Other Products / Services #3035998

Extra large design of die holder can produce 4 pairsstation in the same time, which increasing the productivity a lot.The erro between tow mold can be automatic compensated.The injection oil hydraulic system adopts the proportional flow, pressure control valve.The injection part controlled by 5-stage PID, can achieve the setting temperature fast and steadily to insure the high quality of finished products.It adopts the function of auto diagnosis and maintain to operate the monitor system and insure you know the machine's working condition.Machine is controlled by the touch screen PLC.

This unit uses the combined mould with blade or ally steel blade to directly cut the voltage material at the blade position of the mould through the oil pressure system, following the completion of the high frequency voltage program. Thus, it can reduce the rejected products caused by cutter's additional cut off after the high frequency and greatly improve the production efficiency. This machine is most applicable for cutting and procession the voltage of high accuracy trademarks, vamps and watchbands.

This machine is a special equipment for cutting leather, artificial leather, cloth, rubber plate, plastics plate, paper sheet etc. and can finish cutting several strips at a time. It is especially suitable to footwear, leather etc. Industries for cutting braids and binding strips.

Extra large design of die holder can produce 4 pairsstation in the same time, which increasing the productivity a lot.The injection oil hydraulic system adopts the proportional flow, pressure control valve.The injection part controlled by 5-stage PID, can achieve the setting temperature fast and steadily to insure the high quality of finished products.It adopts the function of auto diagnosis and maintain to operate the monitor system and insure you know the machine's working condition.

This machine is used to produce various kinds of one color soles, slippers, sandals, short-height boots and it is special for produce shoes and leisure shoes in all plastic.It is suitable for all kinds of thermoplastic raw materials, foaming or non-foaming, such as PVC, TPR, PCU etc.The well-interconnected oil circuit by electric control can reduce waiting time, quicken production rate and promote productivity.Air blowing system device with air release function of mould makes the products lightweight, soft with glosss surface and high value.Injection pressure and speed of each station can be controlled individually according to different materials and molds by PLC and touch-screen system; It can use different moulds at the same machine. It saves the time of mould-change and extends the cooling time.

Heavy Duty Precision Model.Easy operation and simple control.Closed ink cup system.Avoiding continuous addition of solvent.Stable Ink viscosity and less solvent evaporation.Less ink Requirement.High Quality Registration on Impression to Impression.Cost effective.

Maximum width of plain skiving is 20 mm; the designated width could be obtained by Skiving some more times.Suitable for edge skiving of any kind of leather as well as vinyl and rubber for shoes, bags belts, gloves, wallets, etc.

This machine adopts the insole wedging and skiving and cutting, so as to allow the insole to fit in.This machine adopts the linear-type horizontal feeding, no adjustment is needed for any material with a thickness of 0.75-4mm for wedging thickness.The insoles after skater skiving and cutting by this machine have the consistency of 100% in thickness and length, therefore the quality of insole is ensured, and the insoles after skiving and cutting are lined up in order through the auxiliary line ad are counted accurately through the electronic device.

The use of fully automatic machine with hydraulic design, high pressure, and reach perfect attaching effect.It could automatically sides way positioning. It makes shoes was easy put and take out. And won't damage to shoes upper. Whatever short boot or long boot, could has perfect attaching effect.The biggest feature of this aircraft is floating design. By 16 pcs small hydraulic cylinder control design that could adjust the attaching position according different outsole. Makes shoes attaching outsole more closer.Outsole pressing, side compressing and the toe and heel compressing are finish at one time. Also could be finish individually. The other attaching machine without this function.

Fully auto-controllable CPU, Fully show on LCD display;Auto tape cutting system, sealing trail orderly;Auto tape feeding device and Tension Regulator, assure the tape feeding smooth, prevents feeding over tight or loose;Auto controllable temperature, max temperature up to 780C;Setting cooling system outside of hot air pipe;Hot air pipe and heater are protected by inner super-statics wind machine, prolong the using life;

This machine is a special equipment for cutting leather, artificial leather, cloth, rubber plate, plastics plate, paper sheet etc. and can finish cutting several strips at a time. It is especially suitable to footwear, leather etc. Industries for cutting braids and binding strips.

The machine is suitable for plane gluing which thickness over than 1.5mm, such as footwear, leather case, leather wear, stationery, cardboard box, sporting goods etc. 2. Innovated design of upper roller base can floating up & down and with pressure adjusting for material gluing which surface with uneven, soften, hard and slope status. 3. The hot melt adhesive stand with teflon treated for change adhesive easily. It can be adjusted temperature according to the feature of hot melt adhesive so that, to avoid the hot malt adhesive carbonized defectively. 4. The machine equipped with thermostat device to avoid motor trouble, moreover, it equipped with a exhaust fan to blow out the odor gas. 4. The driving motor is controlled by inverter, so that, the PPM can be variable adjusted.

This machine which can paste strong glue onto the edge and surface of leather. Zipper, Suitcase, Bag, Mid-sole etc. This machine apply automatic circulating system and air-tight design, so prevent the strong glue from precipitation and polarization the thickness and the evenness of glue can be adjusted arbitrarily, the width of glued part on the edge controlled by material guider and there for it is even. The revolving, cylinder can make the sole, mid -sole and other processing material with round edge revolve automatically, so can auto martially paste glue by circumference or semi-circumference.

LZ leather pressing machine has the feature of roller and belt design, and it is used to iron and smoothen every kind of leather with rumple, as well as bond patch leather or liner this machine has two pressing rollers (upper and lower rollers) instead of the original one pressing roller, So Improve the working efficiency. This machine is designed with a stepless speed regulator and the temperature of roller is controlled by a temperature.

The outside edge of heel and vamp can be made with inward fold moulding and normal heel moulding. 2. It's Suitable for moulding of toe puffs made of different materials. 3. It has models with sweeping knife and adjustable vamp function. 4. The last can be tiled for easier operation. 5. The temperature of inner and outer moulds can be regulated automatically according to different materials. 6. The inner and outer moulds are made based on the last of customers, which will head to a perfect appearance. 7. The projection lamp can provide a more accurate moulding position. 8. The adjustable clamp will achieve 100% jointing of vamp with last. 9. The adoption of environment-friendly freezing system features high speed and good result with freezing temperature up to -30o C. 10. After moulding, the linder, rubber sheet and vamp are closely jointed without crinking deformation and bubbling.

Used for reviting of leather belt, shoe upper and various kinds of leather articles.Eyelet Face Diameter 6-15 mmEyelet Diameter 3-5 mmEyelet Length 3-12 mmThroat Depth 130 mmMotor 12 HPDimensions (L*W*H) 550*590*1430 mmN.W. 160 kg.G.W. 220 kg.

This machine is used to produce various kinds of one color soles, slippers, sandals, short-height boots and it is special for produce shoes and leisure shoes in all plastic.It is suitable for all kinds of thermoplastic raw materials, foaming or non-foaming, such as PVC, TPR, PCU etc.The well-interconnected oil circuit by electric control can reduce waiting time, quicken production rate and promote productivity.

1 Applied with the newly improved device. so increased the function & strength & durability, and simplified the maintanance. 2 Walking foot and feed dog make uniform and beautiful stitches to be obrained.3 Open type of top cover specified the maintanance.4 Applied with large hook ensures high sewing efficiency.5 Suitable for stitching the small-curved portions & their demensional articles, such as the cylinder materials, shoes, handbag and leather products etc.

The machine is applicable to continuous operation of nonmetal rolled materials of same specifications and large batches by die cutter. It can be used in such industries as sports articles, abrasives and abrasive tools, medial equipment, clothing, shoes, caps, cultural articles, etc.The servo motor is adopted to control the horizontal movement of cutting head and the multi layer materials are cutting of materials and the displacement distance of cutting head and feeding length can be accurately set on the human-machine interface, which has solved the problem of inaccurate materials layering and length during the feeding of multi layer materials.