Industrial Valves #134536

Disc valves It is manufactured under API 594 and provided with cost-effective range. It is available with sealing like metal to metal with lining material like PTFE and rubber.

Wafer check valves are specially designed to minimize pressure drop. Due to its simple and compact design, it requires minimum installing space. It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

FLOEC Duplex Steel Non Return Valves are applied in different chemical industries to combine different gases into single gas stream. These valves offer trouble-free installation while requiring least maintenance. They are manufactured very sturdily and hence have a very good life span.

Lug Type Butterfly Valves are of different types according to technique of sealing the perimeter of the disc in its completely closed arrangement. Our valves offer very durable as well as flawless performance. Our valves are used in an extensive array of applications in the industries of petroleum, packed water, food products, chemicals, fertilizers, paint etc. They are anti-corrosive and resistant in abrasion in nature. The body seat of this valve is designed to offer very low torque, and a tight shut off with absolutely no leakage.

pp non return valve highly reliable range of the valves. We offer broad spectrum of size and configuration to suite the huge industrial as well as domestic usage of the valves.

Industrial check valves Depending upon the applications, material of construction is varying. We provide valves fabricated from cast iron, cast steel, alloy steel, stainless steel and as per requirements.

Forged check valve is available with different bonnet options like fully welded bonnet, bolted bonnet and fully welded bonnet. Spiral gasket is provided for the sealing of the bonnets.

Disc check valve It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

Wafer swing check valve its simple and compact design, it requires minimum installing space. It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

PVC check valves are preferred for its vibration free application. Stabilization of disc helps the disc against fluttering. Being pressure sensitive,

Pressure check valve It helps to discharge medium to maintain the system pressure. According to the application, we offer various options of size, shape, material of construction, and configuration to perfectly match the requirement.

Plastic check valve at high temperature and pressure along with smooth and tight sealing. It is ideally used for vacuum and pneumatic applications.

Cast steel check valve of size and configuration to suite the huge industrial as well as domestic usage of the valves. Depending upon the applications, material of construction is varying.

Dual check valve It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

Pneumatic check valve it requires minimum installing space. It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration.

We fabricate these valves with high dimensional accuracy. They are resistant to abrasion as well as very high temperature. These valves are easy to install and maintain. They are precisely fabricated as per the industrial standards BS 5155API 609. We strictly quality check these valves under various parameters to ensure they are flaw-less, before supplying them to our valued customers.

FLOEC are very lighter and offer a reliable sealing under different ranges of pressure. They are bi-directional are mainly used in isolating or regulating of flow of fluids. They are precisely engineered to offer an excellent performance for long durations. Our valves are high in quality as they are manufactured maintaining the quality at every stage of production and also the finished goods are tested under different parameters. Thus their flawlessness is guaranteed.

Our FLOEC High Pressure Gate Valves is well-designed for regulating bidirectional flow and are apt for uninterrupted flow control. They function excellently in a trouble-free manner and provide an extremely tight shutoff. They are absolutely safe and long-lasting even under high pressure and vacuum. They are manufactured as per the industrial norms of API-600. They are very lucrative and

Our FLOEC alloy steel valves are chiefly applied in a variety of applications in industries such as chemical, petrochemical, paper, sugar & textile manufacturing units etc.These precision are extensively used in the various Forged steel valves are very well acknowledged by our valued clients for its good performance and consistency.

Alloy steel Butterfly Valves under the brand name of FLOEC. They are applied to control or regulate the flow of fluids in a pipe line. They are made according to the BS 5155API 609 standards.A main seal is offered at the top surface of its body to prevent any dust or unwanted speck getting into the Valve, and so the Stem has a good endurance and operates remarkably.

The FLOEC Alloy-20 Ball Valves have excellent characteristics such resilient finishing, least maintenance as well as durability. They offer excellent performance and need have anti-corrosive and rust proof features.

Our Alloy-20 Gate Valves offer excellent performance as they are precisely engineered according to the Industrial norms of API 602. We offer high finishing to this valve. They have high tensile strength and a hard faced trim material to ensure tight as well as long-lasting Sealing. They are mainly used in the Pipeline of diverse fluids, oil & gas fields, power generating stations etc. They are resistant to corrosion as well as rusting. We offer them at very reasonable rates.

Our FLOEC Alloy-20 Globe Valves have been made utilizing the best technology in the market, to guarantee accurate and superior finishing. Since they are made from the alloy of nickel, chromium and molybdenum they are very tough, have anti-corrosive properties and exhibit a good tensile strength.

The chief role of this valve is to regulate and control the water pressure in the pipes as well as avert the back flow of water toward the main supply. We custom make these Alloy-20 Non-Return Valves as per the requirements of our clients.

Our FLOEC Non Return Valves are high quality raw material according to the standards of BS1868. These reasonably priced valves offer trouble-free operations and are mainly applied to regulate the flow of the fluids. They are compact and need minimal maintenance.

Our Cryogenic valve castings are typically made of modifies ASTM CF8M austenitic stainless steel which contains a higher percent nickel to minimize transformation of an austenitic structure to a martensitic structure.

The opening or closing of control valves is usually done automatically by electrical, hydraulic or pneumatic actuators. Positioners are used to control the opening or closing of the actuator based on electric, or pneumatic signals. These control signals, traditionally based on 3-15psi (0.2-1.0bar), more common now are 4-20mA signals for industry, 0-10V for HVAC systems, and the introduction of Smart systems, HART, Fieldbus Foundation, and Profibus being the more common protocols.

High pressure globe valve is very compact and is well-designed for high-pressure throttling. They are used in pressure as well as flow control functions in harsh conditions such as oil and gas industries, power plants, boiler units etc. They are manufactured with high quality material in a qualitative manner and hence are very sturdy and hard-wearing.

Plate valves It helps to discharge medium to maintain the system pressure. According to the application, we offer various options of size, shape, material of construction, and configuration to perfectly match the requirement.

Dual Plate Check Valves are fabricated with the dual plates that have rubber or metal seat so as to offer the ability to manage different kinds of fluids. These valves are corrosion-resistant and have a very good resilience. They can be installed rapidly & easily. Also, they have excellent resistance from abrasion. They are designed and produced as per API 594.

Spring check valve It is available with standard as well as customized configuration. The size ranges from 50 NB to 900 NB. Range also includes pressure rating from 150 # to 600 #.

Rubber check valves It is available with standard as well as customized configuration. The size ranges from 50 NB to 900 NB. Range also includes pressure rating from 150 # to 600 #.

Alloy-20 Ball Valves have excellent characteristics such resilient finishing, least maintenance as well as durability. They offer excellent performance and need have anti-corrosive and rust proof features. They are functional in controlling the flow of fluids in automobile, petro-chemical, fertilizer, pharmaceutical industries. We offer them at a very reasonable price.

Single plate check valve are used in the industries like chemical, petrochemical, water and power plants. They are preferably used for high pressure and high temperature. They are available in small compact size to large size.

Cryogenic valve castings are typically made of modifies ASTM CF8M austenitic stainless steel which contains a higher percent nickel to minimize transformation of an austenitic structure to a martensitic structure. This unsdesirable transformation occurs when valve parts are machined during production process, which make them vulnerable to distortion, when valve assemblies are exposed to extremely low temperature in the field.

Forged valve it strengthen. Forged steel are believed highly durable for different industrial applications. Commonly it is used to prevent various systems and equipments from damage. It is used for the higher pressure applications. It is provided with inlet and outlet connections. Generally it is installed horizontally. To activate valve, no outer energy required.

Dual plate check valve The dual plate check valves are the ideal protection for the pump and drive motors. It helps to discharge medium to maintain the system pressure. According to the application, we offer various options of size, shape, material of construction, and configuration to perfectly match the requirement.

In order to provide suitable and perfect match for different industrial application, we offer non return valves fabricated as per BS 1868. As its name shows, non return valves are used to prevent back flow of the fluid or gas. It is used most for the immediate sealing for the systems supposed to be shut-down unexpectedly.

Dual disc check valve are specially designed to minimize pressure drop. Due to its simple and compact design, it requires minimum installing space. It can be installed vertically or horizontally. We offer alternate materials for different applications. It is available with standard as well as customized configuration

Disc is located on the seat that swings on a hinge. It contains bolted bonnet body. Large check valves are normally swing check valves. It is also available with compact model.

The dual plate check valves are the ideal protection for the pump and drive motors. It helps to discharge medium to maintain the system pressure. According to the application, we offer various options of size, shape, material of construction, and configuration to perfectly match the requirement.

Knife Gate Valves are exclusively designed and manufactured as per MSS SP-81 to tackle the tough working conditions in Pulp & Paper, Mining & Steel, Power and Chemical Industries to deal with Semi-Solids, Fly Ash, Chips, Iron Ore, Tea and Coffee powders, Food Products like chips and mixtures, Sugar and Sugarcane Juice, Fiber content Pulps and similar media. The Knife Gate Valves are offered in an extensive range of Material where as its Knife edged Plate is made of from Stainless Steel Plates of different grades irrespective of the Body material, Hard Faced Plates to suit the application. During shutting operation of the Knife Gate Valve the Knife edged Plate cuts off the solids and allows the plate to seal properly.