Post Buy Requirement

BF

BEDA Flow Systems Pvt. Ltd.

Noida, Uttar Pradesh, India

Add Review

Our Products

Industrial Pump 3 Products available
Coupling 6 Products available
Kitchen Container 3 Products available
Domestic Fans, AC & Coolers 3 Products available
Others 17 Products available

Other Products / Services #5406294

Electronic Pressure Switch

Electronic Pressure Switch

SUCO offers a wide range of electronic pressure switches, which are available as normally open (NO) or normally closed (NC) versions. An electronic pressure switch converts the medium pressure which is present at the measuring cell into a digital, electrical switch signal (ONOFF). An electronic pressure switch is more complex than a mechanical pressure switch, and thus generally more expensive. As an electronic pressure switch has no moving parts (relative to each other), it usually has a much prolonged service life and provides a higher level of precision (depending on application). The hysteresis can be set over a wide range and virtually independently of the switching point. Electronic pressure switches can also be equipped with additional functions, such as optical displays and menu control.

View Complete Details

Ask Latest Price & Details

phe pump

Phe Pump

The heating surface of the DOC Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled, The sturdy connection blocks allow high fastening torques for assembling.

View Complete Details

Ask Latest Price & Details

Flow plate

Flow Plate

The heating surface of the DOC Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled

View Complete Details

Ask Latest Price & Details

bell housing

Bell Housing

HBE Bellhousings function as connection elements between IEC electric and petrol motors and hydraulic pumps. They are available for nearly all hydraulic pumps and in all sizes ex stock at short times. Users can choose between a rigid (form A) and a noise absorbing model (form B) according to VDMA 24561. The standard versions are made of aluminium, but are also available in steel and stainless steel.

View Complete Details

Ask Latest Price & Details

Aluminium foot brackets

Aluminium Foot Brackets

HBE aluminium foot brackets are suitable for the horizontal installation of motor, bellhousing and pump and allow a separate assemblydisassembly of motor and pump. The series PTFL is a lightweight and space saving construction, the series PTFS has been designed as a heavy line especially for multiple pumps.

View Complete Details

Ask Latest Price & Details

Turbine Flow Meter

Turbine Flow Meter

Flow range 110 l/h up to 4, 500 m³/h
Temperature range – 40°C up to +120°C

Turbine flow meter, Turbine flow meters are precise and reliable measuring equipment, designed for varied applications. Basically, the VTR series consists of a rotor, the housing and the measurement pick-up. As a result of the specific inner diameter, the turbines revolutions are directly proportional to the flow. VTR flow meters can be installed even under the harshest application conditions including oil, petrochemical and chemical industries as well as other industrial sectors. All VTR flow meters are individually calibrated.

View Complete Details

Ask Latest Price & Details

Tube Bundle

Tube Bundle

Tube bundle, HBE Tube bundle heat exchangers allow heat exchange performances of up to 1, 000 kW with pressures of up to 35 bar (oil) resp. 10 bar (water). They are economically priced and space-saving.

View Complete Details

Ask Latest Price & Details

Delivery Pumps

Beinlich delivery pumps are nearly wear-free due to the use of high-performance materials like nitrided steel or spheroidal cast iron. Thus, the pumps not only have minimal maintenance requirements, but also a long service life.

View Complete Details

Ask Latest Price & Details

Delivery Pump Units

Beinlich self-priming delivery pump units consist of external gear pumps which are made from standard materials 0.7050 (housing) 1.8550 (shafts and gears) and FKM (static seals).

View Complete Details

Ask Latest Price & Details

Agitator Drives

Complementing to the range of product offerings including permanent magnetic couplings, canisters, SSIC ceramic plain bearings and the patented BOROHARDCAN, DST also provides agitator drives made from stainless steel 1.4435 1.4404.

View Complete Details

Ask Latest Price & Details

Plain Bearings

Predominantly for use in centrifugal pumps, DST produces complete SSIC Ceramic plain bearings. The bearings are available as axial and radial types and can be combined with the DST standard permanent magnetic couplings.

View Complete Details

Ask Latest Price & Details

Steel Oil Tanks

The ready to install HBE steel oil tanks are manufactured from the material S235JR (St37) and are sandblasted and coated both from the inside and outside the tank. That is why the tanks are resistant against hydraulic oil on mineral oil base and low-flammable fluids.

View Complete Details

Ask Latest Price & Details

Aluminium Oil Tanks

The HBE aluminium oil tanks with an all-round fluting are characterised by a good heat dissipation. The stable casted bodies are stackable in all tank sizes, which leads to low freight costs and a space saving storage.

View Complete Details

Ask Latest Price & Details

Aluminium Cleaning Covers

HBE aluminium cleaning covers are available with form gasket as well as with O-ring gasket. Cleaning covers of series RD 250-4 and RD 250235 are especially suitable for steel oil tanks of low size.

View Complete Details

Ask Latest Price & Details

Level Indicators

HBE produces different oil gauges and level switches for level indication. The various products are especially suitable for mineral oils, diesel or benzene and for a minimum temperature range of -15C up to +80C.

View Complete Details

Ask Latest Price & Details

Incorporators

We are well known for supplying of wide variety of Incorporators.

View Complete Details

Ask Latest Price & Details

Tank Heaters

HBE tank heaters are suitable for preheating of hydraulic oil on mineral basis and for quickly achieving the operating temperature at hydraulic units. An optimum viscosity reduces the wear of the hydraulic components.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

BEDA (BEDA Flow Systems Pvt. Ltd.)
W-7, Sector-11 Noida, Sector 11, Uttar Pradesh - 201301, India
Share us via

View Contact No.

List of Other Products by BEDA Flow Systems Pvt. Ltd. from Noida, Uttar Pradesh.

Post Buy Requirement

BF

BEDA Flow Systems Pvt. Ltd.

Noida, Uttar Pradesh, India

Add Review

Our Products

Industrial Pump 3 Products available
Coupling 6 Products available
Kitchen Container 3 Products available
Domestic Fans, AC & Coolers 3 Products available
Others 17 Products available

Other Products / Services #5406294

Electronic Pressure Switch

Electronic Pressure Switch

SUCO offers a wide range of electronic pressure switches, which are available as normally open (NO) or normally closed (NC) versions. An electronic pressure switch converts the medium pressure which is present at the measuring cell into a digital, electrical switch signal (ONOFF). An electronic pressure switch is more complex than a mechanical pressure switch, and thus generally more expensive. As an electronic pressure switch has no moving parts (relative to each other), it usually has a much prolonged service life and provides a higher level of precision (depending on application). The hysteresis can be set over a wide range and virtually independently of the switching point. Electronic pressure switches can also be equipped with additional functions, such as optical displays and menu control.

View Complete Details

Ask Latest Price & Details

phe pump

Phe Pump

The heating surface of the DOC Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled, The sturdy connection blocks allow high fastening torques for assembling.

View Complete Details

Ask Latest Price & Details

Flow plate

Flow Plate

The heating surface of the DOC Brazed Plate Heat Exchanger consists of thin corrugated metal plates stacked on top of each other. Channels are formed between the plates and corner ports are arranged so that the two media flow through alternate channels, normally in full counter-current flow. The media are kept in the unit by a brazed seal around the edge of the plates. The contact points of the plates are also brazed to withstand the pressure of the media handled

View Complete Details

Ask Latest Price & Details

bell housing

Bell Housing

HBE Bellhousings function as connection elements between IEC electric and petrol motors and hydraulic pumps. They are available for nearly all hydraulic pumps and in all sizes ex stock at short times. Users can choose between a rigid (form A) and a noise absorbing model (form B) according to VDMA 24561. The standard versions are made of aluminium, but are also available in steel and stainless steel.

View Complete Details

Ask Latest Price & Details

Aluminium foot brackets

Aluminium Foot Brackets

HBE aluminium foot brackets are suitable for the horizontal installation of motor, bellhousing and pump and allow a separate assemblydisassembly of motor and pump. The series PTFL is a lightweight and space saving construction, the series PTFS has been designed as a heavy line especially for multiple pumps.

View Complete Details

Ask Latest Price & Details

Turbine Flow Meter

Turbine Flow Meter

Flow range 110 l/h up to 4, 500 m³/h
Temperature range – 40°C up to +120°C

Turbine flow meter, Turbine flow meters are precise and reliable measuring equipment, designed for varied applications. Basically, the VTR series consists of a rotor, the housing and the measurement pick-up. As a result of the specific inner diameter, the turbines revolutions are directly proportional to the flow. VTR flow meters can be installed even under the harshest application conditions including oil, petrochemical and chemical industries as well as other industrial sectors. All VTR flow meters are individually calibrated.

View Complete Details

Ask Latest Price & Details

Tube Bundle

Tube Bundle

Tube bundle, HBE Tube bundle heat exchangers allow heat exchange performances of up to 1, 000 kW with pressures of up to 35 bar (oil) resp. 10 bar (water). They are economically priced and space-saving.

View Complete Details

Ask Latest Price & Details

Delivery Pumps

Beinlich delivery pumps are nearly wear-free due to the use of high-performance materials like nitrided steel or spheroidal cast iron. Thus, the pumps not only have minimal maintenance requirements, but also a long service life.

View Complete Details

Ask Latest Price & Details

Delivery Pump Units

Beinlich self-priming delivery pump units consist of external gear pumps which are made from standard materials 0.7050 (housing) 1.8550 (shafts and gears) and FKM (static seals).

View Complete Details

Ask Latest Price & Details

Agitator Drives

Complementing to the range of product offerings including permanent magnetic couplings, canisters, SSIC ceramic plain bearings and the patented BOROHARDCAN, DST also provides agitator drives made from stainless steel 1.4435 1.4404.

View Complete Details

Ask Latest Price & Details

Plain Bearings

Predominantly for use in centrifugal pumps, DST produces complete SSIC Ceramic plain bearings. The bearings are available as axial and radial types and can be combined with the DST standard permanent magnetic couplings.

View Complete Details

Ask Latest Price & Details

Steel Oil Tanks

The ready to install HBE steel oil tanks are manufactured from the material S235JR (St37) and are sandblasted and coated both from the inside and outside the tank. That is why the tanks are resistant against hydraulic oil on mineral oil base and low-flammable fluids.

View Complete Details

Ask Latest Price & Details

Aluminium Oil Tanks

The HBE aluminium oil tanks with an all-round fluting are characterised by a good heat dissipation. The stable casted bodies are stackable in all tank sizes, which leads to low freight costs and a space saving storage.

View Complete Details

Ask Latest Price & Details

Aluminium Cleaning Covers

HBE aluminium cleaning covers are available with form gasket as well as with O-ring gasket. Cleaning covers of series RD 250-4 and RD 250235 are especially suitable for steel oil tanks of low size.

View Complete Details

Ask Latest Price & Details

Level Indicators

HBE produces different oil gauges and level switches for level indication. The various products are especially suitable for mineral oils, diesel or benzene and for a minimum temperature range of -15C up to +80C.

View Complete Details

Ask Latest Price & Details

Incorporators

We are well known for supplying of wide variety of Incorporators.

View Complete Details

Ask Latest Price & Details

Tank Heaters

HBE tank heaters are suitable for preheating of hydraulic oil on mineral basis and for quickly achieving the operating temperature at hydraulic units. An optimum viscosity reduces the wear of the hydraulic components.

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

BEDA (BEDA Flow Systems Pvt. Ltd.)
W-7, Sector-11 Noida, Sector 11, Uttar Pradesh - 201301, India
Share us via

View Contact No.