Our Product / Services
Applications
These products are offered in thicknesses of 0.5mm 1.0mm, 1.5mm, 2.0mm and 2.5 mm and Rolls are 7meter wide and length depending on the thickness of the geomembrane.
Irrigation Ponds, Canals, Reservoirs, & Ditches Animal Waste Containment Landfills & Canals Mining-Heap Leach & Slag Tailings Agricultural Applications Liners for Golf Courses & Decorative Ponds Municipal Applications Potable Water Reservoirs Aquaculture & Horticulture Tank Linings Liners & Covers Brine & Processed Water Applications Landfill Liners, Covers, & Caps Water & Wastewater Treatment & Containment Liquid Containment Industrial Applications Secondary Containment Environmental Containment Wastewater Lagoon Liners Soil Remediation
HDPE GEOMEMBRANE Liners allow for a controlled environment to minimize disease. The liner must not emit any harmful chemicals and in many cases, The liner must have excellent puncture and tear resistance. The liner must be fabricated and installed so that it is watertight as preventing seepage can be a major cost savings.
Municipal wastewater plants treat raw wastewater in a series of steps, during which large volumes of liquids in various stages are slowed down by water tank baffles, or held, sometimes for weeks. Some of these steps are intended to allow solids to settle – sometimes unaided, sometimes aided by treatment with bacteria while being exposed to circulating air (aeration). Geomembrane waste lagoon liners and concrete holding tank liners are frequently installed to insure waste doesn’t seep into the ground and ultimately enter the water supply. Cleaning out solids which have settled (sludge) can be hard in the liner, so it must be very abrasion, puncture and tear resistant.
Owing to our rich industry experience, we are enlisted among the trusted Manufacturers and Suppliers of HDPE Scrubbers in Andhra Pradesh. The HDPE Scrubbers offered by us is manufactured using quality-tested materials and advanced technology. In order to meet the bulk and urgent requirements of buyers, we maintain a large stock of HDPE Scrubbers at our state-of-the-art warehouse. Buyers can obtain the Scrubber at reasonable rates.
We are manufacturers of HDPE Spiral Scrubbers, PP scrubbers that are used for handling corrosive chemicals and for scrubbing various gases from the industry. Our ranges of products are widely used in various industries like chemicals, pharmaceuticals, dyes, intermediates, fertilizers and steel processing plants etc for various applications. Our range is in accordance with the set industry standards and made available at competitive market prices. These are also customized as per the specific requirements of our clients. These Sizes available in 300mm to 3000mm
Features
Decorative Pond Liners are to create bodies of water where Mother Nature did not provide one naturally. Flexible membrane liners used for decorative ponds have one function – simply to keep the water in place.
AYYAPPA GEOSYNTHETICS INSTALLERS capable of managing all fabrication for HDPE and PP pipe solution including the design, engineering certification, fabrication, construction, installation and commissioning.
We fabricate from install HDPE liners, and complete minor civil works. Works range from emergency repairs, shutdowns, and maintenance upgrades through to complete HDPE piping systems installations.
All welding for HDPE piping systems is performed in accordance with thoroughly developed quality standards, with all weld parameters calculated and recorded on weld logs and all worked performed in safety management system.
We use state of the art welding equipment which reduces manpower requirements on site and improves productivity.
AGI also carries a large range of pipe and fittings, including stubs, backing rings, reducers, bends, tee pieces, valves, gaskets and bolts – all available off the shelf – in sizes from 32mm to 630mm. This enables us to deal with our customers emergency needs promptly, avoiding costly delays.
APPLICATIONS
Welding of HDPE Pipes.
Floatation, Shifting and Sinking of Pipe Lines. Installation of Pipe Line on Sea Bed. Head works and generator installationsComplete pipeline welding and installationValve installationSTesting and commissioningOperate and maintenance
The ranges of varied dimensions of HDPE Welding Machines are like
315-630 mm
Municipal wastewater plants treat raw wastewater in a series of steps, during which large volumes of liquids in various stages are slowed down by water tank baffles, or held, sometimes for weeks. Some of these steps are intended to allow solids to settle – sometimes unaided, sometimes aided by treatment with bacteria while being exposed to circulating air (aeration). Geomembrane waste lagoon liners and concrete holding tank liners are frequently installed to insure waste doesn’t seep into the ground and ultimately enter the water supply. Cleaning out solids which have settled (sludge) can be hard in the liner, so it must be very abrasion, puncture and tear resistant.
Applications
Geotubes, used in hydraulic applications, can prevent the erosion of shorelines, and in some cases, restore lost shorelines as well. Geotubes can also be used to reclaim entire islands that are being lost, due to wave action from increased shipping traffic. In shoreline applications, Geotubes are typically installed with scour apron, which connects the large Geotube to a smaller anchor tube. After filling, the Geotube can then be covered with sand, rock, or spray on coatings. In offshore or underwater applications, the Geotube can be placed within a steel positioning frame, lowered to the required seabed or lakebed bottom location,  and then filled. In addition, design assistance is available to determine sizes, stresses, stacking arrangements,  and estimate dewatered volumes and pumping days. Features
Geotextile Fabrics is cloth which can be wrapped around drainage pipes for the purpose of keeping the drainage channels clear, whilst allowing water to escape. It is also widely used to control weed growth and to separate layers of different materials. The most common product in the family of Geosynthetics is non woven geotextile fabrics. This product is a random assembly of synthetic fibers, put together, which are mechanically & thermally bonded to make into a single layer, commonly made of non woven polypropylene geotextiles and polyester types. Geo textile fabrics are manufactured that based on typical application required. The weight range of this product in civil engineering applications are typically ranging from 100gsm to 2000gsm. Its main function is 1) Filtration 2) Separation 3) Reinforcement and 4) Drainage. Applications
AYYAPPA GEOSYNTHETICS INSTALLERS capable of managing all fabrication for HDPE and PP pipe solution including the design, engineering certification, fabrication, construction, installation and commissioning.
We fabricate from install HDPE liners, and complete minor civil works. Works range from emergency repairs, shutdowns, and maintenance upgrades through to complete HDPE piping systems installations.
All welding for HDPE piping systems is performed in accordance with thoroughly developed quality standards, with all weld parameters calculated and recorded on weld logs and all worked performed in safety management system.
We use state of the art welding equipment which reduces manpower requirements on site and improves productivity.
AGI also carries a large range of pipe and fittings, including stubs, backing rings, reducers, bends, tee pieces, valves, gaskets and bolts – all available off the shelf – in sizes from 32mm to 630mm. This enables us to deal with our customers emergency needs promptly, avoiding costly delays.
Applications
The Ranges of Varied Dimensions of Hdpe Welding Machines are Like
HDPE/PP Linning for Aquaculture PondsHDPE GEOMEMBRANE Liners allow for a controlled environment to minimize disease. The liner must not emit any harmful chemicals and in many cases, The liner must have excellent puncture and tear resistance. The liner must be fabricated and installed so that it is watertight as preventing seepage can be a major cost savings.
Applications
HDPE Linning for Etp TanksOur complete line of smooth and hdpe liners combine long-term durability with strength, flexibility, and ultraviolet and chemical resistance, to provide an impermeable barrier for a wide variety of applications. Applications for our products include solid and hazardous waste landfills, landfill closures, secondary containment, ponds, reservoirs, fish hatcheries, irrigation canals, wastewater treatment plants, and industrial waste lagoons etc.
Applications
HDPE Linning for Water Reservoirs/Ash PondsOur complete line of smooth geomembranes combines long-term durability with strength, flexibility, and ultraviolet and chemical resistance to provide an impermeable barrier for a wide variety of applications. Applications for our products include solid and hazardous waste landfills, landfill closures, secondary containment, ponds, reservoirs, fish hatcheries, irrigation canals, wastewater treatment plants, and industrial waste lagoons, etcThese products are offered in thicknesses of 0.5mm 1.0mm, 1.5mm, 2.0mm and 2.5 mm and Rolls are 7meter wide and length depending on the thickness of the geomembrane.
HDPE/PP Linning for Decoration PondsDecorative Pond Liners are to create bodies of water where Mother Nature did not provide one naturally. Flexible membrane liners used for decorative ponds have one function – simply to keep the water in place.
Applications
Contact us for excellent quality HDPE Chemical Storage Tanks at market-leading rates. We are an eminent Manufacturer and Supplier of HDPE Chemical Storage Tanks in Andhra Pradesh. The HDPE Chemical Storage Tanks are known for their long functional life and robust construction. Stringent quality-tests ensure that only flawless Chemical Storage Tanks reach the buyers. The entire range of the Chemical Storage Tanks is reasonably priced.
The unique SPIRAL manufacturing process produces a cylinder free of welded seams reducing the risk of leaks
Features
Our company has cemented its presence among the nonpareil Manufacturers and Suppliers of FRP Motor Guards in Andhra Pradesh. The FRP Motor Guards we make available safeguard the motors in a protective manner defending cases of failures and breakdowns. Our FRP Motor Guards are light in weight, easy to handle and corrosion resistant. The Guards offered by us are suitable for all kinds of industries are not affected by ultra violet rays of sunlight on prolong outdoor use.
Salient Features :
With FRP Motor Guards Motors Can Be Installed
FRP Motor Guards Protect Motors From
Additional Information:
Payment Terms : D/A
Delivery Time : 1-2 Weeks
AYYAPPA GEOSYNTHETICS INSTALLERS capable of managing all fabrication for HDPE and PP pipe solution including the design, engineering certification, fabrication, construction, installation and commissioning.
Prefabricated items in HDPE an PP will be fabricated as per your drawings and specifications.
Dimensional accuracy, long functional life and excellent quality make our HDPE Lined Agitators the preferred choice among buyers. We are a renowned Manufacturer and Supplier of HDPE Lined Agitators in Andhra Pradesh. The HDPE Lined Agitators we make available are manufactured in compliance with international quality standards and norms. Bulk orders of the Agitators are processed by us as per the specific requirements of buyers.
Our agitators are first manufactured in M.S. or SS and are then claded with HDPE or P.P depending on the application. Claded with premium grade HDPE or PP, these are also strictly tested for quality before dispatching to the clients We offer in different sizes and shapes and designs such as anchor type pedastral type these can be built as per client requirements