BHAVANI STEEL FORGING INDUSTRIES

Vavdi, Rajkot, Gujarat

A Carbon Steel Threaded Plug is a type of pipe fitting used to close the end of a threaded pipe or fitting. It is designed to create a secure and leak-proof seal in a threaded opening. Threaded plugs are often used in various piping systems and equipment where temporary or permanent closure of a threaded connection is required.

A mild Steel Socket Weld Tee is a type of pipe fitting used to create a T-shaped connection in a piping system. It allows for the diversion of flow in three directions, typically at 90-degree angles. This tee is specifically designed to be joined to pipes using socket welding, which provides a strong and leak-resistant connection.

A Threaded Carbon Steel Tee is a pipe fitting that allows for a T-shaped connection in a piping system. It has female threaded ends, which means it can be connected to pipes or fittings with male threaded ends. This type of tee is joined by simply screwing it onto the threaded pipes or fittings, providing a secure connection.

A Carbon Steel 45 Degree Threaded Socket Weld Elbow is a type of pipe fitting designed to change the direction of flow in a piping system at a 45-degree angle. It is constructed from carbon steel, which is known for its strength, durability, and resistance to corrosion, making it suitable for various industrial applications.

A Carbon Steel 90 Degree Threaded Socket Weld Elbow is a type of pipe fitting used to change the direction of the flow in a piping system. It is designed to connect two pieces of pipe at a 90-degree angle, allowing fluid or gas to change direction smoothly. The term "Carbon Steel" indicates that the elbow is made from carbon steel material, which is known for its strength, durability, and resistance to corrosion.

The Mild steel weld elbows are used to change the direction of the pipe in different angles. There are long radius and short radius elbows depending on the bending radius of them

A Carbon Steel 45 Degree Socket Weld Elbow, also known as a Socket Weld 45° Elbow, is a type of pipe fitting used to change the direction of flow in a piping system at a 45-degree angle. It is designed to connect two pipes with socket weld ends, creating a strong and leak-resistant joint. The 45-degree angle allows for a moderate change in the flow direction, making it ideal for redirecting pipelines around obstacles or corners smoothly.

A round bar is a cylindrical solid metal bar with a circular cross-section. It is one of the most common and versatile forms of raw material used in various industries and applications. Round bars are manufactured in a wide range of sizes, materials, and grades to suit different requirements.

Mild steel round bars are solid cylindrical bars made of mild steel, known for their versatility, strength, and easy machinability. They come in various diameters and lengths, suitable for a wide range of applications in construction, manufacturing, and engineering. Mild steel round bars are often used in frameworks, supports, shafts, and general fabrication due to their durability and cost-effectiveness.

Forged pipe fittings are components used to connect nominal bore schedule pipes and pipelines in the forging industry. They are manufactured according to different standards and specifications, such as ASME B16.11, MSS-SP-79/89/95/97, and BS3799. The most common types of forged pipe fittings are socket weld and threaded fittings, which are made of carbon steel or stainless steel.

Round bars are cylindrical metal rods that are commonly used in various industrial applications. These bars are available in different sizes, lengths, and materials, including stainless steel, carbon steel, aluminum, and brass. Round bars are versatile and can be used for a wide range of applications, including construction, manufacturing, automotive, and engineering. They can be easily machined, welded, and cut to fit specific requirements. Round bars are known for their strength, durability, and resistance to corrosion, making them an ideal choice for outdoor and high-stress applications. They are also used as shafts, axles, and dowels in various machines and equipment.

According to ASME B16.11, MSS-SP-79839597, and BS3799 standards and specifications, forged pipe fittings are offered. For joining pipes with nominal bores, these fittings are helpful. They are made of stainless steel SS316 and carbon steel A105.

  Coupling is a type of fitting used to connect two pipes together. It provides a short and seamless connection between two pipes of the same diameter. Forged couplings are manufactured through the forging process, which involves shaping metal using compressive forces, resulting in a strong and durable fitting.

The Stud with Nut is a versatile and reliable component used in a range of mechanical applications. Its threaded design allows for easy installation and removal, making it an efficient solution for equipment maintenance needs.

• Concentric Reducer: This type of reducer has a symmetrical design with a straight bore, ensuring a uniform reduction in pipe size. It is used when maintaining a consistent flow and preventing fluid buildup is important.
• Eccentric Reducer: An eccentric reducer has an offset bore, resulting in a non-uniform reduction in pipe size. It is used when the pipes need to be aligned at different elevations or when draining fluids is required.