BHT manufactures a quality line of high-pressure integral union connections in a broad range of configurations and sizes from 2" and 3" and in pressure ratings to 15, 000 psi NSCWP*. Manufactured from high strength alloy steel, BHT integrals feature a lightweight design which is not found in competitors' products. All BHT integral union connections are subjected to controlled heat-treat process. 

Details :

• Size : 2" 
• End Type : customized 
• Test Pressure : 9, 000psi 
• CWP : 6, 000psi (413.68 bar) 
• Service : Standard, H2S 
• Used for Cementing, Drill Mud, Fracturing Fluids, Well Servicing 
• MTR and Test Report are offered at any time 

BHT Figure 206 Hose Fitting is constructed of high quality cast ductile iron. This union is also referred to as a Hose Barb Union. It features a union end connection that is interchangeable with a figure 200/206 connection, and it comes with an integral hose shank on both the male and female sub. The figure 206 union is designed to save time and money by eliminating the need to weld a hose nipple onto a figure 200/206 hammer union. This union is uniquely designed to be tested to twice the rated working pressure, which is often a requirement for hoses used in oilfield applications. 

BHT hose loops are used for a variety of high pressure well service applications including discharge lines, water lines, cementing and circulating lines, well test lines and temporary flow lines. 

BHT hoses utilize field proven BHTswivel joints for greater flexibility, shock and vibration resistance, and more uniform flow. Also utilized are BHT wing union end connections for fast, pressure tight make-up and break-out. 

These rugged hoses handle a full range of fluids to cold working pressures up to 15, 000 psi and come in sizes and configurations to meet any need. Hoses for sour gas service are available at cold working pressure up to 10, 000 psi. OFE hoses are designed to easily and conveniently fold up for storage and transportation. 

Precision Finish  :

• Material Stainless Steel, Low Carbon or Inconel. 
• Dual Certification for low Carbon 
• Full Traceability 

This light weight piping is available in lengths up to 10 feet to handle fluids at cold working pressure to 15, 000 psi. They are used on high-pressure discharge lines, auxiliary flow lines, choke-and-kill lines and for abrasive applications. 

BHT 2" Fig. 1502 and 3" Fig 1502 Long Radius Swivel Joints have undergone a design enhancement, creating a superior and longer lasting product. New features have created a swivel with extended life while maintaining uniform flow. 

New features include : 

• Additional erosion material under critical ball race locations. 
• More stable assembly with better load distribution in 3" Fig. 1502 series, featuring longer ball race life. 
• Better distribution of material for more robust female ball care components in 2" Fig. 1502 and 3" Fig. 1502 models. 
• No danger for any mismatches.
• Available in traditional hammer union styles. 

BHT also manufactures flow line piping in non-pressure seal thread from 6, 000 to 15, 000 psi, up to 20 feet in length. 

Details :

• BHT Wellhead Flange Adapters are designed to be used in the upper most position on wellheads and therefore enables wireline and other well service operations to be performed through the wellhead into the well bore. 
• BHT Wellhead Flange Adapters are available in various bore sizes and with quick union connections compatible with Bowen and Otis type quick unions. Additionally, Flange /Adapters are supplied for standard or H2S service and working pressure up to 15, 000 psi. 

BHT manufactures a quality line of high-pressure integral union connections in a broad range of configurations and sizes from 2" and 3" and in pressure ratings to 15, 000 psi NSCWP*. Manufactured from high strength alloy steel, BHT integrals feature a lightweight design which is not found in competitors' products. All BHT integral union connections are subjected to controlled heat-treat process. 

Details :

• Size : 2" 
• End Type : customized 
• Test Pressure : 9, 000psi 
• CWP : 6, 000psi (413.68 bar) 
• Service : Standard, H2S 
• Used for Cementing, Drill Mud, Fracturing Fluids, Well Servicing 
• MTR and Test Report are offered at any time 

BHT Figure 206 Hose Fitting is constructed of high quality cast ductile iron. This union is also referred to as a Hose Barb Union. It features a union end connection that is interchangeable with a figure 200/206 connection, and it comes with an integral hose shank on both the male and female sub. The figure 206 union is designed to save time and money by eliminating the need to weld a hose nipple onto a figure 200/206 hammer union. This union is uniquely designed to be tested to twice the rated working pressure, which is often a requirement for hoses used in oilfield applications. 

BHT hose loops are used for a variety of high pressure well service applications including discharge lines, water lines, cementing and circulating lines, well test lines and temporary flow lines. 

BHT hoses utilize field proven BHTswivel joints for greater flexibility, shock and vibration resistance, and more uniform flow. Also utilized are BHT wing union end connections for fast, pressure tight make-up and break-out. 

These rugged hoses handle a full range of fluids to cold working pressures up to 15, 000 psi and come in sizes and configurations to meet any need. Hoses for sour gas service are available at cold working pressure up to 10, 000 psi. OFE hoses are designed to easily and conveniently fold up for storage and transportation. 

Precision Finish  :

• Material Stainless Steel, Low Carbon or Inconel. 
• Dual Certification for low Carbon 
• Full Traceability 

This light weight piping is available in lengths up to 10 feet to handle fluids at cold working pressure to 15, 000 psi. They are used on high-pressure discharge lines, auxiliary flow lines, choke-and-kill lines and for abrasive applications. 

BHT 2" Fig. 1502 and 3" Fig 1502 Long Radius Swivel Joints have undergone a design enhancement, creating a superior and longer lasting product. New features have created a swivel with extended life while maintaining uniform flow. 

New features include : 

• Additional erosion material under critical ball race locations. 
• More stable assembly with better load distribution in 3" Fig. 1502 series, featuring longer ball race life. 
• Better distribution of material for more robust female ball care components in 2" Fig. 1502 and 3" Fig. 1502 models. 
• No danger for any mismatches.
• Available in traditional hammer union styles. 

BHT also manufactures flow line piping in non-pressure seal thread from 6, 000 to 15, 000 psi, up to 20 feet in length. 

Details :

• BHT Wellhead Flange Adapters are designed to be used in the upper most position on wellheads and therefore enables wireline and other well service operations to be performed through the wellhead into the well bore. 
• BHT Wellhead Flange Adapters are available in various bore sizes and with quick union connections compatible with Bowen and Otis type quick unions. Additionally, Flange /Adapters are supplied for standard or H2S service and working pressure up to 15, 000 psi.