The company is offering High Pressure Seamless Gas Cylinders in various specifications such as water capacity, test and working pressure, etc. We make use of high-quality seamless tube while manufacturing High Pressure Seamless Gas Cylinder. We also ensure that High Pressure Seamless Gas Cylinders are made in compliance with IS: 7285. Further, these High Pressure Seamless Gas Cylinders are certified and duly approved by Chief Controller of Explosives, Government of India, Nagpur.

Specifications

• Working Pressure at 150, 200, 230 kg/cm3
  
• Test Pressure at 250, 334, 360 kg/cm3
  
• Water Capacity : 1 to 70 litres
  
• Cylinder Capacity : 0.5M3 to 10 M3

Note : Cylinders can also be supplied as per customers specifications.

A Flash Back Arrestor is a system frequently found in oxy-fuel welding and chopping to prevent the fire from using the pipes to get right back up in to the apparatus and creating injury or explosions. Both major forms of these apparatus are dry and wet. Each has a unique benefit and disadvantage. At Axcel Gases one can find many popular Oxy-Fuel Flash Back Arrestors that would be dry. Dry Flash Back Arrestors usually use a variety of strategies to prevent flashback. This is the form that's usually within many workshops, houses and lightweight oxy-fuel packages because they perform in the same way successfully with any direction, require almost no preservation, and in many cases are little and mild enough to be mounted involving the flashlight and hoses.

One important part is heat-triggered valves to prevent the gasoline movement completely. Since it depends on removing temperature from the flashback to prevent it from going on, many arrestors have a temperature-controlled device that may take off the gasoline movement when the system reaches about 90C, till possibly the system cools or the reset switch is pushed.

Fluid Close Fire Arrestors are water barriers following concept of a siphon where in actuality the water prevents the entering deflagration and/or detonation and extinguishes the flame. They perform by facilitating the gasoline via non-flammable and preferably non-gas-absorbing water, which can be usually water. They end the relationship by stopping it from achieving the absorbed intake.

These units are commonly very efficient at ending flashbacks from achieving the secured part of the system. They've the drawbacks of just one direction and are generally significantly bigger than dried form arrestors. That makes them primarily just ideal for big or set installations and the water stage must be continually checked. These Wet Flash Back Arrestors are mainly used in industrial scenarios as opposed to the former.

Sulfur Hexafluoride is an inorganic, colorless, odorless, non-flammable, extremely potent greenhouse gas which is an excellent electrical insulator. Sulfur Hexafluoride is poorly soluble in water but soluble in nonpolar organic solvents. Sulfur Hexafluoride is generally transported as a liquefied compressed gas. Sulfur Hexafluoride has a density of 6.12 g/L at sea level conditions, which is considerably higher than the density of air (1.225 g/L).

The maximum production of SF6 is used as a gaseous dielectric medium in the electrical industry, an inert gas for the casting of magnesium, and as an inert filling for insulated glazing windows. Moreover, we have emerged as a Sulfur Hexafluoride Manufacturer, Supplier and Exporter from India.

The company is offering High Pressure Seamless Gas Cylinders in various specifications such as water capacity, test and working pressure, etc. We make use of high-quality seamless tube while manufacturing High Pressure Seamless Gas Cylinder. We also ensure that High Pressure Seamless Gas Cylinders are made in compliance with IS: 7285. Further, these High Pressure Seamless Gas Cylinders are certified and duly approved by Chief Controller of Explosives, Government of India, Nagpur. Specifications

• Working Pressure at 150, 200, 230 kg/cm3
• Test Pressure at 250, 334, 360 kg/cm3
• Water Capacity : 1 to 70 litres
• Cylinder Capacity : 0.5M3 to 10 M3

Note : Cylinders can also be supplied as per customers specifications.

A Flash Back Arrestor is a system frequently found in oxy-fuel welding and chopping to prevent the fire from using the pipes to get right back up in to the apparatus and creating injury or explosions. Both major forms of these apparatus are dry and wet. Each has a unique benefit and disadvantage. At Axcel Gases one can find many popular Oxy-Fuel Flash Back Arrestors that would be dry. Dry Flash Back Arrestors usually use a variety of strategies to prevent flashback. This is the form that's usually within many workshops, houses and lightweight oxy-fuel packages because they perform in the same way successfully with any direction, require almost no preservation, and in many cases are little and mild enough to be mounted involving the flashlight and hoses. One important part is heat-triggered valves to prevent the gasoline movement completely. Since it depends on removing temperature from the flashback to prevent it from going on, many arrestors have a temperature-controlled device that may take off the gasoline movement when the system reaches about 90C, till possibly the system cools or the reset switch is pushed. Fluid Close Fire Arrestors are water barriers following concept of a siphon where in actuality the water prevents the entering deflagration and/or detonation and extinguishes the flame. They perform by facilitating the gasoline via non-flammable and preferably non-gas-absorbing water, which can be usually water. They end the relationship by stopping it from achieving the absorbed intake. These units are commonly very efficient at ending flashbacks from achieving the secured part of the system. They've the drawbacks of just one direction and are generally significantly bigger than dried form arrestors. That makes them primarily just ideal for big or set installations and the water stage must be continually checked. These Wet Flash Back Arrestors are mainly used in industrial scenarios as opposed to the former.

Sulfur Hexafluoride is an inorganic, colorless, odorless, non-flammable, extremely potent greenhouse gas which is an excellent electrical insulator. Sulfur Hexafluoride is poorly soluble in water but soluble in nonpolar organic solvents. Sulfur Hexafluoride is generally transported as a liquefied compressed gas. Sulfur Hexafluoride has a density of 6.12 g/L at sea level conditions, which is considerably higher than the density of air (1.225 g/L). The maximum production of SF6 is used as a gaseous dielectric medium in the electrical industry, an inert gas for the casting of magnesium, and as an inert filling for insulated glazing windows. Moreover, we have emerged as a Sulfur Hexafluoride Manufacturer, Supplier and Exporter from India.