Other Products / Services #2308240

Bhavya Machine Tools offers:
1. Imported Sheet Metal
2. Sheet Metal Machines
3. Hydraulic Profile Pipe Bending India

The spindle speaks the difference in machining when it comes to vertical machining center. Bhavya Machine Tools presents this equipment that is featured with vertically orienting spindle. This device is also known for providing excellent tolerance at the time of milling and suits best for working with die and mould works. DMTG vertical machining center is also known for its durable quality for repeatable operations and performance accurate finishing on work materials. This imported vertical machining center is also known for speed, flexibility and energy efficient aspects wherein the consumer is sure to obtain excellent return on investment. It can be applied over complex work materials like ceramics apart from metals.

Note :As Improvements are made time to time the specifications are subject to change without notice and are not binding on us. Pictures shown with optional accessories.

• High rigidity structure design : Due to the machine bed the whole casting, with larger bearing section and, therefore, has good rigidity and shock-absorbing capacity, ensures high precision machining.


• High efficiency, low noise design : The main transmission system of machine tool based on AC servo motors, combined with efficient parallel V -belt direct drive spindle. Gearbox transmission chain is to avoid causing noise problems.


• High speed, high rigidity spindle : The spindle ends with precision high speed spindle bearings and impose the appropriate preload, combined with optimal span of supports and box style headstock, spindle with high rigidity and high speed operation.


• High reliability of tool holder : Machine configurations include knife or an electric knife with high reliability and repeatability.


• Precision and rapid vertical and horizontal drive: Machine tool selection of ball screw and linear rolling guide, High efficiency, good accuracy, the machine tool moved fast and stable, and a high positioning accuracy.


• Automatic central lubrication system: Ensures effective lubrication of guideway and ball screw.


• Fully enclosed protection: Avoiding coolan leaks, safe and comfortable working environment for the operator.

• One-piece robust heavy duty cast iron 45slant-bed. With FEA analysis and reasonable positioning of cylindrical rib and diagonal rib, the main body is heavy duty, high rigidity and stability, which guarantees high precision while machining.


• The main transmission system introduces a wide range AC servo motor which features big torque output with low speed. It is directly driven with high speed timing belts with less noise.


• The fully enclosed spindle unit is free of maintenance. The pre-tensioned spindle bearings guarantee a stable performance of high speed and low noise.


• Pre-tensioned longitudinal balls crew overcomes the affection of balls crew distortion and thermal distortion so that high precision and rigidity can be assured.


• A robust tailstock block is equipped for support of heavy duty work-piece.


• Enclosed guards and oil and water separating design provides a neat and user-friendly operation environment.


• C axis and a live tooling system can be equipped as an option to meet the requirement of high precision turning and milling machining.


• Automatic compulsory lubricating on mating surfaces and balls crews.


• A wide options are available for different needs, ie. Programmable hydraulic tailstock, manual or automatic tool setter, programmable hydraulic steady rest, automatic sliding door, etc.

• Single Spindle Structure with High Accurate Bearing Provide High Speed and prevent it from deformation when overheat.


• 45 Degree Slant Bed Structure with Liner Guide Way highly increases the accuracy and stability.


• Integral Motor and Guide Way design ensure the Accuracy that may effect by Installation.


• Integral Sealed protection all Electric Device from Water, Oil and Metal Shavings.


• High Accurate Collets provides more protection for the surface of work piece when machining and durable for repeat clamping, also easy To disassemble.

• One-piece robust heavy duty cast iron 45slant-bed. With FEA analysis and reasonable positioning of cylindrical rib and diagonal rib, the main body is heavy duty, high rigidity and stability, which guarantees high precision while machining.


• The main transmission system introduces a wide range AC servo motor which features big torque output with low speed. It is directly driven with high speed timing belts with less noise.


• The fully enclosed spindle unit is free of maintenance. The pre-tensioned spindle bearings guarantee a stable performance of high speed and low noise.


• Pre-tensioned longitudinal balls crew overcomes the affection of balls crew distortion and thermal distortion so that high precision and rigidity can be assured.


• A robust tailstock block is equipped for support of heavy duty work-piece.


• Enclosed guards and oil and water separating design provides a neat and user-friendly operation environment.


• C axis and a live tooling system can be equipped as an option to meet the requirement of high precision turning and milling machining.


• Automatic compulsory lubricating on mating surfaces and balls crews.


• A wide options are available for different needs, ie. Programmable hydraulic tailstock, manual or automatic tool setter, programmable hydraulic steady rest, automatic sliding door, etc.

• Belt driven and round column


• Milling, drilling, tapping, boring and roaming


• Headstock swivels 360 horizontally


• Micro feed precision


• 12 steps speed


• Adjustable gibs on table precision


• Posive spindle lock


• Strong rigidity power cutting and precise positioning.


• 
  Standard Accessories :
  


• Allen wrench


• Wedge


• Tie Rod


• Drill Chuck


• Milling cutter holder


• Mill Chuck


• Working Lamp


• Coolant System


• Machine Stand


• Changing Sleeve


• Parallel Vise


• Boring Bar

• Belt driven and round column


• Milling, drilling, tapping, boring and roaming


• Headstock swivels 360 horizontally


• Micro feed precision


• Adjustable gibs on table precision


• Strong rigidity power cutting and precise positioning.


• 
  Standard Accessories :
  


• Allen wrench


• Wedge


• Tie Rod


• Drill Chuck


• Milling cutter holder


• Mill Chuck


• Working Lamp


• Coolant System


• Machine Stand


• Changing Sleeve


• Parallel Vise


• Boring Bar

• Worktable auto feeding X , Y


• Spindle speed change cyclically and spindle auto feeding and cyclic change of feeding speed


• Milling, drilling, tapping, boring and roaming


• Head swivels 90 vaetically


• Micro feed precision


• Adjustable gibs on table precision


• Strong rigidity power cutting andprecise positioning.


• 
  Standard Accessories :
  


• Allen wrench


• Wedge


• Tie Rod


• Drill Chuck


• Milling cutter holder


• Mill Chuck


• Working Lamp


• Coolant System


• Machine Stand


• Changing Sleeve


• Parallel Vise


• Boring Bar


• Auto Tapping Arrangement

• Vertical Force control through Hydraulic


• Multi Degree Vice


• Vertical Cutting Position


• Strong Structure for Big Cutting


• Saw Blade


• Electricals


• Tool Kit


• Instruction Manual

The MR-60A can sharpen $ 3 to 60(4> 80) all kinds of drills, such as standard twist drills, bottoming drills, multiple diameter drills, 2-four fact drills, wood drills, spot facer.

• Bottom roll are fixed and driven by Gears and warm Reduction Gear Box. Top Roll rotates in fixed positions andean be adjusted up & down manually by adjustable screws.


• Housing are made from M.S. Plate of suitable strength and mounted on heavy base frame. Rolls are made fromforged steel and perfectly machined for accurate result.


• For longer life and smooth working of machine, Gun Metal Bushes are provide and given sufficient lubrication systemA

Planner Machines due to the unmatched quality and unsurpassable performance. The materials used in the manufacturing of the Heavy Duty Planner Machines ensure high durability, tensile strength and resistivity to adverse conditions. Moreover, easy operation, less input requirements, high output and low maintenance cost are some of the factors thatdistinguish our Planner Machines from others available in the market.

• Single Spindle Structure with High Accurate Bearing Provide High Speed and prevent it from deformation when overheat.


• 45 Degree Slant Bed Structure with Liner Guide Way highly increases the accuracy and stability.


• Integral Motor and Guide Way design ensure the Accuracy that may effect by Installation.


• Integral Sealed protection protects all Electric Device from Water, Oil and Metal Shavings.


• High Accurate Collets provides more protection for the surface of work piece when machining and durable for repeat clamping, also easy To disassemble.

• 3-Jaw Chuck


• Heavy Duty Dog


• ChuckSteady Rest


• Follow Rest


• Revolving Centre


• Centre Sleeve


• Tool Set


• Foundation Bolt


• Instruction Manual


• CW- H- Series has five models of extra heavy duty lathes consisting 21/12 no of spindle speed. This heavy duty lathe has 3 Jaw Chuck that holds an object having radial symmetry. Three- jaw chucks, used to hold bits in power drills, commonly used equipment for metal working lathes.

There are 5 models of extra heavy duty lathe for the same. These imported all geared lathe machines contain dog chucks which are more often known as a lathe carrier. This carrier is used for turning between lathes and centres. Power of Rapid Traverse Motor is 2 HP.

• Universal Feed Gear Box with Lead Screw, Feed shaft & Starting Shaft Separate


• Hardened & Ground Bedways


• Hardened & Profile Ground Head Stock GEARS Made from Alloy Steel


• A2-6 Spindle Nose


• Electromagnetic Brake with Foot Pedal


• Turcite-B Coated Carriage Guideways for Bed


• ET model of High Speed All Geared Lathe has electromagnetic brake consisting foot pedals. This machine has excellent operating speed and it is accurate. The appearance of the machine is attractive.

• High Tensile Casting


• Head Stock Latest Design


• Bed & Spindle are Hardened & Ground


• One piece lathe bed casting ensures better rigidity


• Head stock gears are of special alloy steel


• Head stock spindle is ground and runs in one anti friction taper roller bearings and one ball bearings in front wall of head stock and one taper roller bearing in rear side wall of head stock.


• Oil pump is provided for lubrication of head stock gear and shafts


• Spindle nose type Bayonet size 11 in device model 4310 & 5610. Spindle nose type Bayonet size 15 in machine model 6610


• Universal Norton gear box provides for wide range of British and Metric threads


• Drop worm type feed engage / disengage lever for easy operation


• Control panel for on / off the tool , reverse / off / forward start handle is given along with apron gear box for easy control.


• Tailstock quill movement operated by hand feed with dual feed gear box.


• Rapid saddle movement ( Optional )


• Provides most advantageous machining performance even when the productivity remains non-stop and tough


• Bears high metal cutting capacity


• All the tool parts are tested for precision, quality and standards


• Apart from general workshop activities, this tool is applicable in mining, paper, shipping and many more industries

• High Tensile Casting


• Latest Design Head Stock


• Hardened & Ground Bed & Spindle


• It is made of strong construction that allows the user to experience precise machining and fast performance.


• The V-belt feature allows for fast performance ratio and consistent production on long run.


• Precision is guaranteed.


• Maintenance aspects are easy and convenient.


• Produces comparatively lesser noise during machining.


• This equipment can be installed easily and stays perfect for moderately spaced workshops.


• Equipped with excellent working platform to handle work materials conveniently.


• Stays efficient for shaping requisites in wide range of industries.

• High Tensile Casting


• Latest Design Head Stock


• Hardened & Ground Bed & Spindle


• Our V-belt drive Heavy duty lathe machine is the perfect machining equipment for handling hard materials and it is a space saving workshop equipment.


• We have created this equipment considering the smart aspects in technology to offer consumers with the best machining experience.


• It also stays precise, fast, reliable and consistent.


• The V-belt provision allows for accuracy in shaping metals and other types of work materials.


• It keeps the work material from slipping off from the machining platform.


• It offers comparatively speedy performance apart from precise mechanism.


• Machining aspects are excellent as it is vibration free and requires lesser time and man power for operating and maintenance.

• High Tensile Casting


• Latest Design Head Stock


• It is one of the heavy duty tools that have been constructed with high grade and strong materials like iron and steel.


• We have equipped one of the latest head stock designs for this equipment for the users to experience precise, fast and reliable lathe performance.


• It is highly industrial friendly and would stay an efficient choice of investment for your industries.


• Our this instruments are preferred in several industries for its robust structure, reliability, accuracy in machining and above all for pricing.


• 
  Roll Turning Lathe Machine Manufacturer & Exporter
  

  Bhavya Machine Tools provides different types of roll turning lathe machine. They are designed to create objects that have symmetry about an axis of rotation. These equipments are used for accurately machining comparatively hard materials. This instruments incorporate the latest technology to ensure improved performance.

  
  

  We offer flawlessly designed devices with tight tolerances. Our tools are compact and offer better value for money. Thesemultipurpose lathe machinesfeature simplicity, robustness and longer working life. We supply many models in various technical specifications. They are the ideal solution for a wide range of applications. They are used in power plants, steel rolling mills, tool rooms, ship building, repairing shops, paper mills, workshops, textile, oil, mining industries etc. This device is one of the best outcomes of precision engineering designs of Bhavya Machine Tools.

  
  

• High Tensile Casting


• Latest Design Head Stock


• Hardened & Ground Bed & Spindle


• Our light duty equipmentis designed in standard model and super model.


• It is easy to accommodate this equipment in moderate workshops and stays a very good investment for small scale metal industries.


• Suitable for applying in variety of industrial machining processes.


• Perfect workshop tool for engineering industry.


• Lots of metal cutting works can be tried out using this equipment.


• It serves the purpose of transforming metal work materials into different shapes over pre-determined dimensions.


• It is easy to operate and eradicates many complexities which are present in manual metal shaping.


• Maintenance is absolutely hassle free as all the machine components are made of corrosion resistant and higher grade metals.

The PBM DP arrangement 3 ROLL PYRAMID TYPE HYDRO-MECHANICAL PLATE BENDING are planned with twofold side pre-squeezing course of action. The one of a kind outline allows the pre-squeezing of employment by both base rolls; subsequently the occupation is finished in single operation. This component makes the machine more gainful and reasonable for taking care of overwhelming employments. The top roller is settled and pre-pinching by both base rolls are through pressure driven barrels.

The job is bolstered from one end to complete pre-squeezing and whole shell is moved to wanted curve span. Flip side pre-squeezing is done by second base move to finish the shell. The complete shell is set up in single operation.

Motorised and hand operated jenny or hurrying machine designed for edging, flanging or hurrying the edges of all classes of tin plate work of any shapes, generally used for edging and flanging bottom and bodies to various angle previous to panning or setting down, double seaming etc. provided with an adjustable depth gauge, one pair jenny roll and handle for hand and motor mount, motor pulley and pulley coverfor motorised model.