Other Products / Services #611917

Conveyor Painting Plant are used for painting of components for mass productions & generally upgraded from batch painting to conveyor painting because of following distinct advantages

• Saving in manpower cost
• Better process control & hence
• Saving in rejection cost
• Useful to add accelerated drying or curing oven
• Payback in 2 to 3 years if volume is more than 100 200 Nos. per shift (Smaller & medium component )
• In conveyor painting plant, each part moves through the manufacturing process at the same rate. If graphed, conveyor painting would be a straight line moving from start to finish. There is no wait time or down time because progress is happening constantly. Conveyor painting is well-suited for manufacturers with a large volume of parts, as they do not be required to manually move the parts into the next phase of the finishing process. However, it is important to note that the continuous flow of a conveyor system is not suited for lines containing parts of different size & shape.

We are offering gel coat booth. these gel coat booth is application used in major areas where use of plastic or pp or other plastic material can not be used due the high cost involved in the manufacturing of such plastics. Therefore fiberglass technology play a key role in manufacturing of large volume based light components. 1) automobile : automobile parts specially, door, trunk lids, wind deflectors, roof for busses and lorries are some parts where molding of plastics is difficult to attain, fiberglass painted with gel coat gives an atpar level of component. Since these gel coats are to be sprayed to get a better finish, there comes a necessity of get coat spray booth to avoid pollution and operator comfortability . 2)ship building & rail vehicles : autocoat engineering has already been in supply of gel coat booth for companies related to ship building and metro rail and other railway projects, for components like seats, roof top, side body, interiors of cruze line ships and interiors other railway projects. 3) wind energy: autocoat engineering with its other foreign tie-ups is proud to present get coat booths which can handle large volume based components like windmill rotar blades and its other body parts. 4) building and construction : autocoat engineering has also developed special gel coat booth for commodities like panels, corrugated sheets, light domes and light shafts, chemical l plants tanks, pipes where the gel coat is acidic in nature.

We are offering Industrial Painting of Windmill. Climate change concerns, International pressure to for less CO2 emissions coupled with high oil prices, peak oil, and increasing an energy demands has increased volumes of wind powered electricity. The Indian Wind Energy already has the 5th largest installed capacity in the world and is set to grow at a rapid pace driven by investments from the private sector attracted by the genero

We are offering control panel. we have a wide range of control panels that are in-house manufactured as per the latest technology. The control panels are available in standard as well as customized forms and can be availed as per the client requirements and specifications.

We are offering batch type oven. these batch type ovens are manufactured by high quality raw materials. These ovens can be availed at industrial leading price.

We are offering powder coating system. autocoat engineering provide specialized powder coating system which can take care of the color change problem (i.e. Pigments) in minimum time , so that the production is unhampered . We can manufacture, erection, commissioning of any type of painting system, powder coating system as a turnkey powder coating system including , pretreatment plant both dipping type and spray type and both conveyorised and batch type, ovens for paint . Powder coating system has become very popular in the industry for outdoor durability products also, thus now it is not restricted to household products only. Powder coating plant manufactured by autocoat engineering can give best results to handle any type of color or powder. powder coating solutions : autocoat engineering is best powder coating solutions for spray booths which are been made with the mild steel and stainless steel. Powder coating spray booths are been fitted with the quality spray guns and the paint tank. There are a lot of difficulties faced by the operator or the customer, to how to maintain a clean room concept while using powder coating equipment. Other difficulties faced by the user is the curing of the powder after it is been sprayed over the component. Autocoat engineering is one company that provides complete powder coating solutions to customers, all guiding parameters to how to use the powder coating equipments, what should be the gun pressure , sewing arrangement etc.

We are offering pvc enclosure. we offer high performing plastics enclosures, which are made from superior quality polycarbonate, frp and other raw materials. These enclosures are used for protecting electronic & pneumatic components.

We are offering small conveyorised paint plant. the small conveyorised paint plant is designed for specially suitable for powder coating of high volumes of components, large in size or small in size or any kind of product. These kind of conveyorised powder coating plant are mainly helpful where synchronization of product input verses product output is to be maintained without any time lag. These conveyorised powder coating plant are very elaborate in size which can accommodate two or more than two painters, automated painting guns or reciprocators etc. These are available with or without filter air set-up.

Wet Downdraft Booth

Pit Type DOWNDRAFT BOOTHS requires excavation and additional concrete work. DOWN DRAFT SPRAY BOOTH can be connected in line with air supply units or air replacement units for better performance.

Large Downdraft Paint Booths:-

Large Downdraft Painting Boothsare designed for hand spray of the largest types of work-earth moving equipment, tractors, locomotives, buses, cranes. Depending on the nature of the work, Large Downdraft Spray Booths may be either single sided or double sided and open partly enclosed of fully enclosed. Airflow is vertical from top to bottom through an either an open roof or through an air replacement system. Depending on the work to be carried out in Large Downdraft Paint Booth and Different material handling equipment. Open type Large Dry Downdraft Paint Booth is most popular & cost effective for all industrial products. Speciality of Autocoat Downdraft Booth fulfils.

• Complies to OPERATOR SAFETY
• Achieves FIRE SAFETY
• Fulfils POLLUTION NORMS.
• Helps to achieve QUALITY OF PAINT FINISH.
• Autocoat Engineering is the most experienced Dry Downdraft Paint booth Manufacturer in India since last 35 years. Autocoat Engineering have been manufacturing superior quality Water Downdraft Booth in India among other valuable products .We have wide experience of manufacturing Wet Downdraft Spray Booth with different material handling and different product size , and different production volume. Downdraft Booth Manufacturer in India & Downdraft Paint Booth Supplier in India

  Surface coating Plant Manufacturer in India & Painting Plant Manufacturer in India

autocoat downdraft booth are specially used for painting of heavy parts and large components, which are difficult to handle namely, wagons, earth moving machineries, chassis of vehicles, trailers, etc. In a downdraft booth air flows from top to bottom. And air draft is towards ground or to the exhaust chamber.

the wet downdraft booth can be single sided or double sided extraction chamber depending on the size of the component. Painter goes around the component to paint all sides of competence. The over spray paint particles exhausted are removed through grating & then to water tank. After turbulent action the paint particles are allowed to form a paint sludge & paint free air is exhausted to blowers and finally to atmosphere. Water wash downdraft paint booth is popular in mass production where paint consumption is very high. Such downdraft paint booth requires extensive civil work for paint booth as well as for paint sludge removal system & hence are expensive.

SPRAY BOOTHis engineered for maximum efficiency and economy. The Spray booth is designed to maintain an adequate velocity of clean air at the operator's breathing level and ensure that all the overspray paint is sucked into water tank. By keeping the operator's breathing level free from solvent and overspray paint, it is .possible to make the operators work continuously for longer periods, thereby increasing production and improving the quality of work.

TheSPRAY PAINT BOOTHeliminates messy pumps, filters, nozzles etc. and considerably reduces. Maintenance expenses, apart from increasing the water wash action ensuring a complete separation of pigment, resin and solvent with help of paint booth additive added, and allowing only the solvent to escape out along with the exhaust air.

Autocoat Engineering is one of the most renowned companies when it comes toINDIAN SPRAY BOOTHManufacturers in India & Spray Booth in India.

infrared curing ovendesigned to cure or dry water based or high solid stains, sealers, and top-coats. High velocity flash off sections enhances the curing process. Engineered to fit over your existing conveyor or built as an integral part of your new finishing system, drying tunnels are economical, reliable, easy to install.

ADVANTAGES OFinfrared curing oven system:

• Production speed
• Space considerations
• Presentation of parts
• Control
• Capital costs and maintenance
• theinfrared curing ovenare very environmentally friendly emitting no regulated pollutant gases.ELECTRIC INFRARED TYPE OVENS:

  Electric ovens use electric infrared elements, or sources. Electric infrared sources are heated by current flowing through a resistance heating element. The element and the material surrounding the element are heated to an incandescent temperature.

• All well designed electric ovens exhibit the following characteristics:

• Vertical and horizontal zoning. To provide an effective, flexible, and efficient application of electric infrared heating to a specific process.
• Precise layout and distribution of elements. To incorporate shape factors, overcome an edge effect, and provide greater flexibility.
• Insulated element wiring to provide additional life. To extend significantly the life of the infrared elements.
• Non-contact temperature sensors for control. To provide the optimum in temperature control.
• Rigid, non-vibrating structure, to extend the life of the elements.
• Custom control. To meet the specific needs of the process and the operators.

Autocoat has designed & developed wide series ofLAB BOOTHdesigned to fulfill stringent pollution norms as well as with amazingly low running cost. Autocoat is Manufacturer & Exporter ofLABORATORY BOOTHS.

AutocoatLab boothsare built to last: with the quality appearance, 100% assembly & Trials in-house ensure guarantied performance as well as at customers place. Autocoat computer generated labels & lamination, detailed drawings and well documented Manual will save you time and money when it comes to use of Laboratory Paint Booth effectively during its lifetime.

Autocoat has designed & developed wide series ofLAB BOOTHdesigned to fulfill stringent pollution norms as well as with amazingly low running cost. Autocoat is Manufacturer & Exporter ofLABORATORY BOOTHS.

AutocoatLab boothsare built to last: with the quality appearance, 100% assembly & Trials in-house ensure guarantied performance as well as at customers place. Autocoat computer generated labels & lamination, detailed drawings and well documented Manual will save you time and money when it comes to use of Laboratory Paint Booth effectively during its lifetime.

Why to consider Autocoat?

AUTOCOAT WATER LAB BOOTHis designed with the Pumpless miniature washing chamber which with the turbulent action sparest paint particles. The best advantage of WATER TYPE LAB BOOTH is that lumps of waste paint are collected in the collection tank thereby helping the user to dispose it easily. Autocoat Water Lab Booth is ideally suitable for Samples of all types of Baking or Air Dry Paint / Water Base or Solvent Based Paint / primer or Sealer or Undercoat & Finishing coat / Epoxy or Alkyd or Acrylic or Polyurethane etc

AUTOCOAT DRY LAB BOOTHis ideally suitable for Samples of all Non-sticky overspray like Air Dry Paint / Quick Drying Polyurethane Paint or similar Paint which produces Non-sticky over-sprayed Paint Particles.

Autocoat Rubber Bonding Spray Booth is also popular with Design changes & many Rubber Bonding Paint Booths are in use OEM in India.

Autocoat New series ofDRY BACK LAB BOOTHdesign incorporates: -

• Specialty 4 level filtration.
• Suitable for low paint consumption & for PU & Air Drying paint (Non sticky paint).
• Specialty Metal Baffle design insures filter replacement cost at Amazingly low.
• Meets pollution norms of Particulate Matter.
• Capital cost less than water wash booth.

  Unlike Autocoat Dry Back Paint Booth competitors paint booth are often provided with paint filters which chocks in no time (for chocking of filters can be 1 week if paint consumption 10 ltrs. Per/Shift) and must be replaced to get same performance in the paint booth & if not replaced then painter will be uncomfortable & resist carrying on painting Production loss

  While Submission of Quote Autocoat insists to collect office Room Plan for technical suitability of performance especially if the Lab room is closed Type with the starving for air intake. Each quote is given with AutoCAD Drawing.

  Autocoat Engineering is the most experiencedLaboratory Booth Manufacturerin India since last 35 years. Autocoat Engineering have been manufacturing superior quality LAB BOOTH IN INDIA among other valuable products .We have wide experience of manufacturing lab Booth with different material handling and different product size , and different production volume.

  Lab Booth & Laboratory Booth in India Manufacturer in India & Lab Spray Booth Supplier in India

Autocoat Downdraft Booth are specially used for painting of heavy parts and large components, which are difficult to handle namely, wagons, earth moving machineries, chassis of vehicles, trailers, etc. In a DOWNDRAFT BOOTH air flows from top to bottom. And Air Draft is towards ground or to the exhaust chamber.

The Wet Downdraft Booth can be single sided or double sided extraction chamber depending on the size of the component. Painter goes around the component to paint all sides of competence. The over spray paint particles exhausted are removed through grating & then to water tank. After turbulent action the paint particles are allowed to form a paint sludge & Paint Free air is exhausted to blowers and finally to atmosphere. Water Wash Downdraft Paint Booth is popular in mass production where paint consumption is very high. Such Downdraft Paint Booth requires Extensive civil work for Paint Booth as well as for Paint sludge removal system & hence are expensive.

autocoat has designed & developed wide series oflab boothdesigned to fulfill stringent pollution norms as well as with amazingly low running cost. Autocoat is manufacturer & exporter oflaboratory booths.

autocoatlab boothsare built to last: with the quality appearance, 100% assembly & trials in-house ensure guarantied performance as well as at customers place. Autocoat computer generated labels & lamination, detailed drawings and well documented manual will save you time and money when it comes to use of laboratory paint booth effectively during its lifetime.

autocoat water lab boothis designed with the pumpless miniature washing chamber which with the turbulent action sparest paint particles. The best advantage of water type lab booth is that lumps of waste paint are collected in the collection tank thereby helping the user to dispose it easily. Autocoat water lab booth is ideally suitable for samples of all types of baking or air dry paint / water base or solvent based paint / primer or sealer or undercoat & finishing coat / epoxy or alkyd or acrylic or polyurethane etc

autocoat dry lab boothis ideally suitable for samples of all non-sticky overspray like air dry paint / quick drying polyurethane paint or similar paint which produces non-sticky over-sprayed paint particles.

autocoat rubber bonding spray booth is also popular with design changes & many rubber bonding paint booths are in use oem in india.

autocoat new series ofdry back lab boothdesign incorporates: -

• specialty 4 level filtration.
• suitable for low paint consumption & for pu & air drying paint (non sticky paint).
• specialty metal baffle design insures filter replacement cost at amazingly low.
• meets pollution norms of particulate matter.
• capital cost less than water wash booth.

  unlike autocoat dry back paint booth competitors paint booth are often provided with paint filters which chocks in no time (for chocking of filters can be 1 week if paint consumption 10 ltrs. Per/shift) and must be replaced to get same performance in the paint booth & if not replaced then painter will be uncomfortable & resist carrying on painting production loss

  while submission of quote autocoat insists to collect office room plan for technical suitability of performance especially if the lab room is closed type with the starving for air intake. Each quote is given with autocad drawing.

  autocoat engineering is the most experiencedlaboratory booth manufacturerin india since last 35 years. Autocoat engineering have been manufacturing superior quality lab booth in india among other valuable products .we have wide experience of manufacturing lab booth with different material handling and different product size , and different production volume.

  lab booth & laboratory booth in india manufacturer in india & lab spray booth supplier in india