Ahmedabad, Gujarat, India
Our Products
| Model | TCS-12 | TCS- -18 | TCS-24 | TCS - 30 | TCS - 36 |
|---|---|---|---|---|---|
| Machine size | 12" | 18" | 24" | 30" | 36" |
| Maximum stroke | 14" | 20" | 26" | 32" | 38" |
| Len of Ram | 26" | 36" | 50" | 58" | 66" |
| Max. dist. of Table to Ram | 9" | 15" | 19" | 20" | 20" |
| Min. dist. of table to Ram | ½” | 2" | 2" | 2" | 2" |
| Max. vertical travel to tool slide | 5" | 4" | 7" | 7" | 7" |
| Length & width of table top. | 12" x 9" | 18" x 12 " | 24"x 15" | 30.1/2" x 16" | 36" x 18" |
| Length & width of table slide | 24" x 10" | 30" x 11 " | 37.1/2" x 12" | 44"x 13" | 48" x 14" |
| Length of cross slide | 24" | 30" | 37.1/2" | 44" | 48" |
| Width of Ram | 8.1/2" | 10" | 12.1/2" | 12.1/2" | 13" |
| No of speeds | 4 | 3 | 4 | 4 | 4 |
| Main Motor Power | 1 HP | 2 HP | 2 HP | 3 HP | 5 HP |
| SIZE | 305mm | 457 mm |
| Length of ram storke | 660mm | 960 mm |
| Length of ram | 520x203 | 700x270 mm |
| Length of width ram bearing | 257/40mm | 360 / 75 mm |
| Max /min distance of table to ram | 305 x 203 | 457x305 mm |
| Working surface of table - | 60L 60R | 60L 60R |
| Angular movement of table | 140 mm | 152 mm |
| Max vertical table travel - | 60L 60R | 60L 60R |
| Max swivel of tool head - | Manual | Manual |
| Tool head feed | 2 hp | 2 hp |
| Motor | 80 Itr | 80 Itr |
| Hydrolic tank capacity | 650 kgs | 1200 kg |
| MODEL | TCS-12-H | TCS-18-H |
|---|---|---|
| SIZE | 305mm | 457 mm |
| Length of ram storke | 660mm | 960 mm |
| Length of ram | 520x203 | 700x270 mm |
| Length of width ram bearing | 257/40mm | 360 / 75 mm |
| Max /min distance of table to ram | 305 x 203 | 457x305 mm |
| Working surface of table - | 60L 60R | 60L 60R |
| Angular movement of table | 140 mm | 152 mm |
| Max vertical table travel - | 60L 60R | 60L 60R |
| Max swivel of tool head - | Manual | Manual |
| Tool head feed | 2 hp | 2 hp |
| Motor | 80 Itr | 80 Itr |
| Hydrolic tank capacity | 650 kgs | 1200 kg |
Bhavya Machine Tools offers various shaping machines such as V belt driven shaping machine. The tool is primarily used for sculpting straight and flat metal surfaces. This is even useful for cutting steel, aluminum, ferrous and non-ferrous metals in different curves, angles and shapes. Our tools are produced using superior grade, well ribbed cast iron to ensure higher efficiency and stability.
We provide sturdy, safe and durable tool. These tools are resistant to corrosion and other adverse climatic conditions. It can be easily installed, operated and maintained. They are energy efficient and cost-effective. We supply several models of the tool with different configurations as per customer's requirements. These are applicable in many industries.
This is an interesting machining component which is applied to shape variety of work materials like metals both ferrous and non-ferrous. Not all work shop equipment would stay effective to obtain particular shape. Bhavya Machine Tools presents V belt driven equipment that stays compatible to make different and complicated shapes like curves and angles. Our v-belt driven tools are made of corrosion resistance material. It can work on all climatic conditions and stays effective for long term application. We have designed this tool with several safety aspects considered therefore it is absolutely safe to work with and devoid of risks like in other devices. Pricing is another attractive reason at Bhavya Machine Tools as we offer workshop components at affordable price than other tool manufacturers and suppliers. We make tailored models with particular configurations to match the specific machining requirement. Our tools are applicable for wide range of industries. We offer the following models which includes
HS-18-V Belt Driven Shaping Machine
This model has the capacity to make different shapes up to 18 inches. The length of Ram Stoke is 457 mm and the Ram length is 960mm. This model is equipped with 457x305 working surface table. The range of ram speed is 4 and it can make 16, 32, 64, 96 strokes per minute. Tool head feed is manual and power supply HP is 2(1.5) Kw. The overall equipment weighs about 1200kg. The whole apparatus is made of naturally seasons casting that makes it a reliable choice to apply even in adverse climatic conditions.
HS-24 V Belt Driven Shaping Machine and Specifications
This model holds the capacity of 24 inches and the length of Ram Stroke is 610 mm and length of Ram is 1232 mm. The working surface of table is 610x370 mm and the maximum travel in horizontal direction is 635 mm and through vertical direction is 380mm. Angular movement is about 60 mm towards left and 60 mm towards right. Similarly the maximum swivel of tool head is 60mm towards left and 60mm toward right and both features remain the same for all the models of v-belt driven machine. It can make 14, 28, 42, 62 strokes per minute. It requires 2.25 kw power to function. This model is specially designed for more production requirement and precise requisites
HS-30 V - Belt Driven Shaping Machine
Equipped with 30 capacity of drilling the ram length is about 1410 mm and the Ram stroke is 762mm. Working surface of table is 762x390 mm. The working speed of this equipment is 960 rotations per minute. Length of width Ram bearing is 1020x330mm and diameter of clutch pulley is 311. The range of Ram speed is 4 which is similar in all models of v-belt driven equipment.
HS-36 Shaping Machine
This equipment's capacity is 36 and working surface of table is 915x457mm. The maximum table travel through horizontal and through vertical direction is 940mm and 525 mm respectively. It requires 5 kw of power supply. It is provisioned with quick return motion mechanism and this equipment is especially designed for precise shaping and deep cut. The screws and other steel parts are made of tested special alloy steel which gives it more strength and durability.
| Model | HS-18 | HS-24 | HS-30 | HS-36 | HS-42 |
|---|---|---|---|---|---|
| CAPACITY | 18" | 24" | 30" | 36" | 42" |
| Length of Ram Stroke (mm) | 457 | 610 | 762 | 915 | 1070 |
| Length of Ram (mm) | 960 | 1232 | 1410 | 1651 | 2108 |
| Length of Width Ram Bearing | 700x270 | 867x300 | 1020x330 | 1130x330 | 1600x330 |
| Table of Ram (mm) | 360x75 | 450x76 | 510x75 | 565x102 | 600x102 |
| Working Surface of Table (mm) | 457x305 | 610x370 | 762x390 | 915x457 | 1078x533 |
| Max. Table Travel Horizontal | 488 mm | 635 mm | 787 mm | 940 mm | 1075 |
| Max. Table Travel-Vertical | 330 mm | 380 mm | 450 mm | 525 mm | 585 mm |
| Angular Movement of Table | 60°L60"R | 60"L60°R | 60°L 60°R | 60°L60°R | 60°L60°R |
| Max Vertical Travel of Tool Slide | 152 mm | 190 mm | 203 mm | 255 mm | 300 mm |
| Maximum Swivel of Tool Head | 60°L60°R | 60°L60°R | 60°L60°R | 60°L60°R | 60"L60°R |
| Dia of Clutch Pulley (mm) | 311 | 311 | 311 | 380 | 380 |
| No. of Ram Speeds | 4 | 4 | 4 | 4 | 4 |
| (Stroke Per Minute) | 16,32,64,96 | 14,28,42,62 | 8,16,32,48 | 10,20,30,50 | 8,16,32,48 |
| Dia of Motor Pulley (mm) | 70 | 70 | 76 | 88 | 88 |
| Stroke of Ram | 0.220 | 0.229 | 0.229 | 0-22 TO 0-88 | 0-22 TO 0-88 |
| Range of Tool Head Feed | Hand feed | Hand feed | Hand feed | Hand feed | Hand feed |
| Main Motor Power (HP/kw) | 2/1.5 | 3/2.25 | 5 / 3.75 | 7.5/5 | 10/7.5 |
| Motor (RPM) Cone Pulley / All Geared | 1440/960 | 1440/960 | 1440/960 | 1440/960 | 1440/960 |
| Weight (approx) (kgs.) | 1200 | 1850 | 2300 | 3500 | 4000 |
| Model | MR R200 |
|---|---|
| Chamfering height | 0-9mm |
| Chamfering angle | 15° -45° |
| Power | 380V 250W |
| Speed | 2800rpm |
| Dimension | 38 x 24 x 24,5cm |
| Weight | 12kg |
| Model | R300B |
|---|---|
| Chamfering height | R1-R4 |
| Power | 380V 250W |
| Speed | 2800rpm |
| Dimension | 53x51 x24cm |
| Weight | 28.8kg/32.8kg |
The standard for R300B is Rl, others should be done if needs.
| Model | R600 |
|---|---|
| Chamfering height | 0-1.5mm |
| Chamfering angle | 45° |
| Power | 380V 250W |
| Speed | 8500rpm |
| Dimension | 60 x 29 x 37cm |
| Weight | 40kg |
| Model | R800B | |
|---|---|---|
| Chamfering height | 0-3mm (Straight) | 0-2.5mm(Curved) |
| Chamfering angle | 15° ~45^[Straight) | 45°(Curved) |
| Power | 380V/750W | |
| Speed | 8500rpm (Straight) | 12000rpm (Curved) |
| Dimension | 53x44x69cm | |
| Weight | 75kg | |
The machine adopt Swedish SKF bearing and imported digital cuttings.
| MODEL | Q01 – 1.0x1000 | Q01 – 1.5x1320 | Q01 – 2x1000 |
|---|---|---|---|
| Maximum Shearing Thickness | 1.0mm | 1.5mm | 2.0mm |
| Maximum Shearing Width | 1000mm | 1320mm | 1000mm |
| Back Gauge Range | 0 – 700mm | 0 – 700mm | 0 – 700mm |
| Packing Dimension | 1400x760x1150mm | 1680x760x1150mm | 1400x760x1150mm |
| Net Weight | 365Kgs. | 490Kgs. | 405Kgs. |
| Model | HB-10 | EHB-10 |
|---|---|---|
| Max. Pressure | 10 Ton | 10 Ton |
| Max. Ram Stroke | 155mm | 155mm |
| Packing Dimension | 710x590x220mm | 720x590x500mm |
| Net/Gross Weight | 45/48Kgs. | 53/60Kgs. |
| Length Cutting | Shearing Capacity Nominal Rake Angle | Nominal Rake Angle | Rake Angle range | Rake Angle Stroke per min | No. of Hold downs | Holding Force | Power | Packing Dimension (LXWxH) in mm | |||||
| Model | in mm | Thickness in mm | in degree | in degree | Min. | Max. | in Kg. | in HP | |||||
| M.S. | S.S | ||||||||||||
| HFR215 | 1500 | 2 | 2 | 0.6 | 0.6 | 1° | 1° | 30 | 30 | _ | 3 | 2000x1000x1250 | |
| HFR 220 | 2000 | 2 | 2 | 0.6 | 0.6 | 1° | r | 25 | 25 | _ | _ | 3 | 2500x1250x1500 |
| HFR 225 | 2500 | 2 | 2 | 0.6 | 0.6 | 1° | r | 20 | 20 | 3 | 3000x1250x1850 | ||
| HFR 315 | 1500 | 3.15 | 4 | 2 | 3.15 | 1°15′ | 0.5-2° | 25 | 15 | 9 | 1500 | 3 | 2200x1250x1950 |
| HVR 320 | 2000 | 3.15 | 4 | 2 | 3.15 | ri5 | 0.5-3° | 20 | 11 | 11 | 2000 | 3 | 2700x1250x1950 |
| HVR 325 | 2500 | 3.15 | 4 | 2 | 3.15 | 1°15′ | 0.5-3° | 25 | 13 | 13 | 2300 | 5 | 3200x1250x2000 |
| HVR 330 | 3000 | 3.15 | 4 | 2 | 3.15 | 1°15′ | 0.5-3° | 21 | 9 | 16 | 2600 | 5 | 3700x1400x2100 |
| HVR 340 | 4000 | 3.15 | 4 | 2 | 3.15 | 1°15′ | 0.5-3° | 12 | 6 | 20 | 3200 | 7.5 | 4700x1500x2250 |
| HVR 415 | 1500 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 25 | 13 | 8 | 4500 | 7.5 | 2250x1250x2050 |
| HVR 420 | 2000 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 23 | 11 | 11 | 6200 | 7.5 | 2750x1250x2100 |
| HVR 425 | 2500 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 21 | 8 | 13 | 8000 | 7.5 | 3300x1400x2250 |
| HVR 430 | 3000 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 21 | 10 | 16 | 10000 | 10 | 3700x1500x2400 |
| HVR 440 | 4000 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 15 | 6 | 20 | 12000 | 10 | 4700x1650x2600 |
| HVR 450 | 5000 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 10 | 3 | 24 | 15000 | 10 | 5700x1700x2750 |
| HVR 460 | 6000 | 4 | 6 | 3 | 4 | 1°37′ | 0.5-3° | 10 | 3 | 28 | 15000 | 10 | 6700x1800x2850 |
| HVR 615 | 1500 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 22 | 8 | 8 | 6500 | 10 | 2250x1300x2100 |
| HVR 620 | 2000 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 20 | 7 | 11 | 6500 | 10 | 2750x1350x2150 |
| HVR 625 | 2500 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 24 | 8 | 13 | 8500 | 15 | 3300x1500x2300 |
| HVR 630 | 3000 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 22 | 6 | 16 | 10800 | 15 | 3800x1650x2500 |
| HVR 640 | 4000 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 22 | 6 | 20 | 13600 | 20 | 4800x1700x2750 |
| HVR 650 | 5000 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 18 | 4 | 24 | 16500 | 20 | 5700x1800x2850 |
| HVR 660 | 6000 | 6 | 8 | 4 | 6 | 1°45′ | 0.5-3° | 14 | 3 | 28 | 19500 | 20 | 6700x1900x2950 |
| HVR 815 | 1500 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 15 | 8 | 8 | 10500 | 10 | 2250x1350x2100 |
| HVR 820 | 2000 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 18 | 8 | 11 | 12000 | 15 | 2750x1450x2250 |
| HVR 825 | 2500 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 20 | 8 | 13 | 16500 | 20 | 3300x1650x2450 |
| HVR 830 | 3000 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 18 | 6 | 16 | 18500 | 20 | 3800x1800x2600 |
| HVR 840 | 4000 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 16 | 4 | 20 | 23000 | 20 | 4800x1850x2800 |
| HVR 850 | 5000 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 12 | 3 | 24 | 27000 | 25 | 5750x1950x2900 |
| HVR 860 | 6000 | 8 | 10 | 6 | 8 | 2° | 0.5-3° | 8 | 2 | 28 | 31000 | 25 | 6750x2100x3100 |
| HVR 1015 | 1500 | 10 | 13 | 8 | 10 | 2° | 0.5-3° | 14 | 6 | 8 | 10500 | 10 | 2250x1350x2200 |
| HVR 1020 | 2000 | 10 | 13 | 8 | 10 | 2° | 0.5-3° | 18 | 8 | 11 | 13000 | 15 | 2750x1500x2300 |
| HVR 1025 | 2500 | 10 | 13 | 8 | 10 | 2° | 0.5-3° | 15 | 8 | 13 | 17500 | 20 | 3300x1650x2500 |
| HVR 1030 | 3000 | 10 | 13 | 8 | 10 | 2° | 0.5-3° | 12 | 6 | 16 | 20000 | 20 | 3800x1850x2750 |
| HVR 1040 | 4000 | 10 | 13 | 8 | 10 | 2° | 0.5-3° | 13 | 6 | 20 | 25000 | 25 | 4800x1950x2850 |
| HVR 1050 | 5000 | 10 | 13 | 10 | 2° | 0.5-3° | 10 | 5 | 24 | 30000 | 30 | 5750x2050x3000 | |
| HVR 1060 | 6000 | 10 | 13 | 8 | 10 | 2° | 0.5-3° | 8 | 3 | 28 | 35000 | 30 | 6750x2200x3300 |
| HVR 1320 | 2000 | 13 | 16 | 10 | 13 | 2° | 1-3° | 15 | 8 | 11 | 16000 | 25 | 2850x1800x2600 |
| HVR 1325 | 2500 | 13 | 16 | 10 | 13 | 2° | 1-3° | 13 | 6 | 13 | 20000 | 25 | 3350x1900x2750 |
| HVR 1330 | 3000 | 13 | 16 | 10 | 13 | 2° | 1-3° | 11 | 6 | 16 | 25000 | 25 | 3800x1950x2850 |
| HVR 1340 | 4000 | 13 | 16 | 10 | 13 | 2° | 1-3° | 9 | 4 | 20 | 30000 | 30 | 4800x2000x2950 |
| HVR 1350 | 5000 | 13 | 16 | 10 | 13 | 2° | 1-3° | 9 | 4 | 24 | 35000 | 40 | 5750x2150x3150 |
| HVR 1360 | 6000 | 13 | 16 | 10 | 13 | 2° | 1-3° | 7 | 3 | 28 | 40000 | 40 | 6750x2300x3500 |
| HVR 1620 | 2000 | 16 | 20 | 13 | 16 | 2° | 1-3° | 18 | 6 | 11 | 20000 | 30 | 3000x1900x2800 |
| HVR 1625 | 2500 | 16 | 20 | 13 | 16 | 2° | 1-3° | 15 | 5 | 13 | 25000 | 30 | 3500x2000x2900 |
| HVR 1630 | 3000 | 16 | 20 | 13 | 16 | 2° | 1-3° | 12 | 5 | 16 | 28000 | 30 | 4000x2000x3000 |
| HVR 1640 | 4000 | 16 | 20 | 13 | 16 | 2° | 1-3° | 7 | 3 | 20 | 33000 | 30 | 4800x2050x3100 |
| HVR 1650 | 5000 | 16 | 20 | 13 | 16 | 2° | 1-3° | 7 | 3 | 24 | 38000 | 40 | 5750x2250x3300 |
| HVR 1660 | 6000 | 16 | 20 | 13 | 16 | 2° | 1-3° | 5 | 2 | 28 | 43000 | 40 | 6750x2350x3700 |
| HVR 2025 | 2500 | 20 | 25 | 16 | 20 | 2° | 1-3° | 12 | 5 | 13 | 28000 | 40 | 3500x2000x3000 |
| HVR 2030 | 3000 | 20 | 25 | 16 | 20 | 2° | 1-3° | 11 | 5 | 16 | 35000 | 40 | 4000x2100x3200 |
| HVR 2040 | 4000 | 20 | 25 | 16 | 20 | 2° | 1-3° | 9 | 4 | 20 | 40000 | 50 | 4800x2200x3300 |
| HVR 2050 | 5000 | 20 | 25 | 16 | 20 | 2° | 1-3° | 8 | 3 | 24 | 45000 | 60 | 5800x2350x3500 |
| HVR 2060 | 6000 | 20 | 25 | 16 | 20 | 2° | 1-3° | 5 | 2 | 28 | 50000 | 60 | 6800x2450x4100 |
| HVR 2525 | 2500 | 25 | 30 | 20 | 24 | 2° | 1-3° | 10 | 4 | 13 | 36000 | 60 | 3400x2250x3300 |
| HVR 2530 | 3000 | 25 | 30 | 20 | 24 | 2° | 1-3° | 8 | 4 | 16 | 45000 | 60 | 4000x2300x3300 |
| HVR 2540 | 4000 | 25 | 30 | 20 | 24 | 2° | 1-3° | 7 | 4 | 20 | 50000 | 75 | 5000x2300x3500 |
| HVR 2550 | 5000 | 25 | 30 | 20 | 24 | 2° | 1-3° | 5 | 2 | 24 | 55000 | 75 | 6000x2450x3700 |
| HVR 2560 | 6000 | 25 | 30 | 20 | 24 | 2° | 1-3° | 3 | 1 | 28 | 60000 | 75 | 7000x2600x4300 |
| MODEL | BFP-D3 mm |
BFP-D6 mm |
BFP-D10 mm |
BF9P-D12 mm |
|---|---|---|---|---|
| Base to Guide | 190 | 229 | 305 | 305 |
| Centre to back | _ | _ | _ | _ |
| Diameter of Screw | 48 | 58 | 85.5 | 95.2 |
| Hole in Bed Without Ring | 76 | 114 | 203 | 203 |
| Hole in Bed with Ring | 38 | 57 | 102 | 127 |
| Between Frames | 152 | 288 | 355 | 355 |
| Diameter of Fly Wheel | 670 | 58 | 86 | 95 |
| Hole in Ram ( Diameter) | 25.4 | 25.4 | 38 | 38 |
| Hole in Ram (Deep) | 38 | 51 | 63 | 63 |
| Model | RX-25 | RX-35 | RX-45 | RX-60 | RX-80 | RX-110 | RX-160 | RX-200 | |
| S – H – P | S – H – P | S – H – P | S – H – P | S – H – P | S – H – P | S – H – P | S – H – P | ||
| Capacity (Tonnage) | 25 | 35 | 45 | 60 | 80 | 110 | 160 | 200 | |
| Length of Stroke (D)mm | 80 – 50 – 35 | 90 – 60 – 40 | 110 – 70 – 45 | 130 – 80 – 50 | 150 – 100 – 60 | 180 – 110 – 70 | 200 – 130 – 80 | 220 – 150 – 90 | |
| Stroke Per Minute | Fixed Speed | 90 – 110 – 140 | 80 – 100 – 130 | 70 – 90 – 120 | 60 – 80 – 100 | 60 – 80 – 100 | 50 – 70 – 90 | 40 – 60 – 80 | 35 – 50 – 65 | ||||||||||||||||
| Variable Speed | 70 | 80 | 80 | 60 | 70 | 80 | 50 | 60 | 80 | 40 | 55 | 70 | 40 | 50 | 65 | 35 | 45 | 60 | 30 | 35 | 50 | 25 | 30 | 40 | |
| 110 | 140 | 180 | 95 | 130 | 170 | 85 | 120 | 160 | 75 | 110 | 150 | 75 | 100 | 140 | 65 | 90 | 125 | 50 | 70 | 100 | 45 | 60 | 85 | ||
| Tonnage Rating Point (B.D.C.)mm | 3.2 – 3.2 – 2.3 | 3.2 – 3.2 – 2.3 | 3.2 – 3.2 – 2.3 | 4 – 4 – 2.3 | 5 – 5 – 3.2 | 5 – 5 – 3.2 | 6 – 6 – 4 | 6 – 6 – 4 | |
| Die Height (D.H)mm | 230 – 200 – 200 | 250 – 220 – 220 | 270 – 240 – 240 | 300 – 270 – 270 | 330 – 300 – 300 | 350 – 320 – 320 | 400 – 360 – 360 | 450 – 400 – 400 | |
| Adjustment of Slide(G)mm | 50 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | |
| Area of Slide(PxQ)mm | 330 x 250 | 380 x 300 | 430 x 350 | 480 x 400 | 560 x 460 | 650 x 520 | 720 x 580 | 860 x 650 | |
| Diameter of Shank Hole mm | Ø38.1 | Ø50.8 | Ø50.8 | Ø50.8 | Ø50.8 | Ø50.8 | Ø65 | Ø65 | |
| Area of Bolster (ExF)mm | 700 x 320 | 780 x 400 | 840 x 440 | 900 x 520 | 1050 x 600 | 1150 x 680 | 1250 x 760 | 1400 x 840 | |
| Thickness of Bolster (T)mm | 85 | 100 | 115 | 130 | 140 | 155 | 165 | 180 | |
| Height of Bolster (Z)mm | 800 | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | |
| Inside Measurement frame (R)mm | 394 | 490 | 516 | 544 | 610 | 670 | 730 | 900 | |
| Motor Floor Side Adjustment HPxP | – | – | – | 0.5 x 4 | 0.5 x 4 | 0.5 x 4 | 1 x 4 | 1 x 4 | |
| Foot Size (AxB)mm | 750 x 1058 | 830 x 1125 | 890 x 1210 | 940 x 1315 | 1050 x 1480 | 1160 x 1680 | 1300 x 1985 | 1480 x 2113 | |
| Main Motor | Fixed Speed (HP x P) | 5 x 4 | 5 x 4 | 5 x 4 | 7.5 x 4 | 10 x 4 | 10 x 4 | 15 x 4 | 20 x 4 |
| Variable Speed (HP x P) | 5 x 4 | 5 x 4 | 7.5 x 4 | 10 x 4 | 10 x 4 | 15 x 4 | 20 x 4 | 25 x 4 | |
| Moter for side Adjustment (HP x P) | – | – | – | 0.5 x 4 | 0.5 x 4 | 0.5 x 4 | 1 x 4 | 1 x 4 | |
| Foot size (A x B)m.m. | 750 x 1058 | 830 x 1125 | 890 x 1210 | 940 x 1315 | 1050 x 1480 | 1160 x 1680 | 1300 x 1985 | 1480 x 2113 | |
| Position of Anchor Bolts(MxN)mm | 620 x 860 | 730 x 925 | 790 x 1010 | 840 x 1115 | 950 x 1230 | 1060 x 1380 | 1180 x 1655 | 1360 x 1755 | |
| Accuracy | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | |
| Die Cushion (Optional) | |||||||||
| Capacity (Tonnage) | 2.2 | 2.2 | 3.5 | 3.5 | 6 | 8 | 10 | 14 | |
| Length of Stroke (mm) | 50 | 50 | 70 | 70 | 80 | 90 | 100 | 110 | |
| Area of Pad (mm) | 300 x 210 | 300 x 210 | 340 x 234 | 340 x 234 | 410 x 260 | 480 x 320 | 540 x 340 | 640 x 440 | |
Standard Equipment:
1. Coolant Pump
2. Work Arbour
3. Hob Arbour
4. Feed Speed Gears
Standard Equipment:
| Model | JS 5 | JS 8 |
| Maximum Dia. of Spur Gear | 18" | 30" |
| Minimum Dia. of Spur Gear | 1/2" | 1" |
| Maximum Module | 5 Module | 8 Module |
| Maximum Travels of Hob Slide | 10" | 12" |
| Maximum Helical Gear Cutting - LH/RH | 45° LH/RH | 45° |
| Diameter of Work Table | 16" | 22" |
| Work Table Bore | 2" | 3" |
| Maximum Distance b/w Hob & Work Table | 11" | 18" |
| Maximum Dia. of Hob | 4" | 5" |
| Mounting Taper of Hob Spindle | Mt 3 | Mt 4 |
| Hob Spindle Speed | 6 | 8 |
| ELECTRIC EQUIPMENT: | ||
| Main Motor | 3 H.P. | 3 H.P. |
| Rapid Motor | 1.5 H.P. | 2 H.P. |
Arbour Press is suitable for pressing solid, hollow and eyelet rivelting, staking, flaring, numbering, marking, assembling etc.
Arbour Press Machine:-
Heavy duty hand operated round rack spring controlled arbour press ideally suitable for pressing solid, hollow and eyelet rivelting, staking, flaring, numbering, marking, assembling etc., hence it is extremely useful in all light engineering industries. The press is provided with adjustable stroke automatic spring return of spindle, adjustable spring tensioning device and T slotted base surface.
| Model | No | BSAP-0 | BSAP-1 | BSAP-2- | BSAP3 |
| Max Pressure | ton | 1/4 | 1/2 | 3/4 | 1 |
| exerted | kg | 250 | 500 | 750 | 1000 |
| Max Distance from | mm | 50 | 70 | 85 | 120 |
| Center to back | inch | 2 | 2.2/4 | 3.3/8 | 4.3/4 |
| Min height | mm | 38 | 82 | 158 | 215 |
| from base to guide | inch | 1.1/2 | 3.1/4 | 6.1/4 | 8.1/2 |
| Max height | mm | 70 | 140 | 260 | 315 |
| from base to guide | inch | 2.3/4 | 5.1/2 | 10.1/4 | 12.1/2 |
| Size of Rack | mm | 28 | 35 | 38 | 48 |
| inch | 1.1/8 | 1.3/8 | 1.1/2 | 1.7/8 | |
| Size of | mm | 125x95 | 175x140 | 232x168 | 305x248 |
| rectangular table | inch | 5x3.3/4 | 7x5.1/4 | 9.1/8x6.5/8 | 12x9.3/4 |
| Size of T slott | mm | 12 | 12 | 12 | 12 |
| on table | inch | 1/2 | 1/2 | 1/2 | 1/2 |
| Hole in rack | mm | 10 | 12 | 15 | 19 |
| inch | 3/8 | 1/2 | 5/8 | 3/4 | |
| Length of lever | mm | 225 | 300 | 400 | 500 |
| (Handle) | inch | 9 | 12 | 16 | 20 |
The Treadle shearing machine is used in bending metal sheets and is one the best bending tools in the industries while Treadle applied in cutting metal sheets. Treadle shearing machine are popularly used in cutting large sheets, bars, and plates of metallic and non metallic materials into elegance shapes. The machines are excellently engineered for speedy and accuracy. They are advanced technologically with modern design, tough and durable while Treadle shearing machines are users friendly with low maintenance cost se well as secure to the users. The shearing machines are applied in automobile, printing, engineering, electronic, wood working and frame construction industries. Treadle shearing machines require electrical power and offers ultimate performances in metal handlings. It is a very suitable device for use in the large scale shearing operations and work effectively with use of the electricity power. It is also suitable in cutting as is very easy to use
