Bapusaheb Kharade

Wagle Estate, Thane, Maharashtra

Air Atomizing Spray Nozzle mixes liquid & air to give fine mist like formation. In common situation, we can get super fine liquid spraying drops. Adjustable atomized nozzles can adjust liquid capacity and it can meet the requirement of spraying without changing air pressure and hydraulic pressure, therefore, it has good adaptability.

Features:With its multiple orifices, a volume of compressed air is converted into a high-speed stream with uniform distribution and good spray pattern.Low noise levels which are under OSHA standard.Low air consumption.Can be mounted side by side to produce an effective air curtain

We are offering Tank Washing Spray Nozzles to our privileged customers, manufactured as per the industry set parameters. These nozzles are used in applications of coating, gas cooling, conditioning, atomizing of viscous liquids and chemical process engineering.

Oil burner nozzles are available in semi hollow cone spray pattern. Micro-finish of tip & disc seats permitting flow only through the slots of the disc, plus extremely close manufacturing tolerances, ensure accurate capacity control.

Being a reckoned name, we are engaged in offering Stainless Steel Nozzles. These nozzles can be used to cater to the diversified needs of continuous casting cooling.

Tank Washing Spray Ball is Suitable for washing of thick kind of materials. Having multiple spray tips on peripheri which can provides upto 360 Degree. of spray coverage.

The Turbo Cleaning Spray Ball are generally used for washing of industrial storage tanks small barrels and used in the dairy, chemical, pharmaceutical, food industries and process industries. The rotating Disc dispense an instant powerful dense spray to all the interior surface of the vessels.

Static Spray Ball has very compact design that provides straight jets for high impact rinsing of small drums or container up to 1.5m. Also it can be used with saturated steam.

HIGH PRESSURE TANK CLEANING NOZZLESBy the term high-pressure tank cleaning nozzles, we mean cleaning devices whose operating pressure exceeds 35 bar. Thanks to the high impact force of the jets, the high-pressure spray balls use on average less liquid for cleaning than the lower pressures tank washing heads.

Self-powered rotating Gyro Jet Tank Washing Spray Ball used for cleaning large and medium size diameter tanks. Efficient cleaning action for medium and large size tanks.

Very uniform, parabolic distribution of liquid. Rectangular distribution pattern on request. Headers, equipped with these nozzles, show a highly uniform total distribution installation heights and centers. Application : Cleaning plants, spray headers, cooling pipes, connection to pipe by means of screwed nut and nipple. The ideal nozzle position is always secured with the aid of the dove- tail fixing. The flat is pre-set at 5 Degreeto the tube axis

Flat Spray Nozzles are designed for high pressure / high impact washing application. These nozzles are specially designed and machined with precision which allows even spray coverage and distribution.Flat spray nozzles are available in all steel grades, Plastics other alloys.

Spraytech offer offer a full range of sand filter / gravity filter nozzles for water treatment plants, swimming pool filter systems, steel works and for potable water. We offer a choice of Nozzle types Slot sizes Thread stem bore Stem length Fitting accessories.

The nozzle has two parts: mainly filter & stem. The filter usually has slots for restricting the resin or gravel from passing through along with the water. The flow through nozzle is decided based on the number of slots, slot width & length. The filter nozzle is generally fitted to the underdrain bed with the threaded stem inserted in to the holes where it will be bolted to the plate with washers & nuts.

This filter is for pressurized liquid, gas, filtration. The filter bags are extremely durable and available in various needle felts.

FeaturesWedge wire designSMP france STR designStampings designFour compartments - auto wash design Manual / Motorized. These filters are used for water, oil, Pulp, grease applications, element is provided with backwash arm.When element gets chocked, diff.Pressure switch across the inlet / outlet gives a signal to the motor drain gets opened simultaneously

Other Details: External mix: allows spraying of viscous materialsVariable atomizationPrecise metering of the liquid flows rateFlow Rates and DimensionsSiphon-fed, External Mix, Flat Spray Pattern, 1/8" and 1/4" Pipe Sizes, BSP or NPT

Spray techs RMG Spray Nozzles are designed for Large Scale, Medium Scale and Lab Scale Rapid Mixer Granulator and High - Shear Granulator for Wet Granulation.

We are offering T Strainers to our profound customers, manufactured as per the approved industry norms.

Being a reckoned name, we are engaged in offering Hollow Cone Spray Plastic Nozzles. These products are used widely in aeration, dust suppression, filter cleaning, and other applications.

DESIGN : Wafer, Flanged (BS:5155) VALVE SIZE : 50 to 600mm (2" to 24") BODY TYPE : Double Offset, Centric. RATING : PN 10, PN 16, ASA 150 (Other On Request) BODY MATERIAL : Carbon Steel, Stainless Steel, Tefon Lined etc. VANE MATERIAL : Stainless Steel (Other On Request) FLOW CHARA. : On-Off / Throtting SEAT LEAKAGE : VI (FCI-70.20). GLAND PACKING : PTFE V Ring, Grafoil (As Per Temperature). ACTUATOR : Diaphragm, Rotary & Electrical Actuator

Flow control valves are used in pneumatic systems to regulate the flow rate of compressed air. By controlling the flow rate, the speed of the pneumatic cylinder can also be regulated directly. In addition, a good throttling valve contributes to reducing wear due to a lower kinetic load.

DESIGN : ASME B16.34 VALVE SIZE : 1/2" to 14" (15 to 300mm) BODY FORM : Globe 3 Way Port With Tail Piece RATING : 150# to 2500# ANSI (Other Rating Available On Request) MATERIAL : Flanged, Screwed, Buttweld, Socketweld MATERIAL : Carbon steel, Stainless Steel, Alloy Steel, Tefon lined etc. (Other Material Available On Request) BONNET : Standard, Extended Finned, Bellow Sealed. TRIM FORMS : Skirt guided, Trim with soft seated, Multihole plug trims. FLOW : Mixing And Diverting. FLOW CHARA. : Liner, On/Off SEAT LEAKAGE : Class III, IV, V, & VI (FCI-70.2) Standard Leakage Rates. Metal to Metal Seating Class IV-less than 0.01% of rated Cv. Metal to soft Seating Class VI-Bubble tight (Zero Leakage). GLAND PACKING : Grafoil or PTFE (As per Temperature) ACTUATOR : Pneumatic Diaphragm, Piston or Electrical. ACCESSORIES : Pneumatic Positioner, Electro Pneumatic Positioner, Limit Switch, SOV, Air lock relay, Volume Booster, AFR, Position Transmitter