We are engaged in offering Battery Desulfators. Products offered by us are suitable for various applications and widely demanded by the clients nationwide.

Our cell safe Battery Desulfator is a advanced state of the art fully automatic electronic device which produces a unique pulse by using power from battery itself. The pulse waveform has a strictly controlled signal amplitude, rise time, frequency and on off time. The cell safe works on all types of lead acid batteries. It is a fit and forget device. Its operation is fully automatic and no attention is required. As mentioned above, the irreversible sulfation formation is very slow process and does not form in few days. It is a cyclic process, initial small irreversible sulfation leads to prevent charging.

Now less charging leads to more IRR. Sulfation and vice versa. If you see the graph of any lead battery life, then you will come to know that the battery which works 100% for first 2 years dies only in next 6 months time. Cell safe works 24 hours and 365 days. It provides a unique pulse waveform which gives a vibratory shocks to both plates. This time is is very short in microseconds so the IRR sulfate crystals formed on plates gets deboned and returned to electrolyte solution as active material. This process and action is repeated unless until battery voltage is decreases to 10.5 V DC in Inverter model and 12.5 V DC in automobile model.

Advantages:

• No irreversible sulfation formation through out the battery life (if installed on new battery or within 4- 6 months).


• Battery will remain in peak condition.


• Batterys internal impedance will be reduced.


• The electrolyte temp. will be minimum.


• Less or almost nil DM water topping is required.


• No boiling of electrolyte hence no acid fumes or acid smelling.


• A sulfated battery requires more electricity for charging process. This is because of high battery impedance.


• Guaranteed double battery life in normal working conditions.

In last 9 years we have got very and outstanding results of Battery Desulfator in long term use:

• We have one battery (Exide express MHD 88 fitted with inverter) installed in march 2004. It giving 75 % output on today. As this battery is meant for tractor and its main function is to start tractor engine. This battery is doing its job and on today also it can start a tractor engine.


• We have one Maruti Wagon car in Panvel Navi Mumbai MH o6 AB 5456 mfg. Year October 2006. This car is still running smoothly with 1st yr battery supplied by Maruti company.

Keeping in mind the diverse requirements of the clients, we also offered our clients Automatic Battery Watering System. This watering system in battery is easy to install and are performance oriented. We offer them in different technical specifications and can be customized as per the requirement of our clients. Moreover, this service is offered at most reasonable rate.
Keeping in mind the diverse requirements of the clients, we also offered automatic Battery Watering Systems which includes below parts.

• Fully automatic watering plug: This special allows dm water to each cell if the electrolyte level is below maximum mark.

• Water feed pump: The function of this pump is to feed water 5 l storage container to each watering plug with min 5 psi pressure, it also gives signal to main control unit to stop filling cycle when all cells are filled to maximum mark.

• Main control unit: The function unit to control all operation without any human interference. It works on 12 V DC battery supply only and does not any external supply. It takes input signal from watering feed pump and again gives on/off signal to water feed pump.

Features:

• Fully automatic water filling operation.


• No human interference.


• Operates on battery supply it self hence no external supply required.


• Robust and heavy duty construction.


• Long life.

How it works:

Each watering plug is designed in such a way that it will not allow single drop of dm water when cells electrolyte level reaches to max mark. We will understand working of battery watering system step by step.

• Step 1: On 1st day of each month at a certain time say 11 am. The water feed pump will start automatically without any human interference.


• Step 2: Water will get inside in each cell which has electrolyte level below maximum mark. If the electrolyte level is above or equal to maximum mark then special watering plug will remain in shut off condition. In short the DM water filling takes place only when electrolyte level is below maximum mark.


• Step 3: When all cells electrolyte level reaches to maximum mark then there will not be any flow from water feed pump and it gives signal to main control unit.


• Step 4: Main control gives switch off signal to water feed pump. End of water filling cycle. After 15 days that 16th day of each month the above operation will be repeated automatically

keeping in mind the diverse requirements of the clients, we also offered our clients automatic battery watering system. This watering system in battery is easy to install and are performance oriented. We offer them in different technical specifications and can be customized as per the requirement of our clients. Moreover, this service is offered at most reasonable rate.
keeping in mind the diverse requirements of the clients, we also offered automatic battery watering systems which includes below parts.

• fully automatic watering plug:this special allows dm water to each cell if the electrolyte level is below maximum mark.

• water feed pump:the function of this pump is to feed water 5 l storage container to each watering plug with min 5 psi pressure, it also gives signal to main control unit to stop filling cycle when all cells are filled to maximum mark.

• main control unit:the function unit to control all operation without any human interference. It works on 12 v dc battery supply only and does not any external supply. It takes input signal from watering feed pump and again gives on/off signal to water feed pump.

features:

• fully automatic water filling operation.


• no human interference.


• operates on battery supply it self hence no external supply required.


• robust and heavy duty construction.


• long life.

how it works:

each watering plug is designed in such a way that it will not allow single drop of dm water when cells electrolyte level reaches to max mark. We will understand working of battery watering system step by step.

• step 1:on 1st day of each month at a certain time say 11 am. The water feed pump will start automatically without any human interference.


• step 2:water will get inside in each cell which has electrolyte level below maximum mark. If the electrolyte level is above or equal to maximum mark then special watering plug will remain in shut off condition. In short the dm water filling takes place only when electrolyte level is below maximum mark.


• step 3:when all cells electrolyte level reaches to maximum mark then there will not be any flow from water feed pump and it gives signal to main control unit.


• step 4:main control gives switch off signal to water feed pump. End of water filling cycle. After 15 days that 16th day of each month the above operation will be repeated automatically

We offer our client and excellent range of Magnetic Fuel Saver for petrol, LPG and CNG/PNG. These Magnetic Fuel Savers are well known in the market due to its quality and reliability.

Magnetic Fuel Saver is simple, economical and most reliable fuel saving system available in the market. These fuel max is scientifically designed and tested TO fracture hydrocarbon chain which result in complete combustion of hydrocarbon fuel like petrol, LPG, CNG & PNG.

Applications:

• CNG:Magnetic Fuel Saver is used inAuto Rickshaw, 4 Wheelers, 3 Wheelers, trucks and saving upto 20%


• PETROL:Magnetic Fuel Saver is used inall Automobiles & Motorcycles and saving upto 15%


• PNG:MagneticFuel Saver is used in allDomestic cooking application & commercial hotels, bakery etc and saving upto 20%


• Diesel :Magnetic Fuel Saver is used in Automobiles Buses, Trucks, JCB, Construction Equipments, Cranes, DG Sets ets and saving upto 8 %.

Features:

• Increases the output of fuel.


• Increases thermal efficiency of fuel.


• No consumable fuel additives are required.


• Reduces carbon buildup on internal engine walls.


• Reduces emission levels.


• No need to cut or alter pipe as installation is from outside.


• Reduces pollution and leads to cleaner environment.

We are engaged in offering Battery Desulfators. Products offered by us are suitable for various applications and widely demanded by the clients nationwide.

Our cell safe Battery Desulfator is a advanced state of the art fully automatic electronic device which produces a unique pulse by using power from battery itself. The pulse waveform has a strictly controlled signal amplitude, rise time, frequency and on off time. The cell safe works on all types of lead acid batteries. It is a fit and forget device. Its operation is fully automatic and no attention is required. As mentioned above, the irreversible sulfation formation is very slow process and does not form in few days. It is a cyclic process, initial small irreversible sulfation leads to prevent charging.

Now less charging leads to more IRR. Sulfation and vice versa. If you see the graph of any lead battery life, then you will come to know that the battery which works 100% for first 2 years dies only in next 6 months time. Cell safe works 24 hours and 365 days. It provides a unique pulse waveform which gives a vibratory shocks to both plates. This time is is very short in microseconds so the IRR sulfate crystals formed on plates gets deboned and returned to electrolyte solution as active material. This process and action is repeated unless until battery voltage is decreases to 10.5 V DC in Inverter model and 12.5 V DC in automobile model.

Advantages:

• No irreversible sulfation formation through out the battery life (if installed on new battery or within 4- 6 months).


• Battery will remain in peak condition.


• Batterys internal impedance will be reduced.


• The electrolyte temp. will be minimum.


• Less or almost nil DM water topping is required.


• No boiling of electrolyte hence no acid fumes or acid smelling.


• A sulfated battery requires more electricity for charging process. This is because of high battery impedance.


• Guaranteed double battery life in normal working conditions.

In last 9 years we have got very and outstanding results of Battery Desulfator in long term use:

• We have one battery (Exide express MHD 88 fitted with inverter) installed in march 2004. It giving 75 % output on today. As this battery is meant for tractor and its main function is to start tractor engine. This battery is doing its job and on today also it can start a tractor engine.


• We have one Maruti Wagon car in Panvel Navi Mumbai MH o6 AB 5456 mfg. Year October 2006. This car is still running smoothly with 1st yr battery supplied by Maruti company.

Keeping in mind the diverse requirements of the clients, we also offered our clients Automatic Battery Watering System. This watering system in battery is easy to install and are performance oriented. We offer them in different technical specifications and can be customized as per the requirement of our clients. Moreover, this service is offered at most reasonable rate.
Keeping in mind the diverse requirements of the clients, we also offered automatic Battery Watering Systems which includes below parts.

• Fully automatic watering plug: This special allows dm water to each cell if the electrolyte level is below maximum mark.

• Water feed pump: The function of this pump is to feed water 5 l storage container to each watering plug with min 5 psi pressure, it also gives signal to main control unit to stop filling cycle when all cells are filled to maximum mark.

• Main control unit: The function unit to control all operation without any human interference. It works on 12 V DC battery supply only and does not any external supply. It takes input signal from watering feed pump and again gives on/off signal to water feed pump.

Features:

• Fully automatic water filling operation.


• No human interference.


• Operates on battery supply it self hence no external supply required.


• Robust and heavy duty construction.


• Long life.

How it works:

Each watering plug is designed in such a way that it will not allow single drop of dm water when cells electrolyte level reaches to max mark. We will understand working of battery watering system step by step.

• Step 1: On 1st day of each month at a certain time say 11 am. The water feed pump will start automatically without any human interference.


• Step 2: Water will get inside in each cell which has electrolyte level below maximum mark. If the electrolyte level is above or equal to maximum mark then special watering plug will remain in shut off condition. In short the DM water filling takes place only when electrolyte level is below maximum mark.


• Step 3: When all cells electrolyte level reaches to maximum mark then there will not be any flow from water feed pump and it gives signal to main control unit.


• Step 4: Main control gives switch off signal to water feed pump. End of water filling cycle. After 15 days that 16th day of each month the above operation will be repeated automatically

keeping in mind the diverse requirements of the clients, we also offered our clients automatic battery watering system. This watering system in battery is easy to install and are performance oriented. We offer them in different technical specifications and can be customized as per the requirement of our clients. Moreover, this service is offered at most reasonable rate.
keeping in mind the diverse requirements of the clients, we also offered automatic battery watering systems which includes below parts.

• fully automatic watering plug:this special allows dm water to each cell if the electrolyte level is below maximum mark.

• water feed pump:the function of this pump is to feed water 5 l storage container to each watering plug with min 5 psi pressure, it also gives signal to main control unit to stop filling cycle when all cells are filled to maximum mark.

• main control unit:the function unit to control all operation without any human interference. It works on 12 v dc battery supply only and does not any external supply. It takes input signal from watering feed pump and again gives on/off signal to water feed pump.

features:

• fully automatic water filling operation.


• no human interference.


• operates on battery supply it self hence no external supply required.


• robust and heavy duty construction.


• long life.

how it works:

each watering plug is designed in such a way that it will not allow single drop of dm water when cells electrolyte level reaches to max mark. We will understand working of battery watering system step by step.

• step 1:on 1st day of each month at a certain time say 11 am. The water feed pump will start automatically without any human interference.


• step 2:water will get inside in each cell which has electrolyte level below maximum mark. If the electrolyte level is above or equal to maximum mark then special watering plug will remain in shut off condition. In short the dm water filling takes place only when electrolyte level is below maximum mark.


• step 3:when all cells electrolyte level reaches to maximum mark then there will not be any flow from water feed pump and it gives signal to main control unit.


• step 4:main control gives switch off signal to water feed pump. End of water filling cycle. After 15 days that 16th day of each month the above operation will be repeated automatically

We offer our client and excellent range of Magnetic Fuel Saver for petrol, LPG and CNG/PNG. These Magnetic Fuel Savers are well known in the market due to its quality and reliability.

Magnetic Fuel Saver is simple, economical and most reliable fuel saving system available in the market. These fuel max is scientifically designed and tested TO fracture hydrocarbon chain which result in complete combustion of hydrocarbon fuel like petrol, LPG, CNG & PNG.

Applications:

• CNG:Magnetic Fuel Saver is used inAuto Rickshaw, 4 Wheelers, 3 Wheelers, trucks and saving upto 20%


• PETROL:Magnetic Fuel Saver is used inall Automobiles & Motorcycles and saving upto 15%


• PNG:MagneticFuel Saver is used in allDomestic cooking application & commercial hotels, bakery etc and saving upto 20%


• Diesel :Magnetic Fuel Saver is used in Automobiles Buses, Trucks, JCB, Construction Equipments, Cranes, DG Sets ets and saving upto 8 %.

Features:

• Increases the output of fuel.


• Increases thermal efficiency of fuel.


• No consumable fuel additives are required.


• Reduces carbon buildup on internal engine walls.


• Reduces emission levels.


• No need to cut or alter pipe as installation is from outside.


• Reduces pollution and leads to cleaner environment.