Auro Power Systems (P) Ltd.

Ganga Nagar, Bangalore, Karnataka

• AdvantageGenerate own power, reduced energy/fuel bills Long term energy security

In this model, the customer invests on the solar project and Auro does the complete EPC and hands over the plant to the customer. The project can be grid tied or off-grid depending upon the grid power quality and customer need. Post installation Auro takes up the O&M of the plant at agreed annual costs for the plant upkeep and running.

• AdvantageAssured operation on all sunny days Remote monitoring Independence from Grid

Auro designs and installs solar water pumping solutions to varied needs including drinking water and irrigation. Auro is registered with NABARD for irrigation water pumps with subsidy as per NABARD schemes. The solar water pumping systems are tested as per MNRE requirements at TUV.

• FeatureFully automatic operation Option of manual start & transfer of load on DG

AMF panels find their application in Automation of Diesel generators. These panels are used to control the DG sets with respect to the mains condition. These panels are fitted with controller which senses the mains voltage & single phasing. Once mains failure is sensed, the DG start is provided & DG is started. Once DG is running, the loads are automatically transferred to the DG. Same way, when the mains supply becomes alright, DG is stopped & loads are automatically transferred to mains.

• FeatureAdvanced cooling method-IDC Close to 50% savings On Opex DC operated fans

AUROs FCU units use Induced Draught Cooling technology. These units are used in BTS shelters for saving operation cost. They are used as an alternate to standard Air conditioners when the ambient temperature levels are lower than the required shelter operating temperature. These units circulate outside ambient air into the shelter & the hot air is thrown out into the ambient by suitable fans. These units are fitted with filters to avoid dust entering the shelter. The operation is controlled by a microcontroller based console which monitors the inside outside temp & humidity. The console has provision for RS 485 communication for remote monitoring.