Axis Thermal Engineering Company

Sanganoor, Coimbatore, Tamil Nadu

We are offering bale out furnace. pumping & heating unit: • model name: simplex pumping & heating unit (sph)  duplex pumping & duplex heating unit (dpdh)  transfer pumping unit • technical name: pumping station, oil handling unit, hfo booster,  on - line heater, on - line heating unit • flow rate: 50 lph – 5000lph • heater capacity: 2 kw – 120 kw • power: 0.5hp – 40 hp • product description: this unit generally used in all applications where the fuel required to be supplied at constant pressure and constant viscosity. In general, pumping unit/pumping and heating unit consists of pump coupled with motor, (on-line heaters with temperature control unit), back pressure regulating valve, interconnected with seamless ms pipes, assembled on a compact tray with drain cock valve. • advantages: 0% break-down free pumping system.  compact equipment.  wastage of oil during transportation will be avoided.  ensures effective combustion.  ensures carbon-free atomizing.  avoid nozzle chocking.  maintains constant pressure irrespective to the head pressure. • optional accessories: flow meter, viscous meter, digital temperature control system. • safety: all necessary factors are incorporated to avoid any dangerous condition of the unit. Unit will shuts/stops the fuel flow immediately after the signal point.

We are offering centrifugal air blower. centrifugal air blower: • pressure: 2”wg–62”wg, 50mm wg–1575mm wg, & 500pa-16000pa • volume: 25cfm - 300000cfm, 45nm³/hr – 510000nm³/hr • power: 1 hp - 120 hp, 0.75kw – 160kw • technical name: blower, air blower, hot air blower, suction blower, air fan, dust collection fan, id fan, combustion air blower, atomizing air blower, twin discharge blower, sisw, didw, belt drive blower, coupling drive blower. • product description: a blower generally used in the applications like combustion, atomizing, blowing, drying, suction and many more. Blower consists of a fabricated mild steel/stainless steel body, impeller of cr sheet mild steel/stainless steel ss304, ss310 and ss 316, fiber reinforced plastic (frp impeller/fan), aluminium, gun metal, balanced statically and dynamically, assembled on a cast boss, driven by motor/engine. • advantages: flat pressure characteristic design.  size of the blower body materials depends on the application, energy efficient design.  silencer will be optional for low air noise.  auto damper will be optional for less torque of the motor. • specialties: wide varieties to choose based on the application.  blower efficiency is designed for 90% • optional accessories: silencer, auto damper. bale out furnace: • technical name: furnace, electrical bale out furnace, gas fired furnace, crucible , furnace, oil fired bale out furnace, aluminum bale out furnace, indirect melting furnace, batch melting furnace. • application: aluminium, copper, lead, zinc melting. • product description: a cubical shell furnace, which will be stationary furnace, used in melting all kinds of non-ferrous melting, lead oxide kettle, zinc kettle etc., indirect type melting ensures the loss of metals due to oxidation/carbon deposit by the fuel or combustion properties. Furnace is lined with refractory and insulation brick to hold the liquid metal to a temperature of 1200 ◦c. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace. • advantages: our furnaces are designed in such a way to reduce the fuel consumption. Our furnaces are lined with both refractory bricks and ceramic fibre modules, in such a way to pass the flue gas around the crucible enabling high conduction and convection heat transfer. Combustion/heating equipments are designed to meet the requirements of furnace and heat transfer rate. Burner will be positioned inclined to an angle, so that the flame/flue skips on the surface of the material. Better heat transfer rate through circulation and recirculation. Our furnaces are designed for skin temperature of 65◦c (maximum). • specialties: manual operating furnace, automatic operating furnace, air/fuel ratio regulating system, mass flow control system, pressure balancing system, flue control system. • optional accessories: pre heating the scrap before charging can be done. Recuperator to pass the combustion air into the burner at a temperature of 150◦c (minimum) for fuel saving up to 40%. • capacity: 500 kgs - customer’s requirement. • heat generated by: light oil/heavy oil/furnace oil/ natural gas/ cng/lpg/propane/butane/ producer gas/bio gas • lining: refractory and insulation bricks based on the temperature and operation of the furnace. • specification of the latest supplied equipment: 350kgs bale out furnace for aluminium melting at m/s . Craftsman, coimbatore, india. • best fuel achieved: 90 liters of diesel/ton of liquid aluminium.

We are offering heat treatment furnace. heat treatment furnace: • product name: heat treatment furnace • technical names : stationary hearth furnace, bell annealing furnace, controlled atmosphere furnace, heating furnace, heat treatment furnace, gas fired heat treatment furnace, oil fired heat treatment furnace. • application: anodizing, stress relieving, annealing, normalizing, heating, hardening, batch kiln, heat treatment, bulk heat treatment furnace, batch type heat treatment furnace. • product description: a cubical furnace has two parts, one is nonmoving shell with combustion system, the other part is used to load, carry, and unload the material to be heated. A furnace used for all other standard applications as mentioned. It also can be used in the applications of specialized treatment processes. • advantages: our furnaces are designed in such a way to reduce the fuel consumption. Combustion/ heating equipments are designed with the thermal equations. Our heating systems will be positioned in order to better heat transfer rate through circulation and re-circulation. Our furnaces are designed for skin temperature of 65◦c (maximum) • specialties: manual operating furnace, automatic operating furnace, air/fuel ratio regulating system, mass flow control system, pressure balancing system, flue control system. • optional accessories: tilting of the bogie can be done for easy unloading of hot material door operations can be done with hydraulic for ease in opening and closing doors for heavy capacity furnaces. • capacity: 500 kgs - customer’s requirement. • heat generated by: electric/ light oil/heavy oil/furnace oil/ natural gas/ cng/lpg/propane/ butane/producer gas/bio gas • lining: refractory and insulation bricks and ceramic fibre blankets based on the temperature and operation of the furnace • specifications of the latest supplied equipment : 30 ton fuel fired bogie hearth heat treatment • best fuel achieved: 28-31 liters of hsd/ton • best temperature /accuracy maintained : ± 1◦c for temperature @ 600 ◦c, ± 0.5◦c for temperature @ 1280 ◦c