Automark Industries (I) PVT Ltd.

Dhantoli, Nagpur, Maharashtra

Primer Application Machine :   A unique design has been used for the manufacturing of this machine, power for the pump is drawn from the movement of the machine itself. Tank capacity of 40 liters & pointer to mark straight lines. Uniform thickness is achieved in width upto 50 cm.The machine is hand push & easy to use & maintain. Also the operating cost is minimum.

Engine :  Briggs & Stratton Electric Start, 13HP Petrol driven, 3600 RPM, air cooled & Environment friendly engine. Chassis :  Strong & stable welded profile frame construction. Motor & Hydraulic pump mounted in one unit but separated from chassis frame. Transmission :  Hydrostatic pump to produce 0−5 km/hr marking speed, smooth start & stop. Directly connected with High torque hydraulic motor. Air Compressor :  Twin Cylinder air compressor light weight capable to produce  330 Litre/Min of air. Silencer for compressor, air-safety valve, air storage tank. Material Tank :  125 Litre (250 kg). Stainless steel tank to avoid corrosion. Agitator with vertically mounted agitating arm. The Material Tank is provided with an outer jacket fitted with dial type temperature gauge 30°C to 400°C to maintain the uniform temperature of the material. Electronic Skip-Line Device :  Control panel is equipped with raised buttons; each button has its own symbol for ease of operation. Control unit is water proof. 10 Marking operations can be pre-programmed. Automatic marking system for cycle of beginning and stop by pressing just one button. Glass Beads Dispenser :  For 10cm and 15cm width. The unit is adjusted for minimum discharge of glass beads @ 300 gm/m². Linked via chain drive from wheels of the machine hence quantity of dispensed glass beads is constant irrespective of speed of the machine, thereby assuring constant quantity of beads every time at any marking speed. Glass beads storage box with glass window to monitor quantity available Agitator Transmission :  High torque hydraulic motor fitted on Stainless Steel Material Tank for continuous, uniform & consistent mixing of material. Hydraulic motor driven with motor shaft, safety valve and On-Off valve. Reversible mixing arrangement in thermoplastic tank. Steering :  Rack & Pinion system steering reducing strain on operator & producing straighter markings & smoother curves. Lower turning radius & excellent maneuverability. Hydraulic Oil Tank :  35 Litre. Oil tank with suction filter. Screed Shoe :  Available in 10 & 15 cm widths. Pneumatics :  Pneumatic valves & fittings to avoid air leakages. Burners :  Accurate temperature monitoring & control through ring type burners for tank & screed. Safety :  Suitable temperature gauges provided separately for the paint tank, two fog lamps on front side & one safety traffic revolving light on the rear side with chargeable battery reduce the chances of accident. Heating System :  LPG supplies through heavy duty burners under the tank, screed box & hand torch.

HAND PROPELLED THERMOPLASTIC ROAD MARKING MACHINE : MODEL - T-5   T-5 :- Manual Thermoplastic Road Marking Machine (Screed Type) Manually operated machine having provision to lock the movement in straight line   Front mounted pointer guide adjustable according to laying shoe size. Heating System :  LPG supply through heavy duty ring type burners for material tank and screed box. Hand torch provided for safe lighting of burners. 90 Ltr. Stainless steel tank  to avoid corrosion. Agitator with vertically mounted agitating arm. The material tank is provided with a outer jacket fitted with dial type temperature gauge 30º C - 400º C to maintain the uniform temperature of the material. Screed shoe:  Available in 10cm and 15cm widths. Glass Beads Dispenser :  For 10cm and 15cm width. The unit is adjusted for minimum dischare of glass beads @ 300 gms/m2. Linked via chain drive from wheels of the machine hence quantity of dispensed glass beads is constant irrespective of speed of the machine, thereby assuring constant quantity bead every time at any marking speed. Glass beads storage box  with window to keep a watch on quantity available in the box. Lockable Rear Castor :  Straight track locked position or 360 degree swivel.

MODEL- PH-20  &  PH-10 :-   Oil jacketed thermoplastic preheater, fitted with water cooled 9 BHP diesel engine, reduction gear power transmission ideal for continuous stirring providing homogeneous molten thermoplastic . The system is heated by LPG, through heavy duty, high pressure radial burners of high standard available in heating industry, can be operated continuously for 8-10 hours. All pipe works, valves and regulators are easily accessible. Hand torch fitted for trouble free operation. Equipment is skid mounted, can be transported in a mini truck . This will act as feeder vehicle to a hand propelled or automatic applicator to produce 500 M 2   of marking a day . Available in 250 kgs (Capacity 10 Bags)  and  500 kgs  ( Capacity  20 Bags).  

Model A-5 :-    Cold Paint Road Marking Machine for Marking using Enamel Paints and for application of Primers on Concrete Surfaces.

Automark Technologies (India) Pvt. Ltd. can manufacture thermoplastic road marking materials to comply with the following standards, or as required by our customers: MORTH,   BS 3262:Part 1:1989, BS EN 1871, JIS K 5655, AASHTO M-249 We provide different grades of thermoplastic materials depending on whether the application is to be screed, extrusion or spray. Automark Technologies (India) Pvt. Ltd. is also able to provide specialized thermoplastic materials for producing structured road markings and raised profile marking / rib marking. We manufacture our thermoplastic materials to meet the various climatic conditions encountered around the world. Thermoplastic materials are available in white and yellow colours. We can manufacture other colours on request. Technical Data Sheets and MSDS available on request.    

Permark 2K cold plastic Road Marking Material is weather & high abrasion resistant and have much longer life and are recommended for high traffic areas to perform excellently in areas like pedestrian crossings which are more prone to wearing out and can be applied on 

Tacmark Tactile Marking is developed to maintain the safety of the visually impaired and older drivers due to deterioration of visual capabilities with the age.

“ i-lite ”  RPM gives the better vision of the road in night time & when the roads are wet.  “ i-lite ”  RPM are more effective than road marking under wet conditions & helps driver in distinguishing lanes in night & wet conditions thus, avoides chances of accidents. “ i-lite ”  RPM is manufactured strictly as per  MoRTH  &  ASTM specifications & keeping in view of Indian vehicular traffic by giving excess compressive strength of more than 30, 000 kgs which most of the other branded RPM's failed to sustain. The reflective panels of  “ i-lite ”  RPM are designed to sustain clogging due to moisture or dirt & are able to guide the traveller in unfavorable road climatic conditions such as rain & fog.