Other Products / Services #3834003

EP 300 is an un-pigmented two component, polyamide epoxy bonding agent. It is specifically designed for bonding new render or concrete to aged or old concrete substrates. It acts as a high strength bonding bridge between old and new concrete. EP 300 is a good bonding agent for tiles, bricks, concrete blocks, repairing potholes and spalled concrete etc.

A 3Screed ConcentrateA 37Screed CementA 384-hour Screed CementA 45Rapid Drying And Hardening Internal Repair MortarA 46Rapid Setting and Hardening External Repair MortarCL 11Commercial Levelling CompoundFH 20Medium Duty Non Metallic Floor HardenerFeather finishRapid Drying patching and Smoothing CompoundK 15Rapid Drying Self-Levelling Sub-Floor Smoothing CompoundK 80Rapid Drying Industrial Topping Wearing SurfaceK 301Fast Setting Resurfacing and Levelling Compound

R 24 CEEpoxy Self Levelling Screed R 25 CESelf-Smoothing Epoxy Floor System R 30 CEWater - Based Epoxy Coating R 35 CESolvent Free High Build Epoxy Coating R 33 CEEpoxy Coving Render R 34 CEEpoxy Coating for Potable Application R 41 CESolvent Based Epoxy Coating R 100 CEHeavy Duty Epoxy Floor Screed R 213 CEEpoxy Modified Cementitious Floor Screed R 625 CEAntistatic Epoxy

In recent past years, the protection of concrete floors has been a essential component especially in Industrial buildings. The main purpose, of course, is to provide protection to the slab from deterioration or contamination, and also not to overlook, to provide some added benefit such as, wear and tear, antiskid, chemical resistance, easy maintenance, physical performance, aesthetics etc. It is quite obvious that no other surface in a building takes more abuse than floors, regardless of the type of building, be it industrial or commercial or public. Floors usually experiences - impact, abrasion, chemical attack, and thermal shock. Concrete floors on its own, are not designed to take this continual abuse though they are considerably form a strong matrix. Cement being the main component of concrete floors, creates dust from wear and abuse. Cement concrete floors are also susceptible to abrasion and chemical attack. These are the very reason why concrete needs appropriate protection regardless of where it's located. The problem, in any given scenario, is to establish an appropriate recommendation of the protective system to suite different areas of application, different situations, different substrate conditions, different industries. Keeping all these points, ARDEX ENDURA has developed a wide range of floor coating systems

Two component system, high polymer modified adhesiveHigh performance flexible adhesiveSuitable for wood & metal surfaceHigh tensile strength

Effective cleaner for CP fittings & sanitary waresRemoves hard scaling which develops due to hardness of waterRemoves stubbon water stain marks & limescale with easeBased on surfactant to protect your chrome plated taps

Non-crackEasy mixing and applicationStrong adhesionInterior & exteriorA 802 is a specially formulated plaster toprovide a new and modern interior and exteriorapplication.A 802 is easy to work, without any additionalaggregates. Not only smooth surface but alsoprovides non- crack and thermal insulatingplaster.Suitable for thin and thick mortar (1.5 - 3mm)application. It is crack, dump, permeability andexcellent weather resistant. It has strongadhesion with a proper flexibility, able tocompensate the temperature difference stressbetween substrate and the outer coatings.

Improves the cohesiveness of concrete and cement mortarGood water reduction helps to improve durabilityImproves the concrete, cement mortar workabilityIt provides good surface finishReduced segregation helps to protect steel corrosionMinimized shrinkage crack in cement plaster and concreteMinimizes the permeability and increases the waterproofing properties of theconcrete and cement mortarComplies as per IS 2645-2003 Standards

A high quality fine, polymer-modified, water - resistant, cement - based powder grout designed for grouting glazed wall tiles, mosaics, vitrified & fully vitrified tiles, floor tiles, industrial floor tiles, etc (where chemical resistance, hygienic and sterile is important use ARDEX ENDURA EPOXY GROUT).Polymer modified groutGood compressive strengthAvailable in range of colours

Non stainingGranite, marble, sandstoneMetal frame, perimeter sealingVarious joint sealing of PC and RCAluminumExpansion joints in heavy and light prefabrication and traditional masonrySealing joints for facade panels, curtain walls, boarding, exterior wood finishingJoints between frame and preframe, between door frame and masonryAdheres on a majority of building supports: concrete, glass, anodizedaluminium, wood

To provide an easily cleaned surface, with excellent adhesion to concrete and cement sand screeds. Particularly suitable for floor applications in garages, warehouses, light industry and other areas subject to light vehicle and pedestrian traffic.

epoxy floor toppingA specialist applied, self-smoothing epoxy polyurethane resin floor finish combining outstanding wearing properties with chemical resistance and decorative properties. Ideally suited in areas where a seamless, joint free finish is required and maximum cleanliness is essential. Laboratories, clean rooms, and general light industry are just some of the environments that can benefit from this system.

Grey, polymer modified, cement-based tile adhesive, suitable for fixing tiles & natural stones in interior situations. For exterior applications and more difficult and demanding situations eg: vitrified tiles, glass mosaics, external cladding, swimming pools, etc. consult ARDEX ENDURA regarding use of a higher performance adhesive.

WPM 3000 X (Shelterseal 3000 X Self Adhesive Membrane) is a peel and stick bituminous asphalt membrane protected by a cross laminated high-density polyethylene film. WPM 3000 X is made from two structural components. Bitumenasphalt compound modified with SBS and high tack resins. This special compound has been formulated to make the product easy to install. The membrane can be adjusted should it initially be placed in the wrong position, as the adhesive on the sheet achieves final adhesion only after a few minutes.

CL 11 has been especially designed to produce a smooth, flat surface when applied to hard, rigid sub-floors such as sandcement screeds, concrete, etc. CL 11 contains high quality special cements and selected fillers so that, when mixed with water, a fluid easily trowelled mortar with free-flowing properties is produced. The mixed mortar can be applied up to a maximum thickness of 5mm in one application but will more normally be applied at 3 - 5 mm.

SU 10 is a single component, elastomer polyurethane sealant for expansion joints.Expansion joints in heavy and light prefabrication and traditional masonry, Sealing joints for facade panels, curtain walls, boarding, exterior wood finishing, Joints between frame and preframe, between door frame and masonry, Adheres on a majority of building supports: concrete, glass, anodized aluminium, wood.

WA G has luminous powder from rare earth, which can absorb ultraviolet, lamp light, sunlightand other visible lights in only 15 minutes, thengiving out light up to 2 hours. Glow in the darkfeature is characterized by their ability toabsorb store the energy of naturalartificiallights and to emit it in the form of visible lightin the dark.WA G is a three part system comprising of PARTA, PART B, and PART C for ease of application andthe ability to fill tilestone joints the grout is bestmixed to a smooth, creamy consistency.The cured grout does not permit the entryof bacteria or dirt and is easily maintainedin a sterile condition.

A premium, Solvented hybrid system with flurochemical technology, based sealer which bonds with tilestone for improved wear resistance. Penetrates into Nano pores, Effective on vitrified and Nano TilesIt provides a Enhanced wet look with maximum protection against the toughest oil & water based stains, wine, vinegar, pickle, sambar, coke, ink etc are the kind of stain it can resist, the low odour formula makes it easy to use with a durable Long-lasting 'Seal'. The sealed area provides a breathable surface in exteriors & interiors. It also allows moisture vapour transmission and inhibits the growth of mould.

White cement based wall putty Easy mixing and spreading, Better adhesion and durability, Compatable with all kind of paint and distemper, Compatable with all kind of paint and distemper.

A highly effective cleaner designed for everyday maintenance of tiles, marbles & natural stones etc. Ideally suitable as a general purpose cleaner. It is very much safe and less reactive (compared to other cleaners based on Hydrochloric acid) especially on marble surfaces. Designed specially for removal of limescale & for everyday maintenance of tiles, marbles, natural stones, etc. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, hotels, etc.Daily maintenanceGeneral purpose cleanerEffective against lime scalesMild enough to use on stones porous tilesAreas of Application

A highly effective cleaner designed for everyday maintenance of tiles, marbles & natural stones etc. Ideally suitable as a general purpose cleaner. It is very much safe and less reactive (compared to other cleaners based on Hydrochloric acid) especially on marble surfaces. Designed specially for removal of limescale & for everyday maintenance of tiles, marbles, natural stones, etc. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, hotels, etc.