products
This fully hydraulic lift with its different capacity, can handle all types of vehicles. These hydraulic lifts are operated with oil pressurized by compressed air. The plungers are made of high grade steel, ground to a close tolerance and hard chrome plated for high wear resistance and good surface finish. The gland rings used in the plunger are of a special design. The wiper rings prevents the entry of water and dirt particles into the hoist cylinder while raising, servicing and lowering.
These lifts are available in 4, 6, 8 tones in single post and 8, 12, 16, 20, 24 tones in double posts respectively
|
MODEL | CAPACITY TONNES |
NO.PISTON | PISTON DIA MM |
LIFTING HEIGHT MM |
OIL REQD. LITRES |
AIR PRESSURE KG/CM2 |
SIZE OF SUPER STRUCTURE, MM |
BEAM SIZE MM |
RHL-4 | 4 | ONE | 270 | 1500 | 160 | 9 to 12 | 4270X700 | 175X85 |
RHL-6 | 6 | ONE | 320 | 1500 | 205 | 9 to 12 | 4880X740 | 200X100 |
RHL-8S | 8 | ONE | 320 | 1500 | 250 | 9 to 12 | 4880X740 | 200X100 |
RHL 8 | 8 | TWO(4+4) | 270 | 1500 | 320 | 10 to 12 | 4880X700 | 200X100 |
RHL 10 | 10 | ONE | 353 | 1500 | 275 | 10 to 2 | 4880X776 | 250X125 |
RHL 12 | 12 | TWO(6+6) | 320 | 1500 | 410 | 10 to 12 | 5500X910 | 250X125 |
RHL 16 | 16 | TWO(8+8) | 322 | 1500 | 410 | 12 to 16 | 5500X910 | 250X125 |
RHL 20 | 20 | TWO(10+10) | 353 | 1500 | 550 | 12 to 16 | 5500X960 | 300X140 |
ST series are single stage, two cylinder Air Compressor from the range of 1 HP to 10 HP |
Reciprocating air cooled, Oil splash lubrication, Belt driven type Air Compressor |
Sand Blasted Casting Components with leak free design |
|
Application
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
These are single stage twin cylinder compressors from the range of 1 HP to 10 HP |
The Compressors are splash lubricated air cooled and reciprocating. |
The inter cooler is connected to the discharge sides of the two cylinder heads. |
The connecting rod of crankshaft assembly is precision machined and dynamically balanced |
|
COMPRESSOR | FREE AIR DELIVERY |
MOTOR | TANK CAPACITY | |||||
Model | No. of Stage |
No. of Cylinder |
RPM | Working Pr. Kg/Cm2 |
HP | Ltrs | ||
OFS 100 | 1 | 1 | 1155 | 7 | 4 | 113 | 1 | 90 |
OFS 150 | 1 | 1 | 850 | 9 | 5.3 | 150 | 1.5 | 110 |
OFM 100 | 1 | 1 | 1375 | 7 | 3.2 | 90 | 1 | 70 |
OFM 150 | 1 | 1 | 1375 | 9 | 3.5 | 98 | 1.5 | 90 |