Listing ID #1435431
Company Information
Ask for more detail from the seller
Contact SupplierFree Cutting and Low Carbon Steel Bright Bars are used for high speed machining in almost every industry such as fasteners,nuts, rivets, studs, bolts, screws , hoses and pipe joints, spark plugs, bicycle parts etc. We mainly use EN-1A, EN-A1[L], EN-8M, EN-32B, C-1010, C-1018 type of steels for these bright bars.
Type of Steel | C | Si | Mn | S | P | PB | UTS Kg./mm2 | Yield Strength Kg./mm2 | BHN | Elongation % |
---|---|---|---|---|---|---|---|---|---|---|
EN-1A | 0.07 0.15 | 0.10 | 0.80 1.20 | 0.20 0.30 | 0.07 | - | 60 | 28 | 174 | 25 |
EN-1A (L) | 0.07 0.15 | 0.10 | 0.80 1.20 | 0.20 0.30 | 0.07 | 0.15 | 60 | 30 | 160 | 22 |
EN-8M | 0.35 0.45 | 0.25 | 1.00 1.30 | 0.12 0.20 | 0.06 | - | 65 | 55 | 229 | 32 |
EN-32 M | 0.10 0.18 | 0.05 0.35 | 0.90 1.20 | 0.10 0.15 | 0.06 | - | 50 | 40 | 200 | 20 |
C-1010 | 0.08 0.13 | 0.10 | 0.30 0.60 | 0.05 | 0.04 | 46 | 38 | 131 | 16 | |
C-1018 | 0.16 0.20 | 0.10 0.20 | 0.30 0.60 | 0.05 | 0.04 | 50 | 40 | 148 | 15 | |
C15Mn75 | .10 .20 | - | 0.60 0.90 | 0.06 | 0.06 | 48 | 39 | 141 | 18 |