Asbestos Tape / Belt / Asbestos Webbing Tape Are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater.
Available in Metallic and Non-Metallic.

Pure Carbon an Interbraid multiservice carbon filament packing for pumps and valves. It is a special packing with low friction characteristics adapted easily and quickly into the equipment and requires only occasional gland adjustments.

Application :
Its heat sinking ability makes this packing an ideal seal in high speed rotary equipment, sealing against boiler feed water, steam, oils, aromatic aliphatic solvents, acids and alkalis except fluorine, oleum, fuming nitric acid and aqua regia.

PTFE Teflon yarn coated with graphite and lubricated with an inert high temperature lubricant.

Hollow Core Gland Packing are specifically designed to reduce packing wear and shaft / sleeve wear in slow rotating equipments with excessive shaft run out. Hollow Core Packing resists gland follower load and excessive run-out or whip in shaft.

Gland adjustments and repacking are greatly reduces. Months of in-plant testing have proved that reinforced yarn packing with square hollow core will outlast conventional packing in application associated with excessive shaft deflection on large shaft.

Hollow Core Packings are offered as per the suitability of the application and service.

asbestos centre manufactures asbestos yarns in a wide range of constructions with a wide range of properties dependent on the various applications intended. However, they are commercially distinguished under the following groups:
a)non-metallic
b)metallic-incorporating metal wire
c)union-in combination with cotton threads

Very flexible and supple packing, excellent alternative to pre-formed graphite-rings. The benefits of this packing are low friction and excellent thermal conductivity. It can be used with steam, water, oils, alkalis, acids, solvents, paints, varnishes on pumps and valves in high temperature and high pressure environments prevailing in power plants, boiler houses, refineries, steel mills, petrochemical industries, etc.

Ceramic Fiber Cloth contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Ceramic Cloth is a woven fabric made from our high quality alumina silica fiber and especially mechanically needled for increased tensile strength and surface integrity in form of ceramic fiber yarn. It can be used for high temperature applications up to 2300 F. The cloth is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

we offer asbestos millboard that is fabricated from selected clean, long asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These millboards are known for its features such as heat and fire resistance and strength. Our millboards are perfect at temperatures up to 500c (932" f) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400 c. These are also known for its features such as withstanding vibratory and impact loads easily.

available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.

Backed by a team of diligent experts, we offer high quality Asbestos Hood.It is a type of cloth to form pliable mineral textile with high tensile strength and high resistance to heat, flame, chemicals, and weather.

We manufacture Asbestos Brake Lining, which is a solid woven, flexible, asbestos based friction material. These are made from Asbestos yarn twisted around brass wire make Brake Lining very durable. We avail them in roll form and segments, cones and special shapes can easily be cut from it. Our range of Brake Liner is flexible material and is possible to form it to radius. Our Brake Lining has a medium / high co-efficient of friction combined with moderate temperature wear resistance. Our high quality products are made using good quality raw materials, which enhance quality and empower strength. We offer Industrial Roll Lining with both surfaces ungrounded. These products are applied in variety of brake and clutch components, industrial band and drum brake linings, industrial band, and plate and cone clutch linings.

Industrial band and drum brake Linings :
Industrial band, plate and cone clutch linings
(eg. cranes, lifts, excavators .winches, concrete mixers, drop hammers, mine widening appliances, underground, haulages, tippers, oil well draw works, road rollers, sugar mill centrifuges).

Certain heavy road transport vehicles and tractors.

Data based on standard test methods
Specific gravity: 1.6
Ult. tensile strength: 246 kg/cm2
Ult. compressive strength: 630 kg/cm2
Rivet holding capacity: 900 kg/cm2

We are engaged in offering a wide array of Asbestos Aprons, which is manufactured as per highest quality standards, using high grade material such as spinning fiber of asbestos. Owing to their excellent strength & quality, these Aprons are used in a number of industries, such as textile machine, boilers, pipe lines, power stations, thermal insulation.

Asbestos Tape / Belt / Asbestos Webbing Tape Are used for wrapping of exhaust pipes, hot and cold insulation, electric cables, living switch boxes, drying oven, conveying hot articles in glass Industries, oil lamps and heater.
Available in Metallic and Non-Metallic.

Pure Carbon an Interbraid multiservice carbon filament packing for pumps and valves. It is a special packing with low friction characteristics adapted easily and quickly into the equipment and requires only occasional gland adjustments.

Application :
Its heat sinking ability makes this packing an ideal seal in high speed rotary equipment, sealing against boiler feed water, steam, oils, aromatic aliphatic solvents, acids and alkalis except fluorine, oleum, fuming nitric acid and aqua regia.

PTFE Teflon yarn coated with graphite and lubricated with an inert high temperature lubricant.

Hollow Core Gland Packing are specifically designed to reduce packing wear and shaft / sleeve wear in slow rotating equipments with excessive shaft run out. Hollow Core Packing resists gland follower load and excessive run-out or whip in shaft.

Gland adjustments and repacking are greatly reduces. Months of in-plant testing have proved that reinforced yarn packing with square hollow core will outlast conventional packing in application associated with excessive shaft deflection on large shaft.

Hollow Core Packings are offered as per the suitability of the application and service.

asbestos centre manufactures asbestos yarns in a wide range of constructions with a wide range of properties dependent on the various applications intended. However, they are commercially distinguished under the following groups:
a)non-metallic
b)metallic-incorporating metal wire
c)union-in combination with cotton threads

Very flexible and supple packing, excellent alternative to pre-formed graphite-rings. The benefits of this packing are low friction and excellent thermal conductivity. It can be used with steam, water, oils, alkalis, acids, solvents, paints, varnishes on pumps and valves in high temperature and high pressure environments prevailing in power plants, boiler houses, refineries, steel mills, petrochemical industries, etc.

Ceramic Fiber Cloth contains a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property. Ceramic Cloth is a woven fabric made from our high quality alumina silica fiber and especially mechanically needled for increased tensile strength and surface integrity in form of ceramic fiber yarn. It can be used for high temperature applications up to 2300 F. The cloth is reinforced with fiberglass filament, and optional Inconel/alloy steel wire. Ceramic fiber textiles (cloth, tape and rope) contain a certain amount of binder material which is normally burned at lower temperature and does not affect the insulation property.

we offer asbestos millboard that is fabricated from selected clean, long asbestos fibres of uniform quality assorted with suitable incombustible binding materials. These millboards are known for its features such as heat and fire resistance and strength. Our millboards are perfect at temperatures up to 500c (932" f) and even higher temperature when properly supported. Additionally, it can be used acceptably at extreme temperature up to approximately 1400 c. These are also known for its features such as withstanding vibratory and impact loads easily.

available is soft, medium and hard grades, these sheets can be cut, drilled and screwed to supporting beams, and can be moulded or cemented to any shape. The medium grade is supplied only if it is specially asked by our clients. The hard grade is stiff and brittle and is used where rigidity is needed.

Backed by a team of diligent experts, we offer high quality Asbestos Hood.It is a type of cloth to form pliable mineral textile with high tensile strength and high resistance to heat, flame, chemicals, and weather.

We manufacture Asbestos Brake Lining, which is a solid woven, flexible, asbestos based friction material. These are made from Asbestos yarn twisted around brass wire make Brake Lining very durable. We avail them in roll form and segments, cones and special shapes can easily be cut from it. Our range of Brake Liner is flexible material and is possible to form it to radius. Our Brake Lining has a medium / high co-efficient of friction combined with moderate temperature wear resistance. Our high quality products are made using good quality raw materials, which enhance quality and empower strength. We offer Industrial Roll Lining with both surfaces ungrounded. These products are applied in variety of brake and clutch components, industrial band and drum brake linings, industrial band, and plate and cone clutch linings.

Industrial band and drum brake Linings :
Industrial band, plate and cone clutch linings
(eg. cranes, lifts, excavators .winches, concrete mixers, drop hammers, mine widening appliances, underground, haulages, tippers, oil well draw works, road rollers, sugar mill centrifuges).

Certain heavy road transport vehicles and tractors.

Data based on standard test methods
Specific gravity: 1.6
Ult. tensile strength: 246 kg/cm2
Ult. compressive strength: 630 kg/cm2
Rivet holding capacity: 900 kg/cm2

We are engaged in offering a wide array of Asbestos Aprons, which is manufactured as per highest quality standards, using high grade material such as spinning fiber of asbestos. Owing to their excellent strength & quality, these Aprons are used in a number of industries, such as textile machine, boilers, pipe lines, power stations, thermal insulation.