AZ STEEL ROOF is capable to produce the required Crimping.

• The curved, angle can be produced as per client requirement.


• The base material thickness will be from 0.30 to 0.60mm TCT.


• The zinc coating will be from Z90 to Z275.


• The temper is soft only i.e. min 250 mpa to max 350 mpa.


• The radius will be from 300 mm to 600 mm.

The crimped sheets are essential used for curved roofs as this crimped sheets are manufactured from normal trapezoidal profile sheet with required bending as per structure requirement.

This crimped sheets ensure joint less long bend sheets thus no chance of leakage from the bend portion.

Different types of Crimped profiled sheets were used

• Profile Ridge --Roof Cover


• Profile Canopy-- Gate Cover


• Profile NLC --Shade cover from Roof to Cladding


• Profile Curvature --Overlapping.

The different Crimping accessories were used at curved roofs, cover sheet on the window, etc.

Introduce Vichtory vent, zero electrical power consumption ventilator (exhaust fan). The turbine shaped Vichtory vent fan is a vertical mounted unit on the top of the roof of covered area from where the unwanted hot air is to be evacuated continuosly. Which circulates fresh air in the bottom layer of shed without any electricity. This can be fixed in any kind of roofing such as metal roofing, asbestos, frp, and other roofing categories

The normal environment of any workspace, factories, godowns, process house sheds, kitchens, in hotels, boiler houses, workshops etc., demands good ventilation for a healthy atmosphere Are the steel roofing is better suited to the Indian climatic conditions. This can be available with frp base, aluminium base and steel base.

Works efficiently within the normal available parameters of temperature, pressure and height of roof in most of the locations needing ventilation of polluted air.

As the air is heated or is warm it becomes lighter and fends to move upward. If it is made to escape from a single or multiple narrow openings from top, the hot air will escape at a faster pace causing a natural draft to exist at the opening. This draft is made use by the Vichtory vent to self driv the turbine causing the exhaust gases to be expelled at a faster rate. The rate of expulsion of gases is directly proportional to

1. Temperature if exhaust gases


2. Pressure within the room and flow of atmospheric air outside


3. Height of the roof of the room

1. Vichtory vent is cost effective as it consumes no power


2. It is light in weight, noiseless and environment friendly


3. In the long run Vichtory vent definitely adds to your profits


4. Its pay back period is extremely low


5. It is fully protected against corrosion


6. Once fitted, it has trouble free long working life with practically no maintenance

1. Speciality of vichtory vent is inbuilt with three internal wings to cut the hot air and push it out effectively in a large volume.


2. We provide 10 years performance warranty


3. For performing long life we use US 332 shield bearing

Louvers have become recognized as a sustainable way to cut down heating and cooling costs and are an effective system for controlling the climate in a building and guiding fresh air in while ushering stale air out. Contractors easily design louvers to fit into homes, commercial structures and industrial constructions and give customers several options to choose from when it comes to size, shape, building materials and finish. The material chosen to manufacture a louver should be considered just the same as the elements being used to build the rest of a structures framework. Besides its low cost, aluminum louvers have several advantages to think over that can benefit a building in numerous ways.

C Purlins are horizontal structures that are used to support the load from the roof deck or the sheathing. The plane surface of this purling on one side has made it a preferred material for cladding due to its easy installation on concrete structures or steel. Our range purlins are light in weight and perfect for simple span construction.

• Optimum quality


• Easy installation


• High tensile strength


• Abrasion & corrosion resistance

• Ability to span length


• Purlin erection is easier than others


• Fast to erect and easy handling


• No side drilling/cutting required


• Assured dimensions and straightness


• High durability, versatility and uniform quality


• Low transportation cost due to decreased weight


• Close tolerances on sectional sizes due to process of cold roll forming