Our Products

We offer a complete product range of HDPE Sprinkler Pipe, Sprinkler Nozzle, Ventury Injector, Mini Sprinkler Nozzle and HDPE Sprinkler Fittings

Ventury Injector

Number Of Flower Fertilizer Injector
Material Plastic
Features Operates At Low Pressure.

It is used instead of fertigation tank. It also delivers plant nutrient directly into the wetted zone. It is equipped with in-built check valve for protecting the injected liquid against back flow. It can be used with large variety of chemical and also needs less pressure. APPLICATIONS It is used for effective fertigation for different water soluble and liquid fertilizers through micro irrigation system on quantitative basis.

Ventury Model	Injection Rate lph	Motive Flow lph
3⁄4”	50 to 150	1500 to 2000
1”	200 to 450	4000 to 7000
11⁄2″	450 to 1000	5000 to 12000
2″Low Flow	450 to 1000	5000 to 11000
2”	1000 to 2300	12500 to 30000

View Complete Details

Ask Latest Price & Details

Sprinkler Nozzle

Material Bronze, Brass, SS
Packaging Type Bronze, Brass
Application Pulses, Oil Seeds, Close Spacing Crops Irrigation
Connection Type 3/4
Trajectory Angle 27 Degrees
Discharge Rate Plastic Nozzle 1400-2200 LPH
Discharge Rate Brass Nozzle 1800-2100 LPH
Pressure Range 1-3 Kg/cm2

Body of the nozzle is made of bronze, has brass bearings sleeve and stainless-steel springs. It has a trajectory angle of 27. It is available in engineering plastic and in a 34 BSP Male Thread Connection. APPLICATIONS All close spacing crops with shifting ( As Portable Syetem ) Spices Vegetables Cereals Pulses Oil Seeds etc SPECIFICATIONS Plastic Nozzle :. with discharge 1400 LPH to 2200 LPH in 1 kg/cm2 to 3 kg/cm2 pressure. Brass Nozzle :. with discharge 1800 LPH to 2100 LPH in 1 kg/cm2 to 3 kg/cm2 pressure.

View Complete Details

Ask Latest Price & Details

HDPE Sprinkler Pipe

Material High-Density Polyethylene
Sizes 63mm, 75mm
Recommended Pipe Spacing 12 Mtr
Recommended Sprinkler Spacing 12 Mtr
Coverage Diameter 11 To 13 Mtr
Operating Pressure Range 2 To 4Kg/cm2
Applications Pulses, Oil Seeds, Etc.

It is made according to IS: 14151(part 2) in 63mm, 75mm, 90mm, 110mm sizes. It is made of 100% virgin materials with homogenous fusion welded joints. Moulded fittings are manufactured with cutting edge technology. APPLICATIONS All close spacing crops. Spices Vegetables Cereals Pulses Oil Seeds etc Also available in Engineering Plastic. SPECIFICATIONS HDPE Pipes & Fittings Sizes : 63mm, 75mm, 90mm and 110mm Recommended Pipe Spacing : 12 mtr Recommended Sprinkler Spacing : 12 mtr Coverage Diameter : 11 to 13 mtr Operating Pressure Range : 2 to 4 kg/cm2

View Complete Details

Ask Latest Price & Details

HDPE Sprinkler Fittings

Material HDPE
Size 63mm, 75mm
Joint Type Homogeneous Fusion Welded
Technology Cutting Edge
Applications Sprinkler Irrigation Assembly
Operating Pressure Range 2 To 4 Kg/cm2

Manufactured in 63mm, 75mm, 90mm and 110mm, sizes. Made of 100% virgin materials. Homogeneous fusion welded joints. Moulded fittings manufactured with cutting edge technology APPLICATIONS Used for Assemble Sprinkler Irrigation Product. SPECIFICATIONS Fittings Sizes : 63mm, 75mm, 90mm and 110mm Operating Pressure Range : 2 to 4 kg/cm2

View Complete Details

Ask Latest Price & Details

Mini Sprinkler Nozzle

Number Of Flower Sprinkler Nozzles
Material Engineering Plastic
Application Irrigation For Various Crops
Inlet Size 1/2 Inch Male Threaded
Distance Between Sprinklers 10-12 Meters
Application Rate 4-5 Mm/hour
Special Features Easy To Install And Dismantle

It is made of engineering plastic for durability and is easy to install and dismantle. It can operate at low pressure and has a long life span. Uniform water application maintains optimum soil air and moisture ratio. Fine droplets and shorter irrigation intervals creates micro climatic conditions which are beneficial for crop. Low application rate makes it environment friendly, avoids leaching of soil & fertilizers in ground water, no soil erosion. APPLICATIONS Versatile, can be used for variety of crops like Potato, Onion, Garlic, Ginger, Cabbage, Cauliflower, Strawberry, Groundnut, Mustard, Pulses, Cereals, oil seeds Tea & Nursery. 2-3 crops can be taken in a year. SPECIFICATIONS 12 male threaded inlet Distance between sprinklers : 10-12 mtr Color coded nozzles for easy identification of size Application rate 4-5 mm/ hour Part and full circles models

View Complete Details

Ask Latest Price & Details

Hdpe Pipes

Material High Density PolyEthylene
Number Of Flower Underground And Overgrown
Pressure Rating 2.5 Kg/cm2 To 20kg/cm2
Feature Lightweight, Flexible
Sizes Available 20mm To 110mm
Coil Lengths Available 50, 100, 150
Compliance IS 4984 Standard

BHUVA HDPE pipes are suitable for underground & overgrown installations and are available in 20mm to 110mm sizes. BHUVA HDPE pipes are also available in coils of 50, 100, 150, & up to 300 Mt. in length. The pipes to be used in the system are made up from 100% vergin High Density PolyEthylene Granuals. It also compare or passes the IS standard mark as per IS 4984. This pipe is light in weight, flexible & highly durable. SPECIFICATIONS 20mm to 110mm in 2.5 kg/cm2 to 20kg/cm2

View Complete Details

Ask Latest Price & Details

Tell Us What are you looking for? Will call you back

Contact Us

Hitesh Bhikhabhai Kyada (Bhuva Polyplast Pvt. Ltd.)
Survey no 105,plot no 1 &2,rnNational Highway 27rnVil.: BhunavarnTal.: GondalrnDist.: Rajkot, Gujarat, India
Share us via
Found Something Wrong with this Listing? Report Here.