Klassic Klarol #1149874

Klarol is a New Concept in Oil Cleaning Systems. It Has Been Designed Keeping in Mind the Limitations of the Normal Full Flow and By Pass Oil Filters. Its Ability to Remove Solid Contaminants Down to One Micron and Liquid Contaminants, like Lighter Fractions of Un-burnt Fuel and Water from the Engine Oil While the Oil is Still in Use Helps to Protect the Essential Additives and Chemicals of the Oil. An Engine Oil Which is Free from Harmful Contaminants and Has Its Useful Additives Over the Minimum Prescribed Limit Can Be Used for a Very Long Time. engine Oil Cleaning Systems klarol - Unique Features: it is a By Pass System with No Moving Parts. It Can Be Easily Installed On Any Engine Without Causing Any Alteration to the Engine. engine Oil Pressure is Utilized to Supply Oil to the Bottom of this Purifier. this Pressure Further Helps the Oil to Travel all the Way Through It. the Oil Then Goes Back to the Engine By Its Own Gravity. it Can Take Out Solid Contaminants Till One Micron in Its Cellulose Filter Cartridge, Which is the First Stage of Filtration. this Filter Cartridge is Replaceable and Has to Be Changed After a Certain Number of Miles or Hours. Klarol Filter Cartridge Can Be Recycled. It Does Not Cause Pollution.it Can also Take Out Liquid Contaminants like Water and Lower Fractions of Fuel in Its Evaporation Chamber. this Purification of Engine Oil in the Engine Itself Helps to Increase Its Life By More Than Ten Times. technical Feasibility: lubrication Experts Agree that Oil Does Not Wear Out or Break Down, It Can Be Used Indefinitely as Long as It is Kept Clean. Unfortunately the Engine's Normal Full Flow Oil Filter or By Pass Oil Filters have Their Limitations in Removing the Contaminants Which Mix in the Oil While It is in Use. this Results in the Necessity of Interval Oil Changes. klarol is a New Concept in Oil Cleaning. It Has Been Designed Keeping in Mind the Limitations of the Normal Full Flow and By Pass Oil Filters. Its Ability to Remove Solid Contaminants Down to One Micron and Liquid Contaminants, like Lighter Fractions of Un-burnt Fuel and Water from the Engine Oil While the Oil is Still in Use Helps to Protect the Essential Additives and Chemicals of the Oil. An Engine Oil Which is Free from Harmful Contaminants and Has Its Useful Additives Over the Minimum Prescribed Limit Can Be Used for a Very Long Time.

Klarol Coc-2 Mobile Machine this Machine is Designed to Remove Solid Contamination, Sludge, Varnish and Lacquer in By Its Surface Filters Installed in Series and By Two Klarol Depth Filters. Water Can Be Absorbed By Klarol Depth Filters if the Medium is Changed from Fiber Glass to Cellulos

Klarol - Unique Features: Klarol Oil Cleaning System Can Remove Contamination Down to Less Than One Micron, Water, Air & Gases and Lower Oxidised Molecules of Oil from Hydraulic Oils. Klarol Can Be Installed Permanently On Any Hydraulic Power-pack as a By-pass Oil Cleaning Unit. It Can Be Installed with a Pressure Reducing Valve Taking Oil Inlet from the High Pressure Machine Oil Circuit or It Can Be Installed with a Separate Pump/motor to Take Out Oil from the Parent Tank. Klarol Can also Be Used as a Mobile Machine to Clean Oil in a Number of Machines. Klarol Mobile Machines are Fitted with Pump / Motor, Pre-heater, Vacuum Pump Etc to Clean Oil in the Parent Machine Oil Tank or Outside It in Drums or other Reservoirs. Technical Feasibility Machines Already have Filters. Why Do We Need the Klarol Oil Cleaning System for Cleaning Hydraulic Oils ? Machine Filters Cannot Stop Oil Degradation By Protecting Its Additives. Machine Filters Cannot Remove Trapped Air from Oil. in Hydraulic Systems, Entrained Air Produces Sponginess and Loss of Precision Control Due to the Airs Compressibility. Machine Filters Cannot Remove Moisture. Water Causes Foaming in Oils and Reduces Component Life. It Increases the Rate of Oxidation of the Base Oil. Machine Filters Cannot Remove Oxidised Lighter Weight Molecules of Oil. Further Oxidation of These Initial By-products of Oxidation Causes Formation of Sludge, Varnish and Lacquer. Machine Filters Cannot Remove Sludge, Varnish and Lacquer from Oils. Once Formed, Varnish Deposits On Servo, Proportional and other Tight-clearance Hydraulic Valves Result in Sticking, Which Can Slow or Stop Operation. Machine Filters Cannot Remove Contamination Less Than 10 Microns Whereas Some Critical Components in Hydraulic Systems have Clearances Between 0.5 Microns to 4 Microns.

Klarol Turbine Oil Purification Systems are Being Successfully Used By Companies like Jaypee Hydropower Project in Joshimath, Indo Gulf Fertilizers, Jagdishpur, Daurala Sugar Mills and Many More Turbine Users. in Indo Gulf Fertilizers, Klarol Oil Purifying System Installed On a 22000 Litres Turbine Oil Tank Helped to Increase Turbine Filter Life By Removing Varnish Formed in the Oil and Stopping Its Further Formation By Removing Emulsified Water and Releasing the Gas Ammonia from the Oil. Similarly in Jaypee Hydropower Klarol Could Clean the Oil Down to Nas 4, Removing Contamination and Emulsified Water Down to Less Than 50 Ppm, Ensuring that There Was No Valve Sticking Problem in Their Governing System. Both These Companies Were Unable to Achieve These Results with the Use of a Centrifuge.